MIXDEMOTIONSFOX
Tremor Buff
I have a 2024 F250 Tremor that I did the Carli back country kit on it with the camber bushings for upper ball joints. If Im turning about 1/4 of the way left or right and hit a bump the tires will rub the little plastic numb on bottom of inner fender.
Truck has 37x12.50r18 Toyo open country at3 on it. Race line wheels 18x9 zero offset.
Question is the bushings rolled the spindle back a bit. THe springs are in a bind as well. Because the axle is not rolled back like it would if had radius arms. Just the knuckle is. If I where to put carli radius arms on it and stock ball joint bushing in it do you think it would roll axle forward enough to fix it?
Truck has 37x12.50r18 Toyo open country at3 on it. Race line wheels 18x9 zero offset.
Question is the bushings rolled the spindle back a bit. THe springs are in a bind as well. Because the axle is not rolled back like it would if had radius arms. Just the knuckle is. If I where to put carli radius arms on it and stock ball joint bushing in it do you think it would roll axle forward enough to fix it?