🛠️ What did you do to your Tremor today? [2026 edition]

[Dpsmedic]

Looks great but my OCD is going crazy - Please rotate those bezels 180 degrees!!!!

Is this better?

 

[Toxophilite]

I. Am. Broken.

 

[Blade420Play🔪🏆]

Is this better? View attachment 276105

EEEEVILLLLL

 

[Dude]

SPE spin on fuel filter kit
Loose a qt of fuel

 

[armorross]

Today I learned that the hub caps are clipped into place. Yes, I know now, duh.

I also personally learned the stock jack is trash.

 

[JoeCO]

Today I learned that the hub caps are clipped into place. Yes, I know now, duh.

I also personally learned the stock jack is trash.View attachment 276162

Curious, does the jack kit have a suitable pry bar to remove the cap? Doubt it but have to ask!

 

[SWFLGuy]

Yes it does

 

[Blade420Play🔪🏆]

Curious, does the jack kit have a suitable pry bar to remove the cap? Doubt it but have to ask!

I just backed them off with the lugs using an impact. Then, I tossed them into my garage and haven't looked back.

 

[JoeCO]

I just backed them off with the lugs using an impact. Then, I tossed them into my garage and haven't looked back.

Thats what I did but was curious if there was a “proper” way!

 

[armorross]

Curious, does the jack kit have a suitable pry bar to remove the cap? Doubt it but have to ask!

Yes, the lug nut bar has it.

 

[MVI]

Today I learned that the hub caps are clipped into place. Yes, I know now, duh.

I also personally learned the stock jack is trash.View attachment 276162

some of us bought F450 or F550 Jacks off eBay that fit the stock location -

The Perfect Hydraulic Jack - Almost

I have been searching for a very specific hydraulic jack, and this one is almost perfect. Like many of you, I have larger tires, and the standard bottle jack that comes with the truck is barely (if at all) capable of lifting my axle high enough to get a tire on, and it's not hydraulic. I know...

www.fordtremor.com

DUALLY 6 Ton Bottle Jack & Tool Roll Spare Tire Lug Nut Wrench SUPER DUTY F550

 

[SWFLGuy]

I bought the hood guard and theft plate from Omaha Bravo and the motohorns 2X kit, when I receive the guards and wiring harness I’ll be taking the grill off and getting to it.
I also got a set of Legmars quad mounts and once I acquire the lights that will be my next project.
That will be 2 of the upfitters taken (and probably the cheapest) and then on to figure out where to go from there.
Hoping for good holiday sales most likely..

 

[Tugboat]

Updated to TufSkinz Tremor Vent Replacement Badge from the September Group Buy.
Before:

After:

Installation tips:

• Use directed heat gun to soften OEM badge adhesive,
• Lift badge with small bladed screw driver,
• Use 20lb test fishing line threaded under OEM badge to remove cleanly
• Lift off ½ inch of paper backing on Tremor badge from the "square end" of the badge
• Use heat gun to soften any adhesive residue left by removal of OEM badge
• Place "square end" of Tremor badge against fender vent press to seat then peel off paper backing seating the badge -note butting up "square end" of badge to fender vent seemed to give the most precise fit and "Yes Virginia he's OCD"

Heat gun used was one from back in the day from building PC's and wiringing harnesses, much better than hair dryer as heat is focused and directed minizing risk of damage to paint

 

[The Evil Twin]

some of us bought F450 or F550 Jacks off eBay that fit the stock location -

The Perfect Hydraulic Jack - Almost

I have been searching for a very specific hydraulic jack, and this one is almost perfect. Like many of you, I have larger tires, and the standard bottle jack that comes with the truck is barely (if at all) capable of lifting my axle high enough to get a tire on, and it's not hydraulic. I know...

www.fordtremor.com

DUALLY 6 Ton Bottle Jack & Tool Roll Spare Tire Lug Nut Wrench SUPER DUTY F550

View attachment 276170

100%!
Got one myself. Tested and approved!

 

[MVI]

I picked up the 4 ton jack today also

Jack's to me are like good whiskey or fine wine.
I seem to have more than I can realistically use.

 

[Blade420Play🔪🏆]

I picked up the 4 ton jack today also

View attachment 276201

View attachment 276202

Jack's to me are like good whiskey or fine wine.
I seem to have more than I can realistically use.

I mean, realistically, you could use as many jacks as you want. Rationally, on the other hand... 4 is good.

Now, I've used as many as six when jacking up beams under/in a house.

 

[MVI]

I've used 12 jacks to lift an old barn once.
I have a couple of Toe Jacks that are handy as hell for lifting mills and lathes.

 

[JoeCO]

I keep a jack in the truck that I got from E trailer. I think it’s called Tall Boy or something like that.

It works well for lifted vehicles (mine is stock Tremor height) and my travel trailer.