Water Intrusion to Fuse Box - Whiteface Ford

[01tundra]

Another run of v1's is now in stock.

With help from @Rodd187 these are now compatible with 2020 and newer. All we had to do was shorten the deflector by 1/2" to get it to clear, which means a single model for all 2020+ trucks.

Ford Super Duty Fuse Box Water Deflector (2020+)

Protect your Super Duty's battery junction box from water damage. Snaps on in seconds, no tools or drilling required. ASA construction for engine bay durability.

functionfirstdesign.com

I'm starting production on v2 after this run of v1's and have all of the other materials on order for the hoses, clamps, thumbscrews, etc. I expect to have at lease some v2's available by next week.

So your V2 will have a drain hose outlet connection on the bottom?

 

[FunctionFirstDesign]

So your V2 will have a drain hose outlet connection on the bottom?

Yes it will.

 

[Bignc]

i bought just now. not sure of the difference between v1 and v2 but would happily send the difference to get the newer version. i misunderstood and thought “back in stock “
was v2. Either one is better than. nothing i’m sure!

 

[Bignc]

i bought just now. not sure of the difference between v1 and v2 but would happily send the difference to get the newer version. i misunderstood and thought “back in stock “
was v2. Either one is better than. nothing i’m sure!

Oops now I see lol

 

[securityguy]

OCD on my '22.

If I had a printer I'd make a few tweaks to this design.......needs to be extended on the sides to provide a little more coverage IMO. Also wish the outlet nozzle was tilted back toward the firewall at a 45 degree angle, there's a perfect place to route a drain hose against the firewall, behind the fuse box and next to the AC lines (where the red arrow is pointing in the picture below).

I also used this seal to make a dam on the ledge of the cowl to keep water heading the right direction -

https://www.amazon.com/dp/B0FNCWDTJ4?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

View attachment 275537.

If I were you, I'd get rid of that POS design and get the one from www.functionfirstdesign.com and never look back. AWESOME design and works great!

 

[FunctionFirstDesign]

Oops now I see lol

If you want to wait on v2 just give me your order number and I can cancel it. Should be next week.

 

[Koach]

Please put me on the list for a v2 and a drivers side. Thanks,

 

[Monoman]

If you want to wait on v2 just give me your order number and I can cancel it. Should be next week.

For those of us that have not placed an order, would you rather we wait or order now and message you the order number to put it on hold?

 

[FunctionFirstDesign]

For those of us that have not placed an order, would you rather we wait or order now and message you the order number to put it on hold?

Please wait until v2 is live on our site to place the order. I always post availability here first. It won’t be long.

 

[Optimus🤖]

Got The OCD Plug product. Should be a bit larger. I'll order the V2 to support our forum vendor. Rarely rains here anyways so it's all good.

@FunctionFirstDesign: If you send me a bunch of V2s, I'll bring them to SEMA and sell them for $199.

 

[FunctionFirstDesign]

Got The OCD Plug product. Should be a bit larger. I'll order the V2 to support our forum vendor. Rarely rains here anyways so it's all good.

View attachment 275600
View attachment 275601View attachment 275602View attachment 275603

@FunctionFirstDesign: If you send me a bunch of V2s, I'll bring them to SEMA and sell them for $199.

Certainly appreciate the support. You might just get a *little* something special with your order…