FYI 2022 Updated Production Schedule

Seems this thread has gone from a production update to a pure out rant…I, like everyone else on here are looking for information about production updates, dealers have always been crooks so no different in todays market. 2 months into the waiting process so I guess I’m not as angry as most but, I did the research and knew what I was getting into before I ordered.. Not trying to piss anyone off even more just wanted to speak my mind on a thread that I use to use for information not rants!
This thread is great for info but also works to vent and let some frustrations out to people that understand because they're going thru the same thing. I try to talk to my wife or friends about it but they don't get it. Here, at some point during the order process seems like everyone gets pissed so everyone here gets where I'm coming from when I bitch or rant. Just like I can empathize when others bitch. That may not be the intent of this thread but it helps me and I'm happy to have found this forum and more specifically this thread. If it weren't for this I would think the blue oval is shitting on me and I know a little bit of what to look out for in case they try.
 
I agree with @Texascaveman . People who are not in the same situation as us have zero sympathy. It's good to understand what's going on regardless if it's sensible or not and also good to vent. Hopefully, KTP starts kicking these damn things out and those of us still waiting will get some viable schedule information.
 
My truck was Built last night.

12-13-21 Order Placed
12-13-21 Order Confirmed
1-10-22 VIN Assigned
1-10-22 Scheduled for 3-21-22
2-15-22 Re-Scheduled to 3-14-22
3-3-22 Re-Scheduled to 3-21-22
3-15-22 In Production
3-16-22 Window Sticker
3-22-22 As-Built data - BCE Module code populated between 7:00PM – 11:30PM
3-23-22 Built email 03:49 AM - estimate for delivery is between April 4 and April 10
 
I hope platinums getting scheduled this week. Ordered 10-2-21 still no vin. Platinum 6.7 diesel moonroof loaded no adaptive steering removed bedliner and 5th wheel I hope to get scheduled tonight
 
My truck was Built last night.

12-13-21 Order Placed
12-13-21 Order Confirmed
1-10-22 VIN Assigned
1-10-22 Scheduled for 3-21-22
2-15-22 Re-Scheduled to 3-14-22
3-3-22 Re-Scheduled to 3-21-22
3-15-22 In Production
3-16-22 Window Sticker
3-22-22 As-Built data - BCE Module code populated between 7:00PM – 11:30PM
3-23-22 Built email 03:49 AM - estimate for delivery is between April 4 and April 10

What was your build? Great timeline.
 
View attachment 49324View attachment 49325
Went to pick up my truck today. Had some trouble with xplan pricing screwed around with that for a few hours. Went out to leave and saw a puddle under it. It was coolant. Of course service department had just closed so there it stayed. Off to a good start 😓. Can’t believe they took the hood light away and don’t paint the underside Of the hood or insides of the fenders. Michael at Rocky Mountain truck accessories in Billings did a great job on the winch.

Congrats! When you get your truck be sure and get up under the front bumper and take a look to be sure that when the winch was installed the bolts they used to secure the fairing/airdam - do not "stick up" into the winch housing where the roll of winch rope is. If they used the OEM bolts, they stick up and will catch the rope and damage it. You need to use shorter bolts. Typically it is just two of the four that are in the roll area other are no issue.

I had this issue as the dealer was not aware of this issue - I pulled those two out - headed to hardware store and get some shorter ones, put back in - 2 minute job, plus the trip to the hardware store. I just bought a few different size bolts at 30 cents a piece and used what worked - sorry I can't remember the proper length, but it was less than 1".

Here is a link to a thread on this - see post 20 for photo of issue;
link: https://www.fordtremor.com/threads/winch-rope-tear-from-bolt.8494/#post-178959

Here is what you are trying to avoid

1648047885662.png
 
Last edited:
Congrats! When you get your truck be sure and get up under the front bumper and take a look to be sure that when the winch was installed the bolts they used to secure the fairing/airdam - do not "stick up" into the winch housing where the roll of winch rope is. If they used the OEM bolts, they stick up and will catch the rope and damage it. You need to use shorter bolts. Typically it is just two of the four that are in the roll area other are no issue.

I had this issue as the dealer was not aware of this issue - I pulled those two out - headed to hardware store and get some shorter ones, put back in - 2 minute job, plus the trip to the hardware store. I just bought a few different size bolts at 30 cents a piece and used what worked - sorry I can't remember the proper length, but it was less than 1".

Here is a link to a thread on this - see post 20 for photo of issue;
link: https://www.fordtremor.com/attachments/img-0303-jpg.26522/

Here is what you are trying to avoid

View attachment 49343
Do you have a link to the thread? The link you provided was just to the photo.
 
Congrats! When you get your truck be sure and get up under the front bumper and take a look to be sure that when the winch was installed the bolts they used to secure the fairing/airdam - do not "stick up" into the winch housing where the roll of winch rope is. If they used the OEM bolts, they stick up and will catch the rope and damage it. You need to use shorter bolts. Typically it is just two of the four that are in the roll area other are no issue.

I had this issue as the dealer was not aware of this issue - I pulled those two out - headed to hardware store and get some shorter ones, put back in - 2 minute job, plus the trip to the hardware store. I just bought a few different size bolts at 30 cents a piece and used what worked - sorry I can't remember the proper length, but it was less than 1".

Here is a link to a thread on this - see post 20 for photo of issue;
link: https://www.fordtremor.com/attachments/img-0303-jpg.26522/

Here is what you are trying to avoid

View attachment 49343

Sure hope they warrantied your rope? That's nuts. I'd definitely be careful replacing any bolts on something that is supposed to be able to pull 12k lbs -- I'd be surprised if a 30 cent bolt has the same sheering strength as the factory bolts. Or corrosion resistance. Guess that really depends on what you are getting, grade 8 stainless I'd think to be a buck+ a bolt. Not that there's a world of difference in cost there but could be a world of difference if you have one or more sheer off under load!
 
Sure hope they warrantied your rope? That's nuts. I'd definitely be careful replacing any bolts on something that is supposed to be able to pull 12k lbs -- I'd be surprised if a 30 cent bolt has the same sheering strength as the factory bolts. Or corrosion resistance. Guess that really depends on what you are getting, grade 8 stainless I'd think to be a buck+ a bolt. Not that there's a world of difference in cost there but could be a world of difference if you have one or more sheer off under load!
They are just for trim pieces - no pull on bolts noted :)
 
Here is the proper link to the winch rope tear - bolt issue - fixed it in my post above as well.

 
Hello Everyone

I had a Tremor on order the last 8 months that just got delivered to the dealership. I no longer need the truck. Anyone wants to pick it up in Downers Grove, IL, please call the sales guy Jerry Kuebler on his cell 815-751-0183. This is a Silver F-250 SRW 4X4 Crew Cab Lariat 160” WB Styleside 7.3L with Ultimate Package, Blackout Package and a bunch of other options.
 
Hello Everyone

I had a Tremor on order the last 8 months that just got delivered to the dealership. I no longer need the truck. Anyone wants to pick it up in Downers Grove, IL, please call the sales guy Jerry Kuebler on his cell 815-751-0183. This is a Silver F-250 SRW 4X4 Crew Cab Lariat 160” WB Styleside 7.3L with Ultimate Package, Blackout Package and a bunch of other options.
To late... They've already put 15k markup on it. Lol just my guess
 
Congrats! When you get your truck be sure and get up under the front bumper and take a look to be sure that when the winch was installed the bolts they used to secure the fairing/airdam - do not "stick up" into the winch housing where the roll of winch rope is. If they used the OEM bolts, they stick up and will catch the rope and damage it. You need to use shorter bolts. Typically it is just two of the four that are in the roll area other are no issue.

I had this issue as the dealer was not aware of this issue - I pulled those two out - headed to hardware store and get some shorter ones, put back in - 2 minute job, plus the trip to the hardware store. I just bought a few different size bolts at 30 cents a piece and used what worked - sorry I can't remember the proper length, but it was less than 1".

Here is a link to a thread on this - see post 20 for photo of issue;
link: https://www.fordtremor.com/threads/winch-rope-tear-from-bolt.8494/#post-178959

Here is what you are trying to avoid

View attachment 49343
Thanks. I looked. They flipped them around but didn’t replace them
With cap head like the instructions say. Although at this point it probably doesn’t matter because they just called and said my truck needs a new engine so that’s cool. Wishing I’d kept my diesel now.
 
Thanks. I looked. They flipped them around but didn’t replace them
With cap head like the instructions say. Although at this point it probably doesn’t matter because they just called and said my truck needs a new engine so that’s cool. Wishing I’d kept my diesel now.
Well that sucks!
 
My truck was Built last night.

12-13-21 Order Placed
12-13-21 Order Confirmed
1-10-22 VIN Assigned
1-10-22 Scheduled for 3-21-22
2-15-22 Re-Scheduled to 3-14-22
3-3-22 Re-Scheduled to 3-21-22
3-15-22 In Production
3-16-22 Window Sticker
3-22-22 As-Built data - BCE Module code populated between 7:00PM – 11:30PM
3-23-22 Built email 03:49 AM - estimate for delivery is between April 4 and April 10
Really wishing I knew about the spray in liner and the 5th wheel when I ordered. My codes showed up 3/16. Still waiting for build email
 
Back
Top Bottom