🛠️ What did you do to your Tremor today? [2026 edition]

@NEOHIO ’s dieselcurrent.com wiring harness installed today. He bundled a USB a/c/c adapter (for me to hide behind the glovebox and power my dashcam and a couple always-on usbc for personal electronics to charge) with hardwire “12v” pos and neg 12ga wire 6’ long and sheathed for protection. I have run it to the center console along the trim by the left side of the passenger footwell. I will eventually carefully drill into there so I can mount the radio of choice. I will wire it with Anderson power pole connectors since I run various mobiles for foot and vehicle based operations.

The harness is well made- purposefully chosen oem or better specifications and he will put up with several pages of incoherent private messages to build you what you want! And ship it very quickly!
I appreciate the feedback!
 
I might have to acquire some of these and try them out. I have some motorcycle cam buckle tie downs I use quite a bit. Like these:


...or some standard rubber tie downs as both options are quick and sufficient for most of my needs.
I only pull out the ratchet straps when I need extra length, but I see you can also get an extension for the tork strap. :unsure:
@OmahaBravo great recommendation on the straps! They worked out great for the first phase of our move (all of our stuff to a rental or storage). I ended up getting a set of 12 which came with two nice roll bags for storage. At one point I had 10 of them in usage when I moved all my workshop stuff. Super quick and in all of our loads nothing ever shifted. (y)
 
We carry Borla and Ford Performance/Ford Racing here at Apollo. Feel free to send me a message if we can offer a quote. Happy to help!

Where I bought mine!
 
Installed the raptor steering wheel with the pro power diesel harness. Works great! just gotta see if I can find in forscan a way to make there heated steering wheel button work (I have factory heated steering wheel already).

also peeled off the 4x4 stickers on the bed side, I like the cleaner look.

Looking into getting my side mirrors painted/paint matched but sheesh are they expensive lol.
 
Last edited:
just gotta see if I can find in forscan a way to make there heated steering wheel button work
The one on the steering wheel pod is for steering modes on the Raptor, not heat.
 
@NEOHIO ’s dieselcurrent.com wiring harness installed today. He bundled a USB a/c/c adapter (for me to hide behind the glovebox and power my dashcam and a couple always-on usbc for personal electronics to charge) with hardwire “12v” pos and neg 12ga wire 6’ long and sheathed for protection. I have run it to the center console along the trim by the left side of the passenger footwell. I will eventually carefully drill into there so I can mount the radio of choice. I will wire it with Anderson power pole connectors since I run various mobiles for foot and vehicle based operations.

The harness is well made- purposefully chosen oem or better parts specifications and he will put up with several pages of incoherent private messages to build you what you want! And ship it very quickly!
Glad you shared this. I'd been meaning to buy that Aux cleanup kit for my truck and kept forgetting. Just snagged it from @NEOHIO.
Where I bought mine!
Thanks again!
 
Finally decided my stock tires had enough. Toyo Open Country AT3’s. Went up a size to 295/65R20. So far I like them.
IMG_4392.webp
 
Finally got Marshall a supporting membership and then towed WITH him to a state park for the weekend!
 
Last edited:
Which park, and I'll need reviews..... Starting with:
Is it full hook ups?
😎
We go all over the panhandle and south GA. Within 200 miles of Tallahassee. So far, dump stations everywhere but no full septic. We are mostly weekend folks- the XLS 17 has enough water capacity for 3 days of gray water without either of us being super stingy.

This is a park with cool trails and backpacking spots- but not full septic.
 
We carry Borla and Ford Performance/Ford Racing here at Apollo. Feel free to send me a message if we can offer a quote. Happy to help!


@Nick@ApolloOff-Road Ordered and received! My son and I installed the exhaust tonight. We managed to get the rear muffler section over the rear axle with the spare tire removed without jacking the truck up. I wanted to keep the oem exhaust uncut and available as I had concerns with the HOA and how the Borla would be.

Exhaust is everything I want it to be. Appears when you want it, nice rumble and VERY subtle in normal conditions. Will drive it more this weekend!
 
Installed today and torqued to spec.
IMG_4158.webp

 
Installed today and torqued to spec.
View attachment 266047
Looks good with the nekkid hubs!
 
Looks good with the nekkid hubs!
Agree! Thanks! I’d love to black it out the rest of the way (wheels and all) but it’s pretty good looking as is. I’ll paint the hubs soon. Otherwise, I’ll probably just install vhf/uhf comms and maybe do some practical stuff and drive him around. lol.

I DO wonder if I should grab the PPE transmission coolant bypass valve. Coming from a gmc where I replaced the thermostat so the cooler kicked in sooner, the temps that the super duty transmission shows freaks me out a little.

I may add some lights sooner but other than that, I think I’ll wait to do end of life upgrades on things like tires and suspension.
 
Last edited:
Back
Top Bottom