22 Black Bear 🐻 Build

Hmmm... I don't think he stated his level of inebriation one way or the other. :unsure:

Maybe there's more to the story 😂 🍻
I am confident there is more for sure!!
 
Posting to watch the thread because I'm interested in how you like your new tires, also just because. 😁
First day driving on them was great. Much quieter at highway speeds than the old tires. They seem to handle well and track straight.
 
Pretty excited about this upgrade! Love the Rigid floodlights in the bed!


 
Interesting.

So these are just standard flood pods?

It's hard to see in the video.
Yep, I added the link in the post above... it's the Rigid SR-Q Series PRO flood diffused pods.

 
Yep, I added the link in the post above... it's the Rigid SR-Q Series PRO flood diffused pods.

That is a lot of light for such a small enclosed area!

How did you mount them?
 
That is a lot of light for such a small enclosed area!

How did you mount them?
I used a couple of these SuperMag 2-Hole Flat Straight Bracket (one on each side of the bed) to bold the lights to the existing hardware clamps for my Truck Gear Line-x LXP (BAKFlip MX4) tonneau cover.

 
I used a couple of these SuperMag 2-Hole Flat Straight Bracket (one on each side of the bed) to bold the lights to the existing hardware clamps for my Truck Gear Line-x LXP (BAKFlip MX4) tonneau cover.

Here’s the idea…

IMG_0403.webp


I’ve cleaned up all the wiring too since this photo. All the wires are in plastic split loom and zip tied up to the holes along the upper edge of the bed side.

Oh, and here’s the switch mount I fabricated. It is attached to the BuiltRight panel using a MOLLE nut. 🥜 🔩

IMG_0723.webp
IMG_0710.webp
 
And….I’ve got a set of @Baja Designs Squadron Pros in the garage needing some sort of job. Just when I thought I didn’t need more light.

Thanks for the idea.
 
And….I’ve got a set of @Baja Designs Squadron Pros in the garage needing some sort of job. Just when I thought I didn’t need more light.

Thanks for the idea.
True indeed but PRO's?? It'll be too much light, you will blind yourself.

I have some sports and some rigids that I may consider.

Excellent idea @legmar
 
True indeed but PRO's?? It'll be too much light, you will blind yourself.

I have some sports and some rigids that I may consider.

Excellent idea @legmar
Thank you!! 😁
 
Got the Rough Country 40-Inch Chrome Series White DRL LED Light Bar installed over the weekend! I used the hardware it came with to mount directly to my bumper. It was fairly easy to drill 2 holes for the bolts and affix a nut on the bottom by popping off the front plastic trim pieces. I had to use a couple wobble extensions to get to the nut, but it was pretty easy. Only mistake I made is that the light bar is pointed slightly down (not bad, but the perfectionist in me is annoyed) because I installed the light bar while my truck was parked on my steep driveway... oops.

I know guys that talk about how cheap Rough Country is and how they'll never have it on their trucks... I think I agree when it comes to suspension parts, but I'm happy to try this light for less than $200 and see how long it lasts. It's MUCH brighter than even the factory OEM High Beam LEDs. And for anyone that asks, I leave the plastic cover on the light bar during normal driving in town. The intent of a light like this is for driving off-road or in rural areas/parks with no oncoming traffic.

A couple other install notes... I was able to slide the provided wiring harness through the firewall grommet on the driver side of the engine bay. It was plenty long. Had to cut a small slit in the grommet. Be careful not to nock out the grommet when pushing your wire through.... my roommate and I did, and we had to spend 30 min working to get the grommet back into it's original position.

As for power, most of my accessories are attached to the passenger battery. Since I was routing the power harness through the driver side of the truck, I decided to get power from the driver side battery. I drilled a hole in the positive terminal and added a small bolt/nut to attach the ring from the harness. The negative/ground on the frame was a bit hard to remove due to clearance, so it was easier to just connect the negative side of the harness directly to the battery since the negative terminal already had a post on it.


View attachment 169587View attachment 169588View attachment 169589View attachment 169590
I'm looking at similar. How does it look in your front view camera?
 
New tires!! 🛞

FALKEN WILDPEAK A/T4W LT285/75 R18 129S E1 BSW with snow ❄️ ⛄️ rating!

Replaced my duratracs right at 37,000 miles.


They price matched my local Ford dealer, so my out the door price for 4 tires installed was $1,444.

View attachment 170901View attachment 170902View attachment 170903View attachment 170904View attachment 170905View attachment 170906View attachment 170907
those look great
 
those look great
Thanks! They have handled great too in many conditions - and they are so quiet. I'm quite pleased with them!
 
Got the Rough Country 40-Inch Chrome Series White DRL LED Light Bar installed over the weekend! I used the hardware it came with to mount directly to my bumper. It was fairly easy to drill 2 holes for the bolts and affix a nut on the bottom by popping off the front plastic trim pieces. I had to use a couple wobble extensions to get to the nut, but it was pretty easy. Only mistake I made is that the light bar is pointed slightly down (not bad, but the perfectionist in me is annoyed) because I installed the light bar while my truck was parked on my steep driveway... oops.

I know guys that talk about how cheap Rough Country is and how they'll never have it on their trucks... I think I agree when it comes to suspension parts, but I'm happy to try this light for less than $200 and see how long it lasts. It's MUCH brighter than even the factory OEM High Beam LEDs. And for anyone that asks, I leave the plastic cover on the light bar during normal driving in town. The intent of a light like this is for driving off-road or in rural areas/parks with no oncoming traffic.

A couple other install notes... I was able to slide the provided wiring harness through the firewall grommet on the driver side of the engine bay. It was plenty long. Had to cut a small slit in the grommet. Be careful not to nock out the grommet when pushing your wire through.... my roommate and I did, and we had to spend 30 min working to get the grommet back into it's original position.

As for power, most of my accessories are attached to the passenger battery. Since I was routing the power harness through the driver side of the truck, I decided to get power from the driver side battery. I drilled a hole in the positive terminal and added a small bolt/nut to attach the ring from the harness. The negative/ground on the frame was a bit hard to remove due to clearance, so it was easier to just connect the negative side of the harness directly to the battery since the negative terminal already had a post on it.


View attachment 169587View attachment 169588View attachment 169589View attachment 169590
Does this block the view from the camera at all? I was originally looking at a 20" between the tow hooks but the look of this or the single row bar looks good. I like the idea of the larger light and being slightly higher seems to fit the headlights/fog lights better.
 
Does this block the view from the camera at all? I was originally looking at a 20" between the tow hooks but the look of this or the single row bar looks good. I like the idea of the larger light and being slightly higher seems to fit the headlights/fog lights better.
It blocks a bit. But it doesn’t block enough to bother me. It also barely affects the 360 view. Here’s what it looks like.

IMG_1705.webp
 
I added a 12V Cigarette Lighter Multi-Socket Port to the bed.

IMG_0471.webp


It’s powered by my BlueSea 150 Amp Safety Hub. In this photo, the green arrows point out how I routed the power cord. The top of the bed rail has some convenient holes to attach zip ties every foot or so… The blue arrow shows where I “attached” the multi-socket port to the BuiltRight rack. I had the idea to super glue a couple of magnets to the back of the port, and then I just “stick” it to the metal BuiltRight rack anywhere I want. It’s super convenient to slap it on the bottom of the rack, but I left enough slack in the cord that I could move it around if I want. I like it oriented this way to prevent cigarette adapter plugs from wiggling around or falling out during transit. I’ve tested this theory on some pretty harsh roads for hours in 4WD, and the plug stays secure in the socket! The port also has some USB power, but I am unsure if I’ll ever need or use those in the bed. Doesn’t hurt to have them though!

Oh, and an essential part of the design of this particular multi-socket port is the power button that shows the voltage and allows you to turn power on/off to the ports. I love being able to turn off any connected electronics without having to unplug them (since the power from my SafetyHub is always hot).

IMG_0724.webp
 
Back
Top Bottom