Water Intrusion to Fuse Box - Whiteface Ford

One could bring up the ol' "straw that broke the camel's back", here

Sounds pretty ignorant to me.


We let a lot of your severe snark fly on by, but what you just told that feller above is just an unkind thing to say. There's a chip on your shoulder if you haven't seen it.

Some folks like to care for their rigs using factory parts. That is not "ignorant" - it's just a perogative, I guess, as it is your perogative to be sometimes just nasty.

*shrug*
 
You buy a Ford piece of plastic for 5X the cost versus that of members here that are actually making a better product??? What are you risking??? Sounds pretty ignorant to me.
Vancouver Island, BC, Canada.
I don't think Stan or Richard are currently shipping to Canada. Not many options that side of the border.
 
One could bring up the ol' "straw that broke the camel's back", here




We let a lot of your severe snark fly on by, but what you just told that feller above is just an unkind thing to say. There's a chip on your shoulder if you haven't seen it.

Some folks like to care for their rigs using factory parts. That is not "ignorant" - it's just a perogative, I guess, as it is your perogative to be sometimes just nasty.

*shrug*
It's a PIECE OF PASTIC to stop rain dripping on a fuse panel...you don't need OEM parts for that!!! No chip here...just think that buying a $150 piece of plastic versus a $35 piece of plastic is well..................
 
Vancouver Island, BC, Canada.
I don't think Stan or Richard are currently shipping to Canada. Not many options that side of the border.
There are several other on-line vendor options available for under $50.
 
Unless the part is made in Canada, it can easily be over double to triple the cost in duty fees to import stuff by freight. Unless there is a retailer importing the parts (which would still be double) its generally not worth buying parts in the US unless you just can't get it in Canada. Reverse is much easier/cheaper. I have bought parts made in Canada and the UK directly and the import/shipping tends to be pretty moderate.
 
I just imported 5000ft of Aluminzied tubing from a mill outside of Toronto. I was hit with 50% duty at the border. My usualy mill wasn't planning on running this specific size until lat January.
 
Back
Top Bottom