🛠️ What did you do to your Tremor today? [2019-2024]

[cs0430]

That looks great! What year is your truck? I have a 24, think it'll fit a 24?

Thank you. My truck is also a '24.

 

[Crimson23]

Thank you. My truck is also a '24.

Nice. Did you get them from Lakeland Ford, what tools do you need to change out?

 

[Blue Devil]

I installed a couple of cell phone holders today and I wanted to install a powerpoint under the plate but there is no room there any more. The space between the head unit, buttons, etc there's not enough room any more. What are others doing on MY23/24 for this?

I don't want to have wires hanging down the face of the dash......

 

[njburn]

I installed a couple of cell phone holders today and I wanted to install a powerpoint under the plate but there is no room there any more. The space between the head unit, buttons, etc there's not enough room any more. What are others doing on MY23/24 for this?

I don't want to have wires hanging down the face of the dash......

View attachment 161517

@Chris-DTA just put one in his, it is in his build thread.

Rossmonster Truck Build – 2024 F350 (long wheelbase)

The Baja Design LP4s have been installed. It was a long day, and it actually started yesterday afternoon. I went ahead and installed the SDHQ mounting brackets on my 2024 F350. The instructions were good, but not perfect. I also watched the YouYube video of a fellow forum member (@DIYRay), which...

www.fordtremor.com

 

[Blue Devil]

@Chris-DTA just put one in his, it is in his build thread.

Rossmonster Truck Build – 2024 F350 (long wheelbase)

The Baja Design LP4s have been installed. It was a long day, and it actually started yesterday afternoon. I went ahead and installed the SDHQ mounting brackets on my 2024 F350. The instructions were good, but not perfect. I also watched the YouYube video of a fellow forum member (@DIYRay), which...

www.fordtremor.com

Great stuff! Will need to see how his turns out. I need to be able to get Fast Charging out of this.

 

[thatdood]

Finally brought her home today.

 

[MJM_MWF]

I installed a couple of cell phone holders today and I wanted to install a powerpoint under the plate but there is no room there any more. The space between the head unit, buttons, etc there's not enough room any more. What are others doing on MY23/24 for this?

I don't want to have wires hanging down the face of the dash......

View attachment 161517

I went with course Motorsport wireless charger. Ran a low profile USB-c behind the upper trim piece and behind the infotainment screen, then fished it under the slide by the wireless charger area. Very happy how clean it looks

 

[OmahaBravo]

HDC button swap and associated FORScan change.

How did the button swap take fordpass points? Help a newb out... whats the associate forscan change?

 

[modified]

Swapped out the old oiled air filter for the Banks Dry Filter.

 

[BroncOh]

How did the button swap take fordpass points? Help a newb out... whats the associate forscan change?

Relocating center stack camera button

Since I have the center stack area torn apart getting ready to do inverter wiring, figured I would tackle this little mod at the same time. I will be relocating the camera button and put it next to the engine brake button, as those are the 2 most used buttons for me. :D Always disliked reaching...

www.fordtremor.com

 

[OmahaBravo]

Relocating center stack camera button

Since I have the center stack area torn apart getting ready to do inverter wiring, figured I would tackle this little mod at the same time. I will be relocating the camera button and put it next to the engine brake button, as those are the 2 most used buttons for me. :D Always disliked reaching...

www.fordtremor.com

So, i've read that before. Thats where i gained my knowledge on this. Which is why i'm confused b/c no mention of purchasing something or modifying something in forscan is mentioned in said thread.

 

[Modman]

So, i've read that before. Thats where i gained my knowledge on this. Which is why i'm confused b/c no mention of purchasing something or modifying something in forscan is mentioned in said thread.

Agree, those points still have me confused...

 

[Silver-Bolt]

Big day for mods. Removed the decals and badges. lol.

 

[cs0430]

Nice. Did you get them from Lakeland Ford, what tools do you need to change out?

I got them from fortpartsonsale.com. The only tool needed was a plastic trim removal tool. Just pry the one off and the new one snaps right on. Couldn't be easier. @Devenhallen started this thread about it: https://www.fordtremor.com/threads/platinum-center-console-trim-upgrade.18366/

I used the "charcoal" Rit as it was a little lighter than the graphite used in that thread.

 

[Crimson23]

I got them from fortpartsonsale.com. The only tool needed was a plastic trim removal tool. Just pry the one off and the new one snaps right on. Couldn't be easier. @Devenhallen started this thread about it: https://www.fordtremor.com/threads/platinum-center-console-trim-upgrade.18366/

I used the "charcoal" Rit as it was a little lighter than the graphite used in that thread.

View attachment 161623

Great, thanks for the info!

 

[Joeram44]

Installed two PMF 1/4 spacers in the front drivers side coil spring today to eliminate the Super Duty lean to the left that was driving me crazy.

 

[Avslash]

View attachment 161479
Platinum trim upgrade. Dyed the stitching and installed in about 30 min. No more squeak.

You got a part number for those? Kind of curious what my upholstery guy would charge to recover them in KR leather.

 

[wearenh]

You got a part number for those? Kind of curious what my upholstery guy would charge to recover them in KR leather.

Don't bother recovering them, buy them in King Ranch Leather

FORD PARTS ON SALE

OEM FORD PARTS DIRECT

The part numbers are

PC3Z-2604608-CB (right) - BLACK
PC3Z-2604609-CB (left) - BLACK

PC3Z-2604608-CA (right) - MESA - Confirmed to be for KING RANCH - $30.33
PC3Z-2604609-CA (left) - MESA - - Confirmed to be for KING RANCH - $43.58

PC3Z-2604608-EA (right) - LIGHT SLATE
PC3Z-2604609-EA (left) - LIGHT SLATE

PC3Z-2604608-AF (right) - KRYPTO GREY
PC3Z-2604609-AF (left) - KRYPTO GREY

Here is an entire thread dedicated to this:

TRIM THREAD



.

 

[OmahaBravo]

Moving on to installing the Bulletpoint Rubigrid panel in the dash. It takes up the whole thing (unlike Builtrights, but was cheaper) so i bought these low profile usb c outlets to provide power. Need to test them though.

These outlets work really well but only take 5V input. Therefore you'll need a buck converter.
So, im changing directions as I dont want my usb c outlets limited to 15W.

 

[Mas13pharmd]

Got the new Black Rhino wheels mounted today really happy with the look and offset with how they fill put the Buschwacker Fender Flares. Gives the truck alot more presence in person.