Aftermarket Wheels & Tire size/offset photos

FYI, I am at +20 on my wheels and that is just about flush.

IMG_4010.PNG
 
I finally made the decision to have my lighted Husky Flares painted Darkened Bronze on my 24 KR and bought 18x9 1mm offset Double Dark Tinted Blitz and really like the result. Used my stock Duratracs for now and will replace when worn with 35x12.5x18 then.
 

Attachments

  • Side.webp
    Side.webp
    37.8 KB · Views: 103
  • Side2.webp
    Side2.webp
    55.8 KB · Views: 103
  • Side5.webp
    Side5.webp
    37.5 KB · Views: 94
  • Side4.webp
    Side4.webp
    31.3 KB · Views: 93
  • Side3.webp
    Side3.webp
    49 KB · Views: 96
  • Side6.webp
    Side6.webp
    39.7 KB · Views: 91
  • Back.webp
    Back.webp
    50.9 KB · Views: 77
  • DarkSide.webp
    DarkSide.webp
    42.8 KB · Views: 91
Very nice. Definitely like the Darkened Bronze on the flare. Puts points into that colour for when I eventually toss them on my truck.
 
Those do look good.. Of course they don’t offer rapid red 😡 Maybe I’ll grab the flat black and get them painted at a local shop.. Don’t need them currently, but would be nice if I ever change wheels!
That's what I did.
 

Attachments

  • 20251122_130525.webp
    20251122_130525.webp
    492 KB · Views: 107
I finally made the decision to have my lighted Husky Flares painted Darkened Bronze on my 24 KR and bought 18x9 1mm offset Double Dark Tinted Blitz and really like the result. Used my stock Duratracs for now and will replace when worn with 35x12.5x18 then.
Seeing this really makes me want to 2 tone my STX, my gf honda crv trail is a beautiful shade of green called ash green metallic. I think this on top and bottom would so good.
 

Attachments

  • a00d80a30045797755d2ca3cdbff0acf.webp
    a00d80a30045797755d2ca3cdbff0acf.webp
    114.4 KB · Views: 35
I finally made the decision to have my lighted Husky Flares painted Darkened Bronze on my 24 KR and bought 18x9 1mm offset Double Dark Tinted Blitz and really like the result. Used my stock Duratracs for now and will replace when worn with 35x12.5x18 then.
I have the same truck but star white two tone. At times I wish I would have got the black truck especially when seeing photos like your truck. Good looking truck!!
 
Finally got around to getting my Method 707 wheels put on the truck. Waiting for the 5th scratch and dent to get repaired and need to source a spare 37” tire to see if I can make it fit in the spare location. If not, I’ll throw it on the stock spare. I’m really pleased with the look of the wheel and tire combo.
View attachment 223415
@ShockGobble tell me about that center cap on the front wheels, I've never seen that before.
 
@ShockGobble tell me about that center cap on the front wheels, I've never seen that before.
It was the normal center cap that came with the Method Wheels but it covered the hub locking mechanism so I took a dremel to it to open it up. You can also buy them open from Method but I figured this was easiest/cheapest.

edit: I'll also mention my thought process behind it was if I was buried in the mud and lost vacuum then I could easily reach my hand and turn the actuator to lock the hubs without messing with an allen wrench or cap. Eventually I'll buy the shorter ones or just paint the hubs black to match.
 
Last edited:
The Fuel wheels I have you can use an Allen wrench and take off the very end cap. Yet, I haven't and likely won't.
 
Going from a 21 Lariat Tremor to a 26 Platinum Tremor. Currently run 37x12.5x18 Falken RT/01 tires. Method HDs in 18x9 +18 with full Factory suspension. Never had any issues rubbing.

My Question is: going to the 2026 will I have any issues with the same setup? I am currently not interested in an additional lift kit. Also debating on going 17s or 20s so I can have choices on the 3 peak rated tires here in the CO winters. I would keep that same 9" wide rim with the +18 offset.
 
@MNTC Mine rubbed slightly on the factory flaps with BFG HD terrains on a +18 setup. Otherwise no issues.
 
YA, 37s would be nice, for sure. 35s is it, which always surprises me.
Apparently there's a new XD tire coming that'ssupposed to be available in 37. Not sure when that drops and if it will be more MT or RT style.. I'm not familiar with anything Yoko does, so just play the waiting game.
 
Method MR703 bead grip 17x8.5” 0 offset 4.8” backspacing

Toyo open country RT Pro 37X12.5R17/10 128Q

Balanced with beads, no stick on or clamp weights.

Suspension is stock. Just a hellwig swaybar to handle the pickup camper.

Tires rub slightly on the backside of the front fender but I use the mudflaps as a wear item. Eventually they might wear through but it keeps the tire from grabbing the fender trim or anything else.

I love 17” wheels with massive tires. I have them on everything I own :cool:

IMG_5589.webp
 

Attachments

  • IMG_5596.webp
    IMG_5596.webp
    397.2 KB · Views: 144
  • IMG_5595.webp
    IMG_5595.webp
    648.3 KB · Views: 153
  • IMG_5594.webp
    IMG_5594.webp
    584 KB · Views: 150
  • IMG_5592.webp
    IMG_5592.webp
    427.3 KB · Views: 118
  • IMG_5591.webp
    IMG_5591.webp
    532.6 KB · Views: 116
  • IMG_5590.webp
    IMG_5590.webp
    670.3 KB · Views: 127
  • IMG_5597.webp
    IMG_5597.webp
    325.9 KB · Views: 125
Last edited:
Back
Top Bottom