🛠️ What did you do to your Tremor today? [2026 edition]

2026 Upgraded 150DB Dual... https://www.amazon.com/dp/B0GV3JMFRT?ref=ppx_pop_mob_ap_share

So, I wanted motohorn but didn't want to spend the money. I found this guy on Amazon and installed it today. Haven't used it except for a super short bop. Will find a place to record it later (that's not in my neighborhood 😜)
 
Agree! Thanks! I will paint the rear soon. I’d love to black it out the rest of the way (wheels and all) but it’s pretty good looking as is. I’ll paint the hubs soon. Otherwise, I’ll probably just install vhf/uhf comms and maybe do some practical stuff and drive him around. lol.

I DO wonder if I should grab the PPE transmission coolant bypass valve. Coming from a gmc where I replaced the thermostat so the cooler kicked in sooner, the temps that the super duty transmission shows freaks me out a little.

I may add some lights sooner but other than that, I think I’ll wait to do end of life upgrades on things like tires and suspension.
Do some reading on transmission temps and overcooling the fluid before the bypass. There is a point where cooler fluid is “not cool”.
 
Do some reading on transmission temps and overcooling the fluid before the bypass. There is a point where cooler fluid is “not cool”.
So a solution in search of a problem here?
 
Come on man. Park in front of the HOA presidents house and let er rip!
HOA... 🤣🤣🤣
Very luckily, I live in a non-HOA neighborhood within a town filled with HOAs 😎😜🤣🤣🤣
I drove by my friends in front of the hood and blared it for a 3 second pass. About to text him if he heard the train today 😜
 
So a solution in search of a problem here?
That’s basically the conclusion I came to. Folks often think that 210 degree trans oil (it’s a multi viscosity oil dyed red) is going to grenade the thing. It’s what we have stuck in our heads from the old ATF+4 days where >200 was flirting with degradation of the oil. That’s not the case today. Modern synthetic oils can withstand >250 degs for short periods. Oils operating 215-230 degs can run all day like that.
 
That’s basically the conclusion I came to. Folks often think that 210 degree trans oil (it’s a multi viscosity oil dyed red) is going to grenade the thing. It’s what we have stuck in our heads from the old ATF+4 days where >200 was flirting with degradation of the oil. That’s not the case today. Modern synthetic oils can withstand >250 degs for short periods. Oils operating 215-230 degs can run all day like that.
Good, mine stays around 219-221 loaded or not
 
Good, mine stays around 219-221 loaded or not
Interesting. Last weekend mine stayed under 212 even hauling 15ish k down the interstate with ambient temps around 98. I did see a peak of 216 in traffic so I swapped to manual shift to lock out gears and tucked between two tractor trailers.
 
Joined the double deuce 40s club today with @Optimus🤖 saw some Mickey Thompson MTZ with black rhino wheels pop up on market place an hr from my house in 40x14.5r20 with about 5k miles and snagged them for $2,000. These baby's fit like a glove zero rubbing!!!
 

Attachments

  • 20260815_153854.webp
    20260815_153854.webp
    767.5 KB · Views: 1,184
  • 20260815_153921.webp
    20260815_153921.webp
    732.9 KB · Views: 82
  • 20260815_153912.webp
    20260815_153912.webp
    741.8 KB · Views: 73
  • 20260815_153902.webp
    20260815_153902.webp
    735.7 KB · Views: 81
Joined the double deuce 40s club today with @Optimus🤖 saw some Mickey Thompson MTZ with black rhino wheels pop up on market place an hr from my house in 40x14.5r20 with about 5k miles and snagged them for $2,000. These baby's fit like a glove zero rubbing!!!
That turned out SO GOOD 😍
 
Thanks gta love marketplace impulse buys. I've been eyeing 40s since the lift and these gave me the push this morning for 2k with wheels and tires couldn't go wrong. Plus I kinda like the bronze accent on the blue.
Yeah, that’s pretty close to what I would have done if I had the balls to buy an AMB truck. Bronze with the blue looks awesome.

Mine is the same height as yours but I’m waiting for my 38s to wear down before going to 40s. Hoping to stick to 17s but options are super limited.

The offset on your setup is 👌🏼
 
Yeah, that’s pretty close to what I would have done if I had the balls to buy an AMB truck. Bronze with the blue looks awesome.

Mine is the same height as yours but I’m waiting for my 38s to wear down before going to 40s. Hoping to stick to 17s but options are super limited.

The offset on your setup is 👌🏼
Thats what my problem was in 18s the options for 40s were so limited. You really need to find the tire you want and buy wheels to fit them when you get to 40s.
 
  • Like
Reactions: McE
Joined the double deuce 40s club today with @Optimus🤖 saw some Mickey Thompson MTZ with black rhino wheels pop up on market place an hr from my house in 40x14.5r20 with about 5k miles and snagged them for $2,000. These baby's fit like a glove zero rubbing!!!
Hell yeah brother! Congratulations! Glad they worked out. The stance looks killer. You got an unbelievable deal.

Welcome to the club! 👊
 
Wish I could get 40’s
 
Wish I could get 40’s
You're never too young or too old my friend! I highly recommend them in their 40's. It's when they get to 80 do the real problems occur. She was a nice lady too. Still waiting on that check.

I always say "If there's a will, there's a way!"
 
You're never too young or too old my friend! I highly recommend them in their 40's. It's when they get to 80 do the real problems occur. She was a nice lady too. Still waiting on that check.

I always say "If there's a will, there's a way!"

You got to start when they are 70, to get to the will. From a friend..... :oops: :oops: :oops: :oops: 🤣 🤣 🤣 🤣 🤣

:cool::cool:☕☕🇺🇲🇺🇲🇺🇲🇺🇲
 
Thought I saw in this thread a low profile cleat option for the DB covers. Can’t find it now.
Anyone point me to the post or product?
 
Back
Top Bottom