🛠️ What did you do to your Tremor today? [2026 edition]

Just bought the new KC Jetfire turbo that just came out for my '24. Hoping to install it in the next week or so. Planning on welding the crank gear while I'm balls deep in the engine.

Post video of screaming turbo please.
 
Often when using Coil-overs and additional shocks, both shocks are tuned MUCH lighter to allow much better control over the suspension travel as they are valved properly for that configuration. Take that single shock off and use it on your truck you would feel the ride difference immediately.

:cool: :cool: :coffee: :coffee: 🇺🇲 🇺🇲 🇺🇲 🇺🇲


You are 100% correct. After driving it both ways, I thought it better with the extra 2.0 shock. The wheel and tire combo is so heavy, and with all the other stuff he has, we decided to leave it as we thought the extra dampening helped vs without it and allowed him more adjustability with the DSC as we could turn it down. This is temporary, we will eventually go with a bypass for the ultimate in control.
 
Removed the gray decal. Applied a matte.
that's a good look.

I wasn't quite sure what to think from your first post until got the pictures. I'm not big on the OEM decal, especially as it came in GORANGE for my color, so only someone really dialed in would know I'm in a Tremor. I might have left the grey one. I like what you did there
 
Made myself a simple bed divider. Last one I had for previous truck was just a plain bare piece of 2x10. Just got my new to me Tremor so I decided to make it a little more unique.
Only thing I didn’t like about it is that the local Ace hardware only had basic red spray paint. Nothing that really came close to matching the red of my truck. Still, it turned out nice enough for a bed divider.
 

Attachments

  • IMG_1360.webp
    IMG_1360.webp
    291.4 KB · Views: 44
  • IMG_1361.webp
    IMG_1361.webp
    201.2 KB · Views: 41
You are 100% correct. After driving it both ways, I thought it better with the extra 2.0 shock. The wheel and tire combo is so heavy, and with all the other stuff he has, we decided to leave it as we thought the extra dampening helped vs without it and allowed him more adjustability with the DSC as we could turn it down. This is temporary, we will eventually go with a bypass for the ultimate in control.
Let's get it ordered! 😁
 
Made myself a simple bed divider. Last one I had for previous truck was just a plain bare piece of 2x10. Just got my new to me Tremor so I decided to make it a little more unique.
Only thing I didn’t like about it is that the local Ace hardware only had basic red spray paint. Nothing that really came close to matching the red of my truck. Still, it turned out nice enough for a bed divider.
Brother, that came out really nice. Got me thinking I need to do something similar for my truck. Thanks for sharing!
 
Made myself a simple bed divider. Last one I had for previous truck was just a plain bare piece of 2x10. Just got my new to me Tremor so I decided to make it a little more unique.
Only thing I didn’t like about it is that the local Ace hardware only had basic red spray paint. Nothing that really came close to matching the red of my truck. Still, it turned out nice enough for a bed divider.
That looks incredible. Get you a bunch of vinyl tremor stickers and you can be ETSY rich 🤔
 
Factory tailpipe “tip” back from cerakote. Planning to install tonight.

View attachment 251398
Did you cut that and reweld it or did you have to pull off the entire assembly going back to the flange that connects to the intermediate pipe?

Or am I just stupid and don't realize there is some way to detach just the twin tailpipe?

And that looks great BTW.
 
Did you cut that and reweld it or did you have to pull off the entire assembly going back to the flange that connects to the intermediate pipe?

Or am I just stupid and don't realize there is some way to detach just the twin tailpipe?

And that looks great BTW.
I actually found a take off and took the whole thing to my buddy to coat it. I have my factory tailpipe on now and will just swap the complete pipe out.
 
Unobtrusive analog EGT gauge. At least unobtrusive if you’re sitting anywhere other than the drivers seat.

ETA: Guage looks hazy in photo because I haven't removed the protective plastic layer from the factory yet.

IMG_6256.webp
 
Just ordered one of these babies...
1775064643751.webp
 
Just ordered one of these babies...
View attachment 251629
That's exactly what @TremorDune313 is giving away with every Tremor Badlands Edition purchase!:

Post in thread 'Tremor Badlands Edition 2027' https://www.fordtremor.com/threads/tremor-badlands-edition-2027.23725/post-539438
 
Did you get the beer holder attachment? That's the one I was looking at. I also was considering the influencer kit with the trail spray for instant online cred.
Didn't get that far yet. It's still morning for me... 🥱 :ROFLMAO: :ROFLMAO:
 
Back
Top Bottom