-
Featured
- #81
It's been Monday for like a day! The suspense is killing me!Very soon!!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
It's been Monday for like a day! The suspense is killing me!Very soon!!
Haha! I feel that all the time!It's been Monday for like a day! The suspense is killing me!
I checked and my marine VHF handheld actually has dual VHF/GMRS capability. I guess I need to get a GMRS license! I also have a handheld CB which gives me some capability in the HF range too.I was curious about this topic as well as I have some VHF handhelds from past boating usage. I found this article which I thought provides a good overview:
What is the Difference Between UHF & VHF & HF and GMRS & FRS?-HQT Solutions
This articles shows you the difference between UHF & VHF & HF and GMRS & FRS. How much do you know about GMRS and FRS?m.hqtsolutions.com
midlandusa.com
Just in case anyone is reading this thread and trying to find the group buy on the Midland radio, here it is!Haha! I feel that all the time!
The final details are being completed as we speak! Look for it this week!
I was going to do a similar setup with the OEM DRW light bar and have a boost circuit made to make the bar light up 10-20% brighter when the brake pedal is depressed. If it's just the truck increasing the voltage on the High Mount Stop wire you mentioned, then I can scrap my PCB design and it will be simpler.Added the DRW rear brake/light bar using the Harness from Limitless to make for a super clean install! This particular light I bought is compatible with the OEM/factory plug (which is what is on the Limitless harness). This light also has a “get brighter” function that is meant to act as a brake light if you tie the extra “red brake” wire into your brake lights. However, I found a cleaner solution… there was a blunt cut yellow and blue wire near the rear bumper labeled “YE/BU………HIGH MOUNT STOP”. This wire is normally used to connect the third brake light on a camper shell. So, it lights up when you unlock the truck, works as a running light, and functions as a brake light. Love it!
View attachment 59201
View attachment 59202
It does have a separate red wire which is what I connected to the “YE/BU………HIGH MOUNT STOP” wire on the truck. It might just be increasing the voltage to the LEDs bc the lights just get brighter when the brake is applied.I was going to do a similar setup with the OEM DRW light bar and have a boost circuit made to make the bar light up 10-20% brighter when the brake pedal is depressed. If it's just the truck increasing the voltage on the High Mount Stop wire you mentioned, then I can scrap my PCB design and it will be simpler.
Edit: I saw the DRW bar on Amazon you got and noticed that it does have a separate wire that is spliced to the brake light after all.
Can you take a pic of the bar in the daylight with the truck off and the bar not lit up? Want to see how 'hidden' it looks with the clear lens on it.
Finally ran the switches today for these rear lights.Here’s some pics of the final rear light install.
View attachment 58815
- UBL color flood mini (white and amber)
- 1-1/2” Right angle aluminum tubing cut to 4 inches long and painted black
- Adhesive rubber between the bracket and the truck
- Attached to truck using factory bolts on the bumper
View attachment 58816
View attachment 58817
Daylight photos!Can you take a pic of the bar in the daylight with the truck off and the bar not lit up? Want to see how 'hidden' it looks with the clear lens on it.
Got the install video up on YouTube!Added the DRW rear brake/light bar using the Harness from Limitless to make for a super clean install! This particular light I bought is compatible with the OEM/factory plug (which is what is on the Limitless harness). This light also has a “get brighter” function that is meant to act as a brake light if you tie the extra “red brake” wire into your brake lights. However, I found a cleaner solution… there was a blunt cut yellow and blue wire near the rear bumper labeled “YE/BU………HIGH MOUNT STOP”. This wire is normally used to connect the third brake light on a camper shell. So, it lights up when you unlock the truck, works as a running light, and functions as a brake light. Love it!
View attachment 59201
View attachment 59202
Are you running the Zflash and the wicked warnings Mirror override/strobe? ie - can they work together?Got my Zflash BCM installed and connected to upfitter 6 (which i changed to always hot). This video shows how to access and use the pass through wire if that is helpful to anyone.
Yes. They work together because they flash different lights.Are you running the Zflash and the wicked warnings Mirror override/strobe? ie - can they work together?
Thanks!!Dash switches look clean !
So it’s rained for a few days and my color flood mini lights have some moisture inside the lenses. Hopefully they dry out, but I’m not convinced they will survive long term with the water intrusion.Here’s some pics of the final rear light install.
View attachment 58815
- UBL color flood mini (white and amber)
- 1-1/2” Right angle aluminum tubing cut to 4 inches long and painted black
- Adhesive rubber between the bracket and the truck
- Attached to truck using factory bolts on the bumper
View attachment 58816
View attachment 58817