Fuel additives [diesel]

I’ve tracked mileage for 34,000 miles with Amsoil additive, sometimes all-in-one, mostly thr cetane/cleaner combo. I’m gonna switch over to Ootilube summer+ for a while and see if I notice any change in performance. Amsoil runs me about $0.65/oz. I use 12-24oz per fill up (mostly 24oz, 60 gallon tank). The summer+ is about $0.55/oz and at max dose for 60 gallons is 6 oz. So very big price difference if it performs the same or better.
Wondering how you're making out with the Amsoil testing.

I'm using the rest of the 4in1 and then switching unless you have some interesting results.

I can definitely see Amsoil selling the same thing as Optilube at 10x the price 😭
 
Two tanks of Archoil & my mpg's increased a negative 4%. Went from 15.7 to 15.1...
 
Wondering how you're making out with the Amsoil testing.

I'm using the rest of the 4in1 and then switching unless you have some interesting results.

I can definitely see Amsoil selling the same thing as Optilube at 10x the price 😭
Jsut started so I’ll update when I have more data.
 
I asked Archoil how they clean the turbo with their formula. Here was the response:

“Our chemistry survives the combustion chamber and with the help from the heat of the exhaust cleans the build ups in the post combustion. Also, by creating a better combustion with clean injectors you create less soot and carbon to clean up.”

I asked do the exhaust gases carry it through the turbo? Their response:

“The exhaust gases carry it through the turbo, when your EGR is open it will carry it through the EGR valve and EGR cooler.”


I wonder if Opti-Lube’s does the same thing.
 

After watching I’m now seriously thinking of switching to PowerService additive when my Archoil 6500 runs out.
I ran archoil for awhile. I noticed my soot load was 15-20% across the range before an active regen. Now I changed two things, I put a 5 inch filter back exhaust and have ran two complete tanks of fuel from the station I always go to, but with optilube xpd. My soot load has been steady at 3%. Now is thus due to the filter back exhaust, which gave me a quicker active regen or is it optilube? Or I guess archoil caused more soot?
 
Interesting to say the least. I’ve been using Hot Shot’s EDT since my first fill-up. Not crazy about potassium being present (also with Opti Lube). Archoil containing high traces of iron doesn’t sound great either. May be switching from HSS once my bottle runs out.

My only issue with the video was this; Lake was driving a Cummins, and look, Power Service is the ONLY diesel additive approved by Cummins.

What’s one to do?
 
Interesting to say the least. I’ve been using Hot Shot’s EDT since my first fill-up. Not crazy about potassium being present (also with Opti Lube). Archoil containing high traces of iron doesn’t sound great either. May be switching from HSS once my bottle runs out.

My only issue with the video was this; Lake was driving a Cummins, and look, Power Service is the ONLY diesel additive approved by Cummins.

What’s one to do?
Basically he likes PS because it has no potassium and has a slight liberation increase. I see his point from the standpoint of someone that does oil analysis. I don’t analyze my oil, I want more lubricity in my fuel and added cetain which optilube does very well.
 
Cannot argue that potassium can “mask” another problem. However, there is no harm in having potassium in the fuel. To me, XPD was the clear winner here. Reducing the wear scar by half (way more than any other additive he tested) and the second highest in Cetane boost. I am using an additive primarily to help the CP4 pump. If you don’t have a CP4, then you are probably looking for different features in an additive (like Lane’s Cummins) Ford’s have the CP4 and the XPD was way ahead in lubricity improvement. For me, that is the best preventative measure I can take if I am going to keep the CP4. Obviously a DCR is best case, but the Cetane boost for XPD was also very good.
 
As temperatures start to drop around the US, figured it was time to bring the favorite topic of preferred lube back up.

Fixing to switch over to HS EDT+Winterization. I typically don’t let my tank get below 1/4 so I’m usually doing partial fill ups. I assume shouldn’t be any concerns of overdosing a half tank of diesel with regular EDT when I fill with a half tank of diesel and EDT+Winter Defense ounces according to the bottle ratio?
 
If I’m remembering correctly, Hot Shot’s claims they’ve tested to much higher concentrations without any ill effects. I remember looking into it when I accidentally OD’d the Extreme.

The suggested doses are just to the point of diminishing returns. 10oz does no more than 2oz type thing.
 
As temperatures start to drop around the US, figured it was time to bring the favorite topic of preferred lube back up.

Fixing to switch over to HS EDT+Winterization. I typically don’t let my tank get below 1/4 so I’m usually doing partial fill ups. I assume shouldn’t be any concerns of overdosing a half tank of diesel with regular EDT when I fill with a half tank of diesel and EDT+Winter Defense ounces according to the bottle ratio?
I have seen proof that you can add an entire 32 oz bottle to one tank. Not me, but a guy on another forum. He put 32 oz in 37 gallons of fuel. Came to the forum to ask why his truck was smoking 😂 Turned out what he was seeing was the water vapor that is sometimes present with diesel exhaust in really cold weather (like gassers often have). Truck ran fine. I think you'll be ok.
That reminds me that I need to up the dose on the off road diesel. It was purchased in September . Probably no antigel in there from the pump.
 
I mix Hot Shots LX4 with Powerservice white. Use this in both my 22 6.7 and 02 7.3. Prior to that I used this mixture in my 06 Ram 5.9, which I sold to my son. That Dodge now has more than 300K miles, and has never had any engine or injector problems.
 
4oz of Diesel Kleen every fill up (i never let my tank get below 1/4 and typically fuel at 1/2) since I've started owning diesels with my first 7.3l.... never a fuel issue.
 
I've been messing around with the two different fuel grades at Shell. V-Power and regular. So far my best mix has been with the Hot Shots EDT+winter and regular diesel. I tried HS and V-Power, no difference. I've tried Archoil 6500 when it was still warm out and the diesel filter seems to fill up pretty fast in comparison. Haven't tried the XPD yet but I will say I'm not going to fill up with the pricer fuel as it doesn't make any difference for me. I haven't settled on a regular treatment yet but so far, HS is my winner. Maybe XPD will be better..
 
I've been messing around with the two different fuel grades at Shell. V-Power and regular. So far my best mix has been with the Hot Shots EDT+winter and regular diesel. I tried HS and V-Power, no difference. I've tried Archoil 6500 when it was still warm out and the diesel filter seems to fill up pretty fast in comparison. Haven't tried the XPD yet but I will say I'm not going to fill up with the pricer fuel as it doesn't make any difference for me. I haven't settled on a regular treatment yet but so far, HS is my winner. Maybe XPD will be better..
In my mind, the "premium" diesel is like "Platinum" DEF. Good for one thing: getting money out of pockets.
 
In my mind, the "premium" diesel is like "Platinum" DEF. Good for one thing: getting money out of pockets.
I live in a remote mountain area and the local Chevron carries Premium diesel as their only diesel choice... it's more costly than than the few options available 20 minutes away. However, I'll say this, I can definitely tell the difference in my 02 7.3... it runs much quieter and smoother. The difference in my 22 Tremor isn't as noticeable but there's still a difference, and I use Hot Shots LX4 mixed with Powerservice white every tank in both trucks. But the most interesting part is all the local municipalities and logging companies use the Chevron, higher priced Premium. The logging drivers I've talked with while filling up say their company has identified noticeable less engine problems.
 
I live in a remote mountain area and the local Chevron carries Premium diesel as their only diesel choice... it's more costly than than the few options available 20 minutes away. However, I'll say this, I can definitely tell the difference in my 02 7.3... it runs much quieter and smoother. The difference in my 22 Tremor isn't as noticeable but there's still a difference, and I use Hot Shots LX4 mixed with Powerservice white every tank in both trucks. But the most interesting part is all the local municipalities and logging companies use the Chevron, higher priced Premium. The logging drivers I've talked with while filling up say their company has identified noticeable less engine problems.
I ran both for 5000 miles. Absolutely 0 difference in fuel economy or regen time/ frequency in my 2015. Same fuel additive in both.
If it works for them, that's great. And it may. I just can't see any change that justifies the dollar loss.
 
As temperatures start to drop around the US, figured it was time to bring the favorite topic of preferred lube back up.
I've ran Archoil 6500 7oz/full tank since I took delivery, and just did my first oil change service at ford on the 4th. I also have the DCR conversion so, no more CP4 since first month of ownership.

Was going to do motorcraft 5w40 full synthetic but... they ended up adding 0w40 full synthetic instead because, supposedly Ford isn't running the 5w40 anymore (doubtful). I caught it on the paper and they ended up discounting my service and next service will be free (keeping the 0w40) rather than swapping out if I was okay with that.

Anyone have thoughts on the above? I think I won in that deal mostly... though some may have a different opinion 🤔.

It has a wide winter range but, figured I'd share here if anyone has anything to say for/against.

Last I checked, my truck is at 8606mi and the service covered everything with "new truck clean bill of health" short of some battery losses for CCA 731/688 each side. Full MPVI and everything ford typically does plus rotation and spare inspection. All fluids topped off and tested too.

They also did a reset for my transmission to sort out harsh upshift for 3-4 so will be adapting for a couple weeks as it relearns - shifts so far are smoothed out.

Oil is always up for debate with people on what's best... I'm in western coastal canada and we don't go much below 0°C so I'm aware I'm not using the range this 0w40 is intended for. Thoughts?
 
Back
Top Bottom