What's your top 5 modifications you have done/plan to do?

According to weathertech website, it only gives an option for front/passenger HP mats. Has anyone picked up a set for their sd?
Part Number: 471012-1-2IM

Vehicle: Ford 2022 F-250/F-350/F-450/F-550

Set: 1st & 2nd Row

Color: Cocoa

Quantity: 1

$224.90

This was my order; you may have different options. If you have vinyl flooring, (carpet delete) these may not work. Check their site for more details.

Same number for mine (rear under-seat storage, carpet) got them in black though
 
Try adjusting your tire pressures. The consensus is, you don't need to have the psi maxed out for daily driving. Those high pressures are meant for max towing capacity. Daily driving pressures are much lower. Air up when needed so you can enjoy the ride in between.
Nice..my first mod (reduce tire pressures) ...what should they be for daily driving?
 
I think you’ve got to clarify which weathertech product when you’re making this argument. I’ve got the original WTs in my 2014 Chevy, my dad has the Husky’s in his tundra. I considered both for my Tremor. My old weathertechs are stiff, slippery when clean, and a little faded. My dad’s huskys are nice but the soft rubber (and deep tread) is difficult to clean and the coverage in the ‘22 tremor is subpar. I went with the new (and more expensive) weathertech HPs. They are the perfect blend between the OG weathertechs and the huskys. It’s a softer more flexible rubber (like the huskys but not quite as soft), they’re not slippery at all, and the coverage blows the doors off husky’s products for the ‘22 model year. I also had zero issues with fitment which has been discussed all over this forum, and I suspect most of those issues were with the stiffer original WTs. Just my $.02. I love them.
I have tried the Weathertech HP. The Husky contours are miles better. Much better feel.
 
Old mans Truck can't do just 5 ..:cool:..
ARE Topper, Bed Slide, Bed Rug, Carli Pintop, Helwig Big Wig, Sulastic Shackles, BD Lighting, Console Refrigerator, Winch, Rocker Guards, Midland GMRS, Garmin Dash Cam.
Because I'm lazy and easily side tracked, yet to be installed .. Raptor Wheel, Nav TV Module, OBA, 2k Inverter, Banks Throttle Module, Warn Hubs and several LED Light switches ?? I had to have . . ;)
 
1. Shocks
2. Ditch Lights
3. 60 gallon fuel tank
4. Falken AT3 tires
5. Pusher Intake manifold

Have many more! Think I am done, lol.
Is the pusher intake setup worth the money? Did you notice a performance improvement? I've been eying it up for awhile but cant convince myself to pull the trigger.
 
DONE:
Window Tinting
Pin-Striping
BED HARD COVER
5th Wheel
Load Leveler on Rear Suspension
PUTCO 60" Rear Light System
Ceramic Coating
Front/Rear Splash Guards

Want to do:
MAYBE rims/tires @ some point
Actually very happy with my truck
 
Finished Mods
1. Added upfitter switches
2. ARB single, mounted under the hood
3. Front and rear dash cam (Rexing)
4. Self made hood latch guard
5. Bulletproof hitch 8 inch drop with Sway Control Dual Ball

Planned Mods:
1. Behind grill light bar
2. Rear pod lights
3. Multiple quick connect air connectors front and rear (to ARB)
4. In bed lock box

Possible Mods:
1. PA
2. CB
3. Ceramic window tint
4. 5th wheel prep kit
 
Still trying to decide on cover for bed of truck. Had a mx4 bakflip on my raptor...planning to go with that again I guess. Anyone have a mx4 and went with something else?
 
Anyone have a good phone holder?
Also looking to get some seat protection for my dog in the back. What do you use?
I got mine from OFF ROAM. It's a little pricey, but a very solid mount! I was able to make the one they offer for the 17-21 F250s work on my 2022 with Sync 4.
 

Attachments

  • OffRoam phone mount 2022 F250 w Sync 4.webp
    OffRoam phone mount 2022 F250 w Sync 4.webp
    86 KB · Views: 106
  • Tailgate damping system from Ford. Used daily.
  • Second Ford OEM antenna installed on driver’s front fender. Used with Uniden SDS200 Scanner.
  • Ford Factory winch.
  • VanTop H612T Dash Camera. Used every engine start.
  • Yaesu FTM-400XDR Radio.
  • GillExpedition Front Center Seat Headrest Storage Organizer Tray Cup Holder. Used daily.
 
My top 5 completed:
1) Tint + PPF (20% side glass 70% windshield = perfection *chefs kiss*, first thing I do to every vehicle I own)
2) Line-X
3) Truxedo Sentry-CT bed cover
4) Weathertech HP floor liners
5) Carli Pintop with all the goodies

My top 5 still to do:
1) Gears and a front traction device; currently torn between going with 4.10's which would get me back a little bit better than I was stock and preserve at least some of my highway performance/mileage, or just going all in on 4.56's which would get me closer to a stock Tremor... the stock 3.55s (my truck is not a Tremor) were ok with the stock 34's but after just short of 10000 miles with 37's since I did the lift, you really notice it around town and in the hills
2) Bumpers - going Ranch Hand legend prob with their matching side steps (will probably also mount some more lights to go with my BD SAE fogs when I do this)
3) Winch with one of those cradle mounts
4) Carli hitch so I can stop carrying my spare in the bed on long trips
5) Camper (thinking a GFC Platform camper most likely)
 
1.) Wheel well liners front and rear. Weather tech floor mats.
2.) BD diesel High idle kit.
3.) Apollo optics LED taillight and license plate bulbs.
4.) Center council safe.
5.) Linex Bed Liner

Next on the list
-Bed cover (Bak MX4 and there tool box).
-Baja Designs LED fogs
-Redoing dealership tint with xpel ceramic

Maybe on the list
-Larger fuel tank
-Amp power steps (girlfriend keeps complaining)
-shock upgrade
-wheels/tires
 
Get the Uniden R7 or the newer R8 radar detector. I've had my R7 for four years and it's paid for itself a dozen times. If you really want to get crazy, the Uniden R9 puts you in complete stealth mode but your looking at $3,999.
 
1.) Wheel well liners front and rear. Weather tech floor mats.
2.) BD diesel High idle kit.
3.) Apollo optics LED taillight and license plate bulbs.
4.) Center council safe.
5.) Linex Bed Liner

Next on the list
-Bed cover (Bak MX4 and there tool box).
-Baja Designs LED fogs
-Redoing dealership tint with xpel ceramic

Maybe on the list
-Larger fuel tank
-Amp power steps (girlfriend keeps complaining)
-shock upgrade
-wheels/tires
which safe did you go with?
 
which safe did you go with?
Clemsonodds:
Just went with the ford accessories one.
It’s just a lid that has four self tappers screw into the center console. 359.99 at dealer. They had some in stock. Had one on my 2020 as well. That one had more bracing if you will.

But it keeps a valet person honest.
 
Dongar Technologies 16-pin Harness
Violoncello V119 dash cam
Diamond back HD cover
Baja design squadron pros X2
Ravelco anti theft
Builtright dash mount with ram mounts
Rodd187 warning covers
Gatorback mudflaps
 
Last edited:
DONE:
Window Tinting
Pin-Striping
BED HARD COVER
5th Wheel
Load Leveler on Rear Suspension
PUTCO 60" Rear Light System
Ceramic Coating
Front/Rear Splash Guards

Want to do:
MAYBE rims/tires @ some point
Actually very happy with my truck
Which ceramic coating did you go with? Also, do you have pictures of your pin striping? thanks
 
  • Ceramic coated with PPF on front bumper, headlights, and mirror caps. Window tint with 95% UV film
  • Bedrug and BakFlip MX4
  • Uniden CMX760 CB, mounted in console
  • ARB twin compressor with Dirtchurch mount. Includes 2.5gal Viair tank mounted above spare tire and electric dump valve connected to an upfitter switch. System also has Hornblaster AH-2chime horn, with LIMITLESS Autoworks relay harness.
  • BMC rear backup lights
  • Bulletpoint dash phone mount
 
Last edited:
23 SRW ultimate lariat Rapid Red with BAP.
Done

Bakflip MX4
Husky Weather Beaters
Rough County bed mat
FORD OEM rear dually Running Light (and harness)
Driver pass window tint
7 year Ceramic paint protection.
12000 lb safety chain connector
LOCAME 6 in drop tri ball with chain hook hitch
2.5 in to 2 in reducer hitch sleeve
Husky
Shocker Air Hitch with sway control ball and pintle combo
Bed Molly ( accessories that attach, gas can x2, molle attachment straps x4 sets, Molly pouches 1 lg 2 small, Fire extinguisher, and traction boards.)
Amp side step x2
Tufskinz front and rear black lettering
Ikonic 7.3 Godzilla emblem Black outline with miror red middle.

Want

Vinyl Wrapped Black front and rear bumpers
Wicked 4 link 6in lift ( could be talked into diffrent brand)
puddle light (that read TREMOR)
led under glow and Rock Lights
Badlands behind bumper winch.
Over Cab saffari cargo rack (might change to leer topper with rack instead)
(Wheels, and tires undecided)
 
Back
Top Bottom