Anyone down with wheel poke?

lol 2 days ago I had some asshat pass me I was in my bucket truck at work guy almost side swiped the bucket was all over the road I have no idea what offset this guy had but it was ridiculous there honest to god had to be at least 10” or more of poke looked like a go cart goin down the road, personally I like no more than a 0 offset on a 9” wide and maybe -12 for a 10” wide
 
"Anyone down with wheel poke?"

Sure - maybe on some scrumptious, individual-runner injection on a Lexus V8 stuffed into a sweet old JDM coupe...

But on our trucks I prefer only a slightly enhanced track width from very conservative offsets (+18 or greater), 17 or 18" wheels not much wider than an 8.5 or 9" and taller tires with section widths not much greater than 11.5

I am a Certified Narrow Tire Nerd. :geek: Skinny tires do everything better off highway.

:love: 😝 🏁
 
I HATE when people judge other people's tastes, preferences, and use of their hard-earned money. To each their own. If you're an automotive enthusiast dumping money into your rig to make it your own, I'm behind it, even if i don't agree with it.
As a general rule, I agree with you. I see people do all kinds of things I’d never do — like installing a so-called “angry grill” on a jeep, wearing a spiked pink mohawk, or having a donkey’s ass tattooed on your cheek. What folks do with their money, vehicles, or body is none of my business, unless their idiotic choices put me, others, or our property at risk. There’s a reason it’s a violation to have tires sticking out 6” beyond fender/flap coverage, and it’s not because it looks stupid (although it does). ;)
 
I am a Certified Narrow Tire Nerd. :geek: Skinny tires do everything better off highway.

:love: 😝 🏁
I’m a skinny tire fan for some jobs too, but I think wider tires are better on soft beach “sugar-sand”, and they can also be run with higher tire pressures, which reduce the risk of rolling a tire off the rim. :cool:
 
I’m a skinny tire fan for some jobs too, but I think wider tires are better on soft beach “sugar-sand”, and they can also be run with higher tire pressures, which reduce the risk of rolling a tire off the rim. :cool:
As a narrow tire nerd myself i agree. Wide tires rule on sand.
 
38x13.50R17 Falken R/T01s at 15psi in the sand are 👌🏼😍

I was up in the woods with my boys a few years back and there was probably 4-6” of refrozen snow on the road. The 315/70R17 Ridge Grapplers on my F-150 at my normal street pressure of 25/28psi did awesome on the way up the hill. Very little wheel spin unless I was intentionally drifting. Some bro in a Chevy on “wides” with about 3” of sidewall drove by and he was STRUGGLING to make it up what was only about a 2% grade. Told my boys we weren’t pulling him out when he got stuck 😂

Whether you prefer narrow or wide, SIDEWALL is king 😎
 
My issue is that generally the drivers of rigs with ridiculous offset wheels roll coal and drive like jerks. I also see them sitting on the side of the road missing a wheel because a ball joint ripped itself apart. So maybe it all sorts itself out eventually.
 
Wheel widths and tire widths are one thing and offset is another.

If I were driving a 6" lift I'd want to maintain my truck's "stability triangle" (forklift talk) by widening it's axle track width, so zero offset into minus/negative offset territory, there.

The +/- aspect of mm offsets corn-fewzlt me for ages. Positive offset puts the wheel's barrel width inboard whereas postive offset pulls the wheel barrel's width farther out

I mention this stuff here in case anyone like me may have some minor trouble w/ the +/- logic, hahaha... so here's a dang picture.

wheel-offset.webp
 
I reiterate my personal preference to run on my truck a 37 X 11.5" wide tire...

While showing you this photo of new member @Jack. brand new, bone stock Tremor w/ 37 X 12.5 X 17 Toyo A/TIII wrapped around Nomad Convoy wheels 17x8.5" +10 offset as an illustration of a 12.5" width I would run if someone held a pistol to my head. 😝

I like it!

img_8256-webp.262573
 
This is a 18x9 -12 with 37's. Just enough poke to fill the wheel wells without looking janky.

Previously it had 18x9 +18 and thought it had too broad of shoulders with skinny legs :LOL:
 

Attachments

  • IMG_5077.webp
    IMG_5077.webp
    223.7 KB · Views: 13
  • IMG_6722.webp
    IMG_6722.webp
    426.3 KB · Views: 15
  • Like
Reactions: McE
had 18x9 +18 and thought it had too broad of shoulders with skinny legs


O rly


18 X 8, +40mm wrapped in a 38 X 11.5 X 18, baby! Yeeeah.

[not my truck, tho]

Toyo RT Pro 38 X 11.5 X 18 - 5 - Crumm Alaska.webp

Photo courtesy Crumm on ford-truck.com/FTE
 
^ ^ ^ I like 'em tall and skinny, I do, but that is a bold move. :ROFLMAO:
 
Back
Top Bottom