Adding lighted platinum sill plates

I
You can always trim the mat a little just to uncover the lighted lettering, probably what I’ll do
i didn’t think of that. It could be an option, but you would have to crop it on both sides. Might look OK if you do it with care.
 
I

i didn’t think of that. It could be an option, but you would have to crop it on both sides. Might look OK if you do it with care.
For sure, I’ll probably end up spending way to much time trying to make it perfect lol
 
Could someone post either a link or the part numbers for the illuminated king ranch version?
 
Could someone post either a link or the part numbers for the illuminated king ranch version?
I think this was only a factory part for platinum trucks but you can get aftermarket ones that you can customize. Come to think of it I’ve never seen them for the limited trucks either but I would be surprised if they didn’t make them at some point.
 
Last edited:
I think this was only a factory part for platinum trucks but you can get aftermarket ones that you can customize. Come to think of it I’ve never seen them for the limited trucks either but I would be surprised if they didn’t Make them at some point.
Thanks. For some reason I thought I remembered seeing some a couple years ago that had it in king ranch. I guess I was mistaken.
 
such a bummer. I didn’t get power boards. Now I gotta hack into my wires and make it all white trashy…what a drag.
 
Soooo, anybody have the plug there with a Lariat that doesn’t have power steps?
 
Soooo, anybody have the plug there with a Lariat that doesn’t have power steps?
Nope, no plug for me. '22 Lariat with no OEM power boards.

Not a big deal since there's no lit up Lariat sill plate and nothing available for the rear doors anyways. I'd want the entire truck to match so it doesn't look like an after thought.
 
Same here took delivery September 2022 without power boards and no plug.
 
Anyone know the name of the plug? If I'm going to tap into it, I'd like to at least have it plug in and look factory.
 
Anyone know the name of the plug? If I'm going to tap into it, I'd like to at least have it plug in and look factory.
Motorcraft WPT984 or 3U2Z14S411BXAB
 
Well today I checked my 22 Tremor Lariat which was built in May of 2022. I have the standard Tremor running boards/nerf bars, no OEM power boards and I do not have the plugs either. 😩
 
Last edited:
Found these plugs on Amazon that fit also.

DigiAutoPart Fuel Injector Connector wiring harnesses 1U2Z14S411BPA​

These smaller taps also worked great and didn't take up much room.

Low Voltage Wire Connector, BRILLIANCE4U Quick Wire Splice Connector, 3 Way T Tap Solderless Wire Connectors, Ideal for LED Lighting, and Automotive, Fit 24-18 AWG Wires, Half Transparent 12 Pack​

 
Last edited:
Question: do the Platinum sill plates have Platinum or Super Duty on them
 
Want to add I wired mine in this week. You will need to tap into the larger diameter white wire for positive. There are other smaller diameter white wires in the harness. The black with white stripe are your ground.
 
My lariat has gotten a bit of platinum flavor today
99F5BBB2-285B-4FF1-BCB7-B08ECF223E19.webp
A6FD0787-C812-496A-8868-5DED9E471963.webp
 
Back
Top Bottom