22 Black Bear 🐻 Build

ARB Install

I decided to install my ARB twin CKMTA12…
Alright, here’s a preview of my ARB Pressure Control install to go with the compressor.

Hopefully I’ll get a video together at some point but wanted to get some photos posted in case they are helpful to anyone.

I installed the pressure control module above the spare tire. There was already a nice hole to use to bolt on a small plastic box with a washer. The plastic box keeps the pressure control dry and in place. Since my air tank is in front of the spare tire, it made the connections relatively easy. I also got power by tapping into the signal wire from the upfitter switch to the compressor. (That way it’s only on when the compressor is also on.) The electrical connections for both power and ground are routed through some fused blue sea terminals you see mounted on my bumper. I’m still trying to decide if I should squirt silicon around these or leave them as-is.

532D4277-5862-4117-894F-652C970CC646.png
9B682813-0E12-4E13-AC1F-3E09E6266667.jpeg
B1A0C31E-ED22-420D-A964-354D47E6243E.jpeg
16E4544A-81A3-4E7E-AC9D-81BC7887352B.jpeg


1F66823C-10E2-4F70-AE3A-75D578B3C458.jpeg
 
Last edited:
Alright, here’s a preview of my ARB Pressure Control install to go with the compressor.

Hopefully I’ll get a video together at some point but wanted to get some photos posted in case they are helpful to anyone.

I installed the pressure control module above the spare tire. There was already a nice hole to use to bolt on a small plastic box with a washer. The plastic box keeps the pressure control dry and in place. Since my air tank is in front of the spare tire, it made the connections relatively easy. I also got power by tapping into the signal wire from the upfitter switch to the compressor. (That way it’s only on when the compressor is also on.) The electrical connections for both power and ground are routed through some fused blue sea terminals you see mounted on my bumper. I’m still trying to decide if I should squirt silicon around these or leave them as-is.

View attachment 62085View attachment 62087View attachment 62088View attachment 62090

View attachment 62091
Awesome!! Are you keeping your compressor in the bed or are you going to move it above the spare tire?
 
Awesome!! Are you keeping your compressor in the bed or are you going to move it above the spare tire?
Keeping it in the bed. It’s out of the way and safe from the elements.
 
Did you try adding rubber sound damping material under your compressor? Curious if if reduces the sound from the vibration on the builtright panel?
Frankly, it’s a bit tedious to bolt the ARB to the rack and the rack to the truck. So I’m just leaving it as-is for now. Would have been a nice idea from the beginning though. 👍
 
Keeping it in the bed. It’s out of the way and safe from the elements.
Ok and am I correct to assume your pressure control kit is connected between your compressor and your tank?
 
Ok and am I correct to assume your pressure control kit is connected between your compressor and your tank?
No. The compressor has an air line straight to the tank. Then the tank has an air line to the pressure control. And then the pressure control has an air line to the quick disconnect on the bumper.
 
No. The compressor has an air line straight to the tank. Then the tank has an air line to the pressure control. And then the pressure control has an air line to the quick disconnect on the bumper.
Curious to hear your opinions on operation once you have used it...
 
Curious to hear your opinions on operation once you have used it...
It felt pretty quick to take the rear truck tires from 60 to 80. I was quite pleased. But the 3 gallon tank helps a lot with that. Overall, it’s so much better than using a pancake compressor that’s heavy and takes up bed space. I also used the ARB on my trailer tires. Super fast there bc the tires are smaller.

Wait, just realized you were asking about the pressure control. The app takes a few minutes to figure out. It’s not hard but you have a handful of options. Controlled pressure, full pressure, no pressure, etc. since I have normally open (NO) air connectors on my hose, I have to set the pressure control to off, connect my lines, then set the target pressure. After a couple tries I got the hang of it. Super convenient. I think it was totally worth the money. But I’m a gadget guy. 😆
 
just realized you were asking about the pressure control. The app takes a few minutes to figure out. It’s not hard but you have a handful of options. Controlled pressure, full pressure, no pressure, etc. since I have normally open (NO) air connectors on my hose, I have to set the pressure control to off, connect my lines, then set the target pressure. After a couple tries I got the hang of it. Super convenient. I think it was totally worth the money. But I’m a gadget guy. 😆
Can you explain what it does? Is it acting as a regulator?
 
Alright, here’s a preview of my ARB Pressure Control install to go with the compressor.

Hopefully I’ll get a video together at some point but wanted to get some photos posted in case they are helpful to anyone.

I installed the pressure control module above the spare tire. There was already a nice hole to use to bolt on a small plastic box with a washer. The plastic box keeps the pressure control dry and in place. Since my air tank is in front of the spare tire, it made the connections relatively easy. I also got power by tapping into the signal wire from the upfitter switch to the compressor. (That way it’s only on when the compressor is also on.) The electrical connections for both power and ground are routed through some fused blue sea terminals you see mounted on my bumper. I’m still trying to decide if I should squirt silicon around these or leave them as-is.

View attachment 62085View attachment 62087View attachment 62088View attachment 62090

View attachment 62091
Do you have a link for the waterproof box you used? Seems the link you used in your post is no good. Would you still recommend that box or something different?
 
Do you have a link for the waterproof box you used? Seems the link you used in your post is no good. Would you still recommend that box or something different?
Yup. I like it! Link is fixed in the original post. Here it is as well for reference.

Zulkit Junction Box ABS Plastic Dustproof Waterproof IP65 Electrical Boxes Hinged Shell Outdoor Universal Project Enclosure Clear Cover with 2 Cable Glands 5.9 x 5.9 x 3.5 inch (150x150x90 mm) https://a.co/d/5Xoe6d9
 
Yup. I like it! Link is fixed in the original post. Here it is as well for reference.

Zulkit Junction Box ABS Plastic Dustproof Waterproof IP65 Electrical Boxes Hinged Shell Outdoor Universal Project Enclosure Clear Cover with 2 Cable Glands 5.9 x 5.9 x 3.5 inch (150x150x90 mm) https://a.co/d/5Xoe6d9
Did you use the factory ARB switch included or did you run the purple wire straight to the upfitter switch wire under the hood? How did you power your pressure control module?
 
Did you use the factory ARB switch included or did you run the purple wire straight to the upfitter switch wire under the hood? How did you power your pressure control module?
I built my own plug to connect the arb to the upfitter wire. Here’s the post that shows the plug and links to the parts.

Post in thread '22 Black Bear 🐻 Build'
https://www.fordtremor.com/threads/22-black-bear-🐻-build.9427/post-238910

I also tapped into this yellow wire to get power to the pressure control. This way the pressure control is only on when I turn on the compressor with the upfitter switch.
 
Alright, here’s a preview of my ARB Pressure Control install to go with the compressor.

Hopefully I’ll get a video together at some point but wanted to get some photos posted in case they are helpful to anyone.

I installed the pressure control module above the spare tire. There was already a nice hole to use to bolt on a small plastic box with a washer. The plastic box keeps the pressure control dry and in place. Since my air tank is in front of the spare tire, it made the connections relatively easy. I also got power by tapping into the signal wire from the upfitter switch to the compressor. (That way it’s only on when the compressor is also on.) The electrical connections for both power and ground are routed through some fused blue sea terminals you see mounted on my bumper. I’m still trying to decide if I should squirt silicon around these or leave them as-is.

View attachment 62085View attachment 62087View attachment 62088View attachment 62090

View attachment 62091
Did you use 1/4” air lines for your pressure control module? If so what reducer and increaser did you use to connect the 1/4” air lines to the 1/8” ports on the pressure control module?

Also, for your signal wire that’s connected to your ARB do you only have the 14g yellow wire connected to the plug or did you also add a ground to the plug like the ARB plug has?
 
Last edited:
Did you use 1/4” air lines for your pressure control module? If so what reducer and increaser did you use to connect the 1/4” air lines to the 1/8” ports on the pressure control module?

Also, for your signal wire that’s connected to your ARB do you only have the 14g yellow wire connected to the plug or did you also add a ground to the plug like the ARB plug has?
I did use the arb 1/4” air hoses. I connected them to the pressure control with these:

 
Ok that’s what I bought but those are too big for the pressure controller. It looks like the diameter on the pressure controller is 1/8” and not 1/4”. Is there two different size pressure control modules?

Also, for your signal wire that’s connected to your ARB do you only have the 14g yellow wire connected to the plug or did you also add a ground to the plug like the ARB plug has?
 
I’m not sure if this is the correct part or not but this looks like this will work to connect the arb air hose to the pressure controller. Or maybe I accidentally bought a smaller size pressure controller by accident

 
Ok that’s what I bought but those are too big for the pressure controller. It looks like the diameter on the pressure controller is 1/8” and not 1/4”. Is there two different size pressure control modules?

Also, for your signal wire that’s connected to your ARB do you only have the 14g yellow wire connected to the plug or did you also add a ground to the plug like the ARB plug has?
Strange. I also bought these, but I think they are the same.
ARB ADAPTER 1/4 NPT(M) JIC-04(M) 2PK

 
Back
Top Bottom