Rodd187 Build Thread

What tune did you go with (brand)? That’s impressive mpg. It’s surprising how quiet these trucks are even with a straight pipe.
 
Tugboat said:
It's all good, please keep us posted. My Pedal Monster is set pretty low City -4 and it'll break rear tires loose-
Somehow thinking you'll really enjoy putting pedal to the metal 🥳
Click to expand...
I was reminded by a friend that you did the PPE manifold and the intercooler at the same time. It is probably due to the combo install of the manifold and intercooler that you feel the added throttle response. I installed the Pusher manifold awhile back and did definitely notice the increased throttle response and throatier sound.

I am going to get the truck out this weekend and really put it through its paces just to see if there is any added benefit other than additional cooling of the IAT sensor. With the Pusher, delete, tune, Monster exhaust, etc. the truck runs like a dream and has a ridiculous amount or power.
 
Explorerinil said:
What tune did you go with (brand)? That’s impressive mpg. It’s surprising how quiet these trucks are even with a straight pipe.
Click to expand...
This is actually a custom tune done by a friend and I know what you mean, I expected it to be a little louder considering it was a straight shot from the exhaust manifold to the tip. It does sound pretty sweet though when I run the high idle.
 
Rodd187 said:
This is actually a custom tune done by a friend and I know what you mean, I expected it to be a little louder considering it was a straight shot from the exhaust manifold to the tip. It does sound pretty sweet though when I run the high idle.
Click to expand...
Yeah high idle or a cold start sounds amazing. I run a 4 inch straight pipe into my old 5 inch dpf back exhaust. It’s not loud at all, I tow my boat all the time with the family, no complaints of drone. I almost put a Donaldson muffler on it, but both my wife and son told me to leave it alone. I run around on 37’s with a topper, which is loaded constantly. I got around 19-20 on the highway. Which I feel is very good considering what I have.
 
Definitely interested in hearing more about the PPE intercooler as a standalone upgrade. I did a full Pusher kit on my 2019 and plan to do the same on the new truck as well. Considering an intercooler upgrade as well, but would like some real world reports.
 
Nick@ApolloOff-Road said:
Definitely interested in hearing more about the PPE intercooler as a standalone upgrade. I did a full Pusher kit on my 2019 and plan to do the same on the new truck as well. Considering an intercooler upgrade as well, but would like some real world reports.
Click to expand...
Yes sir, I will report back in a few weeks or so
 
real world from iDash last week - PPE intake, PPE inner cooler, and stock air intake and filter
1776612132186.webp
 
Yesterday was hot - 101 according to Tremor's OAT temp sensor.
Screen shot from iDash - PPE intake and inner cooler along with supplement cooling system 100° IAT Charge Ait Temp 122° - in town trip to D&B Supply
1784297062091.webp
 
Hell yeah! I used to put them in the bed, but as I got smarter (older) it just sucked loading up after a long day.
As a bonus, if there is a small hill you can parallel park to, no ramp needed!
 
You must log in or register to reply here.

Tremor Forum Fav 👍

Long OEM Style Lug Nuts Black F250/F350 Long OEM Style Lug Nuts Black for 2017-2022 Ford F-250 F-350 Super Duty - Grab a set through Amazon!

Tremor Forum Photos

Latest Discussions

Back
Top Bottom