Stock Tremor Height

[thegrayatsv]

2020 started the 1 inch lower from 2017 to 2019

Got it. And the Tremor package started in 2020 so all Tremors are the same height. Thanks.

 

[FatDog]

Well.......you if it's close and you get a good enough run, it will fit!! ?

 

[JakePs]

I’ve never measured the height of the truck, but with 80 psi in the rears the truck fits fine w a couple inches to spare in my 84” garage opening.

Awesome!

 

[Chris21667]

Well.......you if it's close and you get a good enough run, it will fit!! ?

it is fits .. it ships!!!!!!

 

[Akwagon]

yea alot of people have removed that weather trim ....
someone did make there garage door opening bigger

Ahhhh the things we do for our trucks.

 

[Chris21667]

Ahhhh the things we do for our trucks.

Damn right... I am going to build a garage with a house on top ... 4 doors 12 ft tall and 3 lifts with the possible parking of at least 10 trucks 3 doors on more side and the 4th door on the other side so you could pull thought

 

[Briski]

I took the trim off the garage to get just over 84” and it fits. Really close when I stopped and looked. It’s level going in so I was confident it would clear.

 

[Loshad]

I'm so glad that I designed my garage door at 8'!

 

[Briski]

I'm so glad that I designed my garage door at 8'!

You don’t have to worry about this! Good foresight going 8’. I never thought I would have such a large beast of a truck.

 

[Loshad]

Oh, wait, what garage? I heard there's one back there.

 

[DesertMC]

Just took delivery of my 2021 Carbonized Gray F250 6.7. I carefully pulled into my 7 ft garage and successfully cleared the weather stripping on the garage opening (height to strip 83.5 inches). I will take photo and when I figure how to insert I will share.

 

[Darkside]

I'm so glad that I designed my garage door at 8'!

I did a 9 high 12 wide when I designed my garage. Can never be too big

 

[thkbaron]

has anyone leveled theirs and still got it in the 7 foot garage door? Should still fit technically.

 

[JASmith]

Just picked my Tremor up yesterday and i'm 99.999% confident it'll hit the weather strip, and probably scratch the board above, even though I have the full 7' opening, minus the .5" from the weather stripping. I might have to get reeeeaal close today when I have the wife to keep an eye on me. I'll need to buy a half inch somewhere... story of my life.

 

[PapaRaptor]

has anyone leveled theirs and still got it in the 7 foot garage door? Should still fit technically.

Depends if you have cab clearance lights.

 

[cookiemonster]

Just picked my Tremor up yesterday and i'm 99.999% confident it'll hit the weather strip, and probably scratch the board above, even though I have the full 7' opening, minus the .5" from the weather stripping. I might have to get reeeeaal close today when I have the wife to keep an eye on me. I'll need to buy a half inch somewhere... story of my life.

If you have a full 7' opening, then you should be good to go.

 

[kmaxwelliii]

Just picked my Tremor up yesterday and i'm 99.999% confident it'll hit the weather strip, and probably scratch the board above, even though I have the full 7' opening, minus the .5" from the weather stripping. I might have to get reeeeaal close today when I have the wife to keep an eye on me. I'll need to buy a half inch somewhere... story of my life.

Did it make it in without hitting? My garage at work is 84" and I'm a little nervous. Salesman told me the Tremor was 81.5".

 

[JASmith]

Did it make it in without hitting? My garage at work is 84" and I'm a little nervous. Salesman told me the Tremor was 81.5".

Not quite. My opening was exactly 7’… minus the door sweep seal trim piece. I was scraping the trim board and would have ripped the sweep off, when I first tried with only about 1/4 tank. I took that sweep off, added a couple hundred pounds of sand bags and full diesel tank and then I was able to get in.

I’ve since installed the PMF reverse level Tremor kit 1.5” yesterday and I don’t have to worry about fuel level or the sand bags anymore. Going to put the trim back up soon.

 

[BettyWhite]

Does anyone know if the 2021 Tremor is the same height as the 2020? I know the 2021 non-Tremor Super Duty was lowered 1 inch from 2020 spec.

There the same
17-19 non tremor were 1in taller than 2020+

 

[Trophyhunter01]

Tried to measure mine the other day and got 82.5, parking garage is 86, makes it by about 3 fingers….