Anyone down with wheel poke?

IMO if you don’t use truck as truck there are other vehicles I would rather be driving around in for 90k. If I didn’t need a truck I would rolling in a GLE AMG 53 all day for same money.
Don’t get me wrong I love HD trucks I’ve owned 8 of them. My first was brand new 1999 Ford f-250 extended cab long bed 7.3 diesel, wish I still had that one.

Ok, your first post was a little more convoluted, this post is more to the point...I guess. You see a truck solely as a tool to serve a need, and buying one as a toy or to use in anyway other way than as a tool doesn't make sense. So that would not only include poked out show trucks but also any truck that isn't being used to haul or tow regularly. I don't "need" an HD truck, got by for many years with just a Tacoma. The Super Duty was purely a want. I have had some type of truck in rotation for almost as long as I've been driving.

For as long as I can remember people have been modifying trucks. In high school it was lowered trucks, or giant lifted trucks with multiple shocks basically worthless anywhere but a mud pit. Even manufactures have made trucks that aren't the best at truck stuff but either have an aesthetic or performance appeal. Anyway, I really don't see choosing a truck to modify being any different than someone modifying a car, so I don't think of them any differently when seeing them on the road. My reaction is the same seeing some winged out Civic, or some poked out SD, "that's f'n ugly".
 
IMO if you don’t use truck as truck there are other vehicles I would rather be driving around in for 90k. If I didn’t need a truck I would rolling in a GLE AMG 53 all day for same money.
Don’t get me wrong I love HD trucks I’ve owned 8 of them. My first was brand new 1999 Ford f-250 extended cab long bed 7.3 diesel, wish I still had that one.
My Second new HD truck was also a 99 F250, 7.3 with manual shift. I loved that truck and would still have it if I had the room to park it. I sold it, people came to me with offers. So, I took one. :( (Prior to that I had an 87, was also still running OK when I traded it in for the 99.)
 
Ok, your first post was a little more convoluted, this post is more to the point...I guess. You see a truck solely as a tool to serve a need, and buying one as a toy or to use in anyway other way than as a tool doesn't make sense. So that would not only include poked out show trucks but also any truck that isn't being used to haul or tow regularly. I don't "need" an HD truck, got by for many years with just a Tacoma. The Super Duty was purely a want. I have had some type of truck in rotation for almost as long as I've been driving.

For as long as I can remember people have been modifying trucks. In high school it was lowered trucks, or giant lifted trucks with multiple shocks basically worthless anywhere but a mud pit. Even manufactures have made trucks that aren't the best at truck stuff but either have an aesthetic or performance appeal. Anyway, I really don't see choosing a truck to modify being any different than someone modifying a car, so I don't think of them any differently when seeing them on the road. My reaction is the same seeing some winged out Civic, or some poked out SD, "that's f'n ugly".
😂
The only thing convoluted is your interpretation of my post. I’ve modified every vehicle I’ve ever owned. My point on the poke is when your going to the extreme of 22/24in wheel with 12/14 wide with negative 44 to 80 or whatever they max out on offset it takes away from what the truck can do. You’re making it actually perform at a lower level for the look. All my vehicles look cool to me after modifications but still can perform as they were designed or close to. I actually don’t mind the look of there trucks just question going to that extreme unless it was just a show truck done the right way. You know they got to ride like shit so it couldn’t be fun to drive as a daily. You definitely couldn’t take a phone call because your teeth would be chattering 😂
The gentleman I was speaking with noted to clear his wheels the right way requires full suspension lift 4-6in with aftermarket bumper. Total investment +10k.
But what you see on the road is usually a spacer level kit with cutting wheel wells and bumpers to get them to clear. So when I see a pavement princess done in this fashion it makes me question why. As stated before I wouldn’t have a HD as a princess because I think there are better options but that’s just me and maybe my age. Not saying people can’t or shouldn’t do it. I’m sure I would of felt differently about this 20 years ago lol

Coming from a Tacoma you must understand this better than I as you had a vehicle that looked like a truck but didn’t function as one 😜 JK
 
I'm not a fan of more than the tiniest bit of poke but to each their own. FWIW I think the vast majority of folks here on this site who have changed wheels and tires have done so very tastefully with aesthetic improvements as well as equal or improved functionality.

While the stock wheels and tires on mt '23 look a little skimpy to me, I'm beginning to take a slightly perverse, almost atavistic pleasure in leaving it that way. Probably just me, but when I look at it from certain angles I see the faintest echoes of the old Highboys.
 
When I was in high school I had an 03 ford 6.0 hand me down from my dad and it had 250k miles. I got a summer construction job and saved up for a BDS 4” lift kit, 325/60r20 tires and a road armor front bumper. Emission delete. Head studs and tuned to 400 whp. I loved that truck
I had 20x10 wheels with -12mm offset and I drove around always regretting that I didn’t get a 12 wide wheel with -44 offset because I saw that online and really thought I loved the look. Now that I’m a grown up 27 year old… lol I look back and I’m happy I didn’t do that. My -18 offset is perfect for me and there isn’t a day I wake up wishing for more than this

I do however wake up every day wishing I hadn’t sold this truck…
IMG_1764.webp



Current poke that I am happy with
IMG_1746.webp
 
When I was in high school I had an 03 ford 6.0 hand me down from my dad and it had 250k miles. I got a summer construction job and saved up for a BDS 4” lift kit, 325/60r20 tires and a road armor front bumper. Emission delete. Head studs and tuned to 400 whp. I loved that truck
I had 20x10 wheels with -12mm offset and I drove around always regretting that I didn’t get a 12 wide wheel with -44 offset because I saw that online and really thought I loved the look. Now that I’m a grown up 27 year old… lol I look back and I’m happy I didn’t do that. My -18 offset is perfect for me and there isn’t a day I wake up wishing for more than this

I do however wake up every day wishing I hadn’t sold this truck…
View attachment 148925


Current poke that I am happy with
View attachment 148926
Looks great, both of them! If I was wanting a very aggressive stance I think my max would be 10 wide -25.
 
Last edited:
Looks great, both of them! If I was wanting a very aggressive stance I think my max would be 10 wide -25.
I almost went -25 on the wheels for my 23.. I’m actually happy that I didn’t.
 
I'd like to thank all you that run with your tires exposed. Ya know, I love my cars and trucks as much if not more than you do yours. Replacing my cracked windshields and repairing paint chips isn't cheap. Your arrogance doesn't go unnoticed ..
 
Hmmmm...
Seems they would be more apt to fail prematurely than not.

Wheels with offset can indeed impact the health of your vehicle’s bearings. Let’s delve into the details:

  1. Scrub Radius:
    • The scrub radius is the distance from the center of the tire contact patch to the point where the kingpin axis intersects the ground.
    • If the kingpin axis intersects the ground inboard of the center of the tire contact patch, the scrub radius is positive.
    • Conversely, if the kingpin axis intersects the ground outboard of the center of the tire contact patch, the scrub radius is negative.
    • Negative scrub radius is often achieved by pushing the kingpin axis as far outboard as possible, minimizing the kingpin offset.
  2. Kingpin Offset:
    • The kingpin offset is the distance between the center of the wheel/tire assembly and the kingpin axis.
    • Normal kingpin offset values range from about 50 mm to 100 mm.
    • A smaller kingpin offset is desirable because it reduces the scrub radius and minimizes the lever arm for forces acting on the suspension.
  3. Effects on Bearings:
    • Increasing the offset of the wheel places more stress on the axle’s studs.
    • In front axle applications, this stress affects the unit bearings (or spindles) and ball joints of the axle.
    • The additional forces due to offset can lead to premature wear and damage to these components.
    • Wheel spacers, which are sometimes used to widen the stance, can exacerbate this effect.
  4. Handling and Safety Considerations:
    • Altering the offset also affects the tire scrub radius, which impacts how the vehicle handles.
    • Increased tire scrub radius changes the way the vehicle responds to road impacts, braking forces, and acceleration.
    • It can make slow-speed turning more challenging.
    • Properly engineered offset ensures optimal handling and safety.
In summary, while offset wheels can enhance aesthetics and stance, it’s crucial to consider their impact on suspension geometry and bearing health. Always consult with experts and follow manufacturer guidelines to maintain safety and performance.

Nice way to start a fishing tournament the night before launch, right?View attachment 148894

View attachment 148893
So they failed with no offset at all.. crazy! Take care of bearings and buy quality components and they seem to last.
I’ve had them with 200k on offset rims.
I’ve had them with 40” tires on heavy rims and never replaced a unit bearing.
I have them on 38” tires with 94” track width on a rig that doesn’t see pavement just rocks and never replaced a unit bearing.
 
I'd like to thank all you that run with your tires exposed. Ya know, I love my cars and trucks as much if not more than you do yours. Replacing my cracked windshields and repairing paint chips isn't cheap. Your arrogance doesn't go unnoticed ..
Except those big meaty tires aren’t holding rocks like small tight tread tires.
And you rarely see a rock fling through the air, they bounce off the ground off cars that are protected.
 
When I was in high school I had an 03 ford 6.0 hand me down from my dad and it had 250k miles. I got a summer construction job and saved up for a BDS 4” lift kit, 325/60r20 tires and a road armor front bumper. Emission delete. Head studs and tuned to 400 whp. I loved that truck
I had 20x10 wheels with -12mm offset and I drove around always regretting that I didn’t get a 12 wide wheel with -44 offset because I saw that online and really thought I loved the look. Now that I’m a grown up 27 year old… lol I look back and I’m happy I didn’t do that. My -18 offset is perfect for me and there isn’t a day I wake up wishing for more than this

I do however wake up every day wishing I hadn’t sold this truck…
View attachment 148925


Current poke that I am happy with
View attachment 148926
Full specs on wheels?
 
No poke for me, but I am waiting for this trend to make it to the HS truck world!View attachment 148974

🤣, that is a perfect example of one of the many automotive trends that is purely for looks. I believe they call that "stanced". Just like a poked out truck, not my thing, but not my money either. Gonna have to be IFS/IRS trucks to make that happen.
 
I have about 2 - 3 inches of poke on my current ride. I live in Canada where they put lots of salt and gravel on the roads in the winter. I love the look of a bit of poke, but when my new ride arrives, I will try and stay even with my fenders and or fender flares especially during the winter. During the winter huge amounts of overspray and rocks would by pass my mudflaps and within a few years, I had rock chips on the sides of my truck all over the place. I think another option for those in winter states/provinces is run the stock tremor rims in the winter so they are inside the fenders, but switch out to a nicer wheel/tire setup even with your fender flares. One more thing to add, I went through front wheel bearings more frequently with such an aggressive poke. I plan on running a 20"x9" wheel with a 18+ offset combined with the Toyo AT3 295s with 4080 load for summer months.
I always make the joke about hating your paint when having poke, but I live in an area with a lot of crummy gravel roads. I in my experience having any poke destroys the paint in a short order when going beyond the fenders/flares. Personally don’t mind a little poke cosmetically wise but learned long ago that is not for me due to where I travel and all the crud it throws down the sides no matter time of year.
 
I'd like to thank all you that run with your tires exposed. Ya know, I love my cars and trucks as much if not more than you do yours. Replacing my cracked windshields and repairing paint chips isn't cheap. Your arrogance doesn't go unnoticed ..


Back when I worked the street I cited my fair share of vehicles with wheels extended way outside of the body lines without any mud flaps. CA Veh Code requires mud flaps on anything outside of 2”.
First it was the low riders, then the mid 80’s saw the thrashers with the slammed mini trucks, then the 90’s when the tuners hit the streets with cut/torched “lowered” suspensions and extra wide wheels on bicycle tires (as we called them) we towed them under the unsafe modified vehicle VC section. Before they could get their vehicles back they had to correct the issues and have them inspected and signed off by the CHP. Not a cheap undertaking!
My worst example was a Ramcharger that was lifted about 20” between suspension and body lifts and equipped with the rims and bike tires that extended about 12-14” out with the tires rated at less than 600lbs capacity each! On top of all that, his headlights were still in the stock location and were way too high for legal, so all together, it qualified to be towed and impounded. I remember getting a notice from the tow yard stating that the guy forfeited it in lieu of the towing and storage fees that he had incurred before giving up on trying to return it to legal status.
Sadly, this was prior to cell phones with cameras, otherwise I could have filled up ten memory cards full of those vehicles back then that we either towed and or cited for their violations.
 
About the only time in my life I liked a little tire poke was in high school in the 80s when we were building out late 60s muscle cars and couldn't fit wider tires completely under the fender ('til we started with tubbing and narrowed rear ends). But personally, tire poke on pickups never grew on me. I guess I had too much gravel road driving and winter driving with the side effects of tire poke (snow/salt or gravel/rocks up the side of the vehicle) and that left a bad taste in my mouth.

Now that I'm into overlanding, the same holds true for those reason and more. Love the tall skinny look (pizza cutters) on everything from ATV, UTV, and offroading SUV and pickups. A lot of that has to do with the terrain we frequent. Little to no mud nor sand so no advantage to floatation. Though, if you look at the science of floatation in sand, going taller to increase contact patch is more beneficial than wider to increase contact patch because you are pushing less sand in front of a narrower tire than a wider tire. Also, when airing down, the benefit of elongating the contact patch is more than widening it, but I digress on both subjects). In the rocky mountains here in Montana and other States, and in all the places we frequent in Utah, I value increased height to get more clearance, but not width. Dry/rocky terrain there is no advantage to a wider tire. Just the opposite. Have wished I was narrower when trying to pass close to a rock or pick a line.

I went with stock 18" Tremor wheels on my non-Tremor (they don't make a Supercab in Tremor, so hand was forced). Tires I went with LT285/75R18 in my favorite tire brand/model. I did not want 35 x 12.5". Too much poke for my eye, my use, and plus they were 9 lbs heavier per tire. Hoping the tall/narrow choices continue to grow and we see some expanded 36" tires but staying narrow. My dream tire is a LT285/80R18 (36" x 11.2") or LT285/85R18 (37.1" x 11.2") because for my use, increased height brings only increased advantages (better rollover, increased clearance, more sidewall and height allows lower air pressure when airing down, etc.). Increaased width only brings disadvantages for my use; Heavier so more wear and tear and worse mileage and heavier when I change wheels/tires seasonally or rotating. Also increased width and poke increased snow, dirt, rocks on side of truck and shoots all of the same at other drivers and when it comes down to it, I don't like the look, but that is a result of my personal use case as I'm a function over form type of modder.
 
About the only time in my life I liked a little tire poke was in high school in the 80s when we were building out late 60s muscle cars and couldn't fit wider tires completely under the fender ('til we started with tubbing and narrowed rear ends). But personally, tire poke on pickups never grew on me. I guess I had too much gravel road driving and winter driving with the side effects of tire poke (snow/salt or gravel/rocks up the side of the vehicle) and that left a bad taste in my mouth.

Now that I'm into overlanding, the same holds true for those reason and more. Love the tall skinny look (pizza cutters) on everything from ATV, UTV, and offroading SUV and pickups. A lot of that has to do with the terrain we frequent. Little to no mud nor sand so no advantage to floatation. Though, if you look at the science of floatation in sand, going taller to increase contact patch is more beneficial than wider to increase contact patch because you are pushing less sand in front of a narrower tire than a wider tire. Also, when airing down, the benefit of elongating the contact patch is more than widening it, but I digress on both subjects). In the rocky mountains here in Montana and other States, and in all the places we frequent in Utah, I value increased height to get more clearance, but not width. Dry/rocky terrain there is no advantage to a wider tire. Just the opposite. Have wished I was narrower when trying to pass close to a rock or pick a line.

I went with stock 18" Tremor wheels on my non-Tremor (they don't make a Supercab in Tremor, so hand was forced). Tires I went with LT285/75R18 in my favorite tire brand/model. I did not want 35 x 12.5". Too much poke for my eye, my use, and plus they were 9 lbs heavier per tire. Hoping the tall/narrow choices continue to grow and we see some expanded 36" tires but staying narrow. My dream tire is a LT285/80R18 (36" x 11.2") or LT285/85R18 (37.1" x 11.2") because for my use, increased height brings only increased advantages (better rollover, increased clearance, more sidewall and height allows lower air pressure when airing down, etc.). Increaased width only brings disadvantages for my use; Heavier so more wear and tear and worse mileage and heavier when I change wheels/tires seasonally or rotating. Also increased width and poke increased snow, dirt, rocks on side of truck and shoots all of the same at other drivers and when it comes down to it, I don't like the look, but that is a result of my personal use case as I'm a function over form type of modder.
Completely 100% Agree with your comments. Probably the best synopsis on tires for off-road use regarding size (narrow vs wide) and air pressure. I live off grid in a remote scenic area near the Colorado and Wyoming state line. Your statements are "spot on" in reference to the optimal practical tire(s) in the Rocky Mountain states.

This time of year is known as "Mud Season". We got 8 to 9 inches of snow on March 12th - 13th...slow snow for about 24 hours. On March 14th, High Pressure weather system.....sun out bright and melting snow, resulting in muddy conditions at lower elevations now, but those conditions will gradually go up on elevation where we live over the next 30 to 45 days.

Agree with not wanting a 35 x 12.50R - 18. I don't even want a 37 x 12.50R - 18. I too would like to see tire manufacturer's produce the sizes you posted. However, not sure those tire sizes (narrow) can be made with nice tread block and tread void. The only tire I have found that is remotely close is the Nitto Ridge Grappler - 37 x 11.50R - 18, but unfortunately this tire is Load Range D.

What is your favorite tire brand and type?

 
Completely 100% Agree with your comments. Probably the best synopsis on tires for off-road use regarding size (narrow vs wide) and air pressure. I live off grid in a remote scenic area near the Colorado and Wyoming state line. Your statements are "spot on" in reference to the optimal practical tire(s) in the Rocky Mountain states.

This time of year is known as "Mud Season". We got 8 to 9 inches of snow on March 12th - 13th...slow snow for about 24 hours. On March 14th, High Pressure weather system.....sun out bright and melting snow, resulting in muddy conditions at lower elevations now, but those conditions will gradually go up on elevation where we live over the next 30 to 45 days.

Agree with not wanting a 35 x 12.50R - 18. I don't even want a 37 x 12.50R - 18. I too would like to see tire manufacturer's produce the sizes you posted. However, not sure those tire sizes (narrow) can be made with nice tread block and tread void. The only tire I have found that is remotely close is the Nitto Ridge Grappler - 37 x 11.50R - 18, but unfortunately this tire is Load Range D.

What is your favorite tire brand and type?


I went with Cooper Discoverer AT3 XLT. Not aggressive enough tread for many owners, but this tire served me so well on my previous camper rig I couldn't bring myself to try an unknown, though I'm sure many of the more aggressive All Terrains would also be a great choice. Particularly if one was going to run the tire year round and not swap to dedicated winter tires (Blizzak LT) like I do since the Coopers are not snowflake rated...and you can tell. For our use, this tire pattern is plenty aggressive (deep and wide enough voids) for our mostly dry use and did quite well when a summer storm turned one mountain trip into slick clay. Performance on high speed gravel road and washboard roads is great and highway driving is extremely quiet. My philosophy is go aggressive as I need on the tread but no more. The Discoverer AT3 XLT fell perfect on the range of tread designs for our use and the terrain we frequent.

I was aware of the 37x11.5 Ridge Grappler and saw some builds using them. They look and fit great. If I end up putting on a lift, it will be a contender simply because no one else makes a tire that tall and narrow. But would be great to see more choices for all terrains in that 36" and 37" size while staying 11.5" or narrower on width. Market will be smaller for those so I understand manufacturers reluctance, but now that more pickups are coming from factory with lift and can fit narrow 37" on those factory lifts, perhaps a few more tire manufacturers will join the party.
 
Back
Top Bottom