Rodd187 Build Thread

On my short list of to do upgrades( or in this projects case get back the standard-equipment-grade) I am planning to do my cup holder ambient lighting and currently have F150LED "pucks" in there to tide me over and like the "Tremor" badging it adds. Where did you get these inserts? I read over your build again and may have missed it but I didnt see where they were from.

1701443035523.webp


Thanks bud!
 
Shibbyjeep said:
On my short list of to do upgrades( or in this projects case get back the standard-equipment-grade) I am planning to do my cup holder ambient lighting and currently have F150LED "pucks" in there to tide me over and like the "Tremor" badging it adds. Where did you get these inserts? I read over your build again and may have missed it but I didnt see where they were from.

View attachment 136177

Thanks bud!
Click to expand...
Of course man, I got the "pucks" from Etsy and I got the wiring harness from @JHForman812 who custom makes them. You also have to order these two parts if you don't already have the illuminated cupholders but do have ambient lighting.

​

HC3Z14A318E Wire assembly​

OEM NEW Ford Wiring Assembly - Interior Lamp HC3Z-14A318-C​

 
Wife was sick on the couch and kids were at school so finally got around to installing my Banks Rear Differential Cover and Banks Monster Exhaust from the group buy. Super smooth install on the diff cover, very straightforward.

The Monster exhaust also went fine but I did discover that the Talon DPF cover does not fit around the 5" pipe. I had to modify/cut the rear of the Talon guard so the pipe could pass through. This caused me to have to repaint the guard and also decided to paint the last pipe and clamp since I had the primer and paint out. For those of you with the short bed, you also have to cut the intermediate 5" pipe down to a specified length. Not hard at all especially if you use a vice and band saw.

I will post pics of the exhaust when I get a second coat on the pipe and install the exhaust on the truck.
IMG_1135.webp

IMG_1136.webp

IMG_1137.webp

IMG_1138.webp
 
Rodd187 said:
Wife was sick on the couch and kids were at school so finally got around to installing my Banks Rear Differential Cover and Banks Monster Exhaust from the group buy. Super smooth install on the diff cover, very straightforward.

The Monster exhaust also went fine but I did discover that the Talon DPF cover does not fit around the 5" pipe. I had to modify/cut the rear of the Talon guard so the pipe could pass through. This caused me to have to repaint the guard and also decided to paint the last pipe and clamp since I had the primer and paint out. For those of you with the short bed, you also have to cut the intermediate 5" pipe down to a specified length. Not hard at all especially if you use a vice and band saw.

I will post pics of the exhaust when I get a second coat on the pipe and install the exhaust on the truck.
View attachment 139770
View attachment 139771
View attachment 139772
View attachment 139773
Click to expand...
Man you have all the "MacDaddy" tools!!! Nice!
 
Rodd187 said:
No issues at all, just ran black cable to negative post and red cable to positive post. I also wrapped the wire in convolute to give it some additional protection. (they are the two wires with the red arrows in the pic below). I did have to remove my Banks air filter to get access to the wires. Voltage on both batteries and remote posts all are identical with truck off and when it is running.

View attachment 126959
Click to expand...
Did you fuse the positive wire for the jumper?
 
Rodd187 said:
Actually I did not but probably should. Not a bad idea, what size fuse are you thinking?
Click to expand...
I guess it depends if you would ever use the remote terminals to jump the truck or just for trickle charging or trying to get enough power to unlock the doors.
 
legmar said:
I guess it depends if you would ever use the remote terminals to jump the truck or just for trickle charging or trying to get enough power to unlock the doors.
Click to expand...
True, it is only used for trickle charging or a jump box attached to power up the batteries to gain entrance to the truck. It will never be used as a jump location.
 
You must log in or register to reply here.

Tremor Forum Fav 👍

nextzett Klima-Cleaner Air Conditioner Cleaner nextzett Klima-Cleaner Air Conditioner Cleaner - Grab one through Amazon!

Tremor Forum Photos

Latest Discussions

Back
Top Bottom