Dodged a bullet?

Maybe, and I love the 6.7, but a 6.7 will never be as cool or sound as good as a supercharged 7.3 :cool:
1759934441239.gif



Moderators, ban this man at once!
 
Maybe, and I love the 6.7, but a 6.7 will never be as cool or sound as good as a supercharged 7.3 :cool:
You may want to ask the folks that ran the Sedona trip and get their opinion on an open, gutted, restriction free 6.7 with a turbocharger.

I may take @Optimus🤖 techonological courses and learn how to upload a 1950s era, 17-second clip of her working to get your ears to orgasm.

Not to say that the supercharger doesn't get my plooter all puckered up but don't sleep on the oil burner with 5 inches of open pipe from growling like a lion, while suctioning oxygen to spool the turbines.
 
O.P. reads only so much but misses the factoidials including:

1. Idle oil pressure too low due to software programming for it's "variable output" oil pump. (if you're going to build a world-class, durable V8 gasoline truck engine, why use any software for oil pressure? Answer: "Damn the torpedos! We want to meet CAFE standards!")

These engine idle oil pressure tuning issues are said to have been addressed as early as the '24 model year, but! wait! There's more:


2. Most of the engines experiencing lifter/cam lobe failure were work trucks that hit the job site only to idle 12 hours a day for 5 days a week, 50 weeks a year. A handful were regular citizen's trucks.


Then there are the many 7.3 Godzilla owners here on FT.C who remain running their 7.3s problem free. I hope to be one of them. This is a great engine otherwise.
 
O.P. reads only so much but misses the factoidials including:

1. Idle oil pressure too low due to software programming for it's "variable output" oil pump. (if you're going to build a world-class, durable V8 gasoline truck engine, why use any software for oil pressure? Answer: "Damn the torpedos! We want to meet CAFE standards!")

These engine idle oil pressure tuning issues are said to have been addressed as early as the '24 model year, but! wait! There's more:


2. Most of the engines experiencing lifter/cam lobe failure were work trucks that hit the job site only to idle 12 hours a day for 5 days a week, 50 weeks a year. A handful were regular citizen's trucks.


Then there are the many 7.3 Godzilla owners here on FT.C who remain running their 7.3s problem free. I hope to be one of them. This is a great engine otherwise.
Yeah, facts and all, but we're all out of our depth because said facts do not agree w what OP read online from Jimbob's YT channel.
 
Maybe, and I love the 6.7, but a 6.7 will never be as cool or sound as good as a supercharged 7.3 :cool:
This is the truth! I am one month in to diesel ownership and I seriously miss hearing how the 7.3 would sing when you got on it hard or the deep/low growl at medium throttle inputs up through the midrange. A lot of guys who make the switch from gas to diesel seem to feel obligated to shit on their old setup, and sure there's a lot that I like about my new truck, but there are days I seriously miss my old gasser.
 
This is the truth! I am one month in to diesel ownership and I seriously miss hearing how the 7.3 would sing when you got on it hard or the deep/low growl at medium throttle inputs up through the midrange. A lot of guys who make the switch from gas to diesel seem to feel obligated to shit on their old setup, and sure there's a lot that I like about my new truck, but there are days I seriously miss my old gasser.
Everyone is ignoring my post but that doesn’t mean it doesn’t turn heads when we’re cruising down the road.
 
At the risk of getting involved in this forever two camps argument ……….. the following will always be true:

If you need “TORQUE” (especially at the low end) to do the work these vehicles are designed to do, again at lower rpm (meaning longer engine life) the choice is clear! To put this longer engine life comment into perspective in round numbers if your gasser runs 500 rpm higher at 70 mph than the equivalent oil burner, do you realize that is 428,571 more engine revolutions in every 1,000 miles or 42,857,142 more per 100K miles! Go ahead please check my math!

At a $12,000 upcharge for an oil burner over a conservative 200,000 mile lifetime that is $0.06 per mile penalty to avoid an additional 85,714,284 engine revolutions! IMHO that’s a worthwhile expenditure given all the other accessories we are crazy enough to put on these trucks.
 
To no one in particular, lest you-know-who takes my post too seriously...

The 7.3 has one-half the torque output of the mighty 6.7 H.O. but that doesn't change the fact that the 445-inch gasoline V8 in these trucks is a tremendous engine.

Too, when uncorked (relatively speaking) with a decent exhaust system, the notes the 7.3 produces are utterly MELLIFLUOUS.

:LOL: 🏁
 
…
These engine idle oil pressure tuning issues are said to have been addressed as early as the '24 model year, but! wait! There's more:
…
As early as 2024… so we’re just ignoring 4 model years, millions of trucks were impacted, including MY22, in which I was wondering if I dodged a bullet?

You guys don’t understand. I was a rabid Godzilla fan, beyond thrilled that they made a motor like that. But they couldn’t help themselves and ruined it with their efficiency stupidity. GM did the same, just so very much worse. Regardless what you say I’m not convinced the motor is reliable.

CP4 and all its looking like the 6.7 is the best V8 in production for any mfg, gas or diesel.
 
ehhh Hell, I love my Whippled 7.3. It is truly a FUN truck to drive, Not knocking the 6.7 however Since the 7.3 came out I still have seen more 6.7's come in with issues. They are tools for a job, my commute is short 3 miles one way with 55 being the highest speed limit. I would kill a 6.7 with my commute alone, The lightness and nimble driving of the 7.3 is fun. I would not walk away from either one if given. But I can still replace a long block in a 7.3 and come out less than a fuel system failure on a 6.7. When and if that time comes that is what I will do. Now I believe most wear in a engine comes from start-up, so the argument that it is spinning more RPM over its life cycle is kind of a wash for me. The cylinder pressures on a 6.7 are way over what a 7.3 is, I would bet the fuel dilution on a 6.7 is higher as well.

Now back to our regularly scheduled the sky is falling entertainment.
 
Everyone is ignoring my post but that doesn’t mean it doesn’t turn heads when we’re cruising down the road.
I wasn't ignoring it, but until my company opts to send me to another location from where I am based currently (or I can find and make friends with a Smog guy I can trust), sound enhancing "weight loss" is off the table.
 
I ordered a 7.3 in ‘22 because it was a pushrod port injected motor that should’ve been bulletproof, best motor in decades… I waited 9 months and the truck was never built and the order pushed.

Then early ‘23 I changed my mind and changed the order to the 6.7 HO. Did I dodge a huge bullet or what? All I hear is that Godzillas are trash and won’t make it to 100k. Has anyone come up with a guaranteed way to fix the oil issues yet?
At the end of the day does the application you choose work for you? I went 7.3 due to not towing a ton and I really don't drive a bunch so the diesel didn't make sense. I talked to my bil who has nothing but diesel fleet/personal vehicles and he never had a cp4 issue (his maintenance schedule was aggressive). I'm at 66k on my 22 7.3 and baring one odd hiccup when I first got it it's been trouble free. I try to remember that social media/youtube negativity garners a toooon of views and discussion over a quick post/video of someone essentially saying '7.3 good, no issues'.
 
You may want to ask the folks that ran the Sedona trip and get their opinion on an open, gutted, restriction free 6.7 with a turbocharger.

I may take @Optimus🤖 techonological courses and learn how to upload a 1950s era, 17-second clip of her working to get your ears to orgasm.

Not to say that the supercharger doesn't get my plooter all puckered up but don't sleep on the oil burner with 5 inches of open pipe from growling like a lion, while suctioning oxygen to spool the turbines.
Just let me know! It wouldn't be the first time I've uploaded a 17 second video of her working it (I know, some days are really quick 🤪).

While I love the sound of any engine with any fuel, its the burnout that I enjoy the most. What you're about to see is the best burnout of all time!


Oh, this is gas by the way 🤪. Anyone have an orgasm!?
 
I wasn't ignoring it, but until my company opts to send me to another location from where I am based currently (or I can find and make friends with a Smog guy I can trust), sound enhancing "weight loss" is off the table.
Not knocking on you for not being able to throw your Scorpion into the weight loss program- the Kal Republic is no joke when it comes to bending the books, but you'd be stoked if you ever get the opportunity to hear her breathe and whistle, especially in person. On our Sedona run, I heard a few totaly stock 6.7s and brought back memories of what she sounded like when new - like a tamed horse. A lot has happened since and it just feels like a completely different engine, totally unleashed.

I would venture to say the Godzilla with a blower sounds very similar - how much pounds are you guys pushing with those chargers @ccradier? I've never heard one but I'm sure it would make me wet my trousers.

Today, I borrowed @Alpoba’s neighborhood and recorded some quick videos of me rolling down the street (keeping an eye out for any maintenance happening street-side—inside joke for those following all the work he’s put in this week). Now I’m trying to figure out how to upload them, even in small bursts, so you all can get a sense of what an open 6.7 sounds like, pushing 650 ponies. What doesn't help is the engine fan being on but I also don't want it off and cause my engine temps to get high.
 
Last edited:
I agree with @AZsurveyor the 6.7L is a real beast when you unleash it, but even more amazing is how quiet it is at idle and under normal acceleration.

Trust me I don’t do this very often but it’s so much fun pulling up at a red light, next to a much younger testosterone loaded driver in his prize ride who is showing off it’s acceleration potential when the light goes green only to have him looking at my license plate in short order. Then getting the deer in the headlights amazing once over acknowledgement of submission after I let him catch up!
 
I’m not trying to prove a point or start a fuss, I was just curious if someone knew about solutions to the cam lubrication failures. I have this recent video from Eric I’ll share.
Nice work, your google skills found one, aaa aa aahhhh. :ROFLMAO:
 
I agree with @AZsurveyor the 6.7L is a real beast when you unleash it, but even more amazing is how quiet it is at idle and under normal acceleration.

Trust me I don’t do this very often but it’s so much fun pulling up at a red light, next to a much younger testosterone loaded driver in his prize ride who is showing off it’s acceleration potential when the light goes green only to have him looking at my license plate in short order. Then getting the deer in the headlights amazing once over acknowledgement of submission after I let him catch up!
One of these you're gonna pull up to a Whippled Super Duty and regret it! Oh yes you will! 🤪
 
Back
Top Bottom