Juggernaut retractable ratchet straps on the BoxLink

[thetremorbuild]

Juggernaut Designs sent me a set of their Ultimate Retractable Ratchet Straps for the Ford BoxLink, so here's a quick rundown for anyone looking at them for a Super Duty.

They mount right to the factory BoxLink spots, so it's a direct fit with no drilling and no bed mods. All the hardware is included, and the only tool I needed was a T30 Torx bit. There's also a weather cover for the ratchet. Per Juggernaut, the mounts are made in the USA and the brackets carry a lifetime warranty.

Anyone else running something on their BoxLink?

 

[Nick22]

I finally decided on the Juggernauts the other day. Was going back and forth between them and the Rhino ones. Going to hold out and see if they have a Black Friday deal

 

[BoonesRide22🇺🇸]

Will these work with the builtright panels?

 

[Nick22]

Will these work with the builtright panels?

I swear I’ve seen a picture somewhere with this combo. Or maybe I just dreamed it up lol

 

[BLACKCHERRY]

I have them and they're one of my favorite additions! Zack's an awesome dude!

 

[Optimus🤖]

Yep yep, we did a group buy with them last June:

📢 DEAL - FordTremor.com 🏷️ June 2025 Group Buy!

The FordTremor.com June 2025 Group Buy is officially LIVE! 🔥 We’ve partnered with Juggernaut Designs to bring you 15% off their Ultimate Retractable Straps, in either a 2-pack or 4-pack, with covers. Regularly priced at $189.99 and $329.99, this is your chance to score top-tier gear at a...

www.fordtremor.com

I had them a bit before that and absolutely love 'em! They just sent me two new covers on the house as they got lost in Moab. Now that's great service!

Will these work with the builtright panels?

Post #8 in the above thread, @JayTremor writes:

"I have them with the Built Right panal. They mount inside the opening but will not rotate without cutting the panel for clearance.
I did not cut the panel. If a base was made to push out the ratchet it would allow 360 rotation." Hopefully this helps.

 

[BFill85_KRTremor]

Yep yep, we did a group buy with them last June:

📢 DEAL - FordTremor.com 🏷️ June 2025 Group Buy!

The FordTremor.com June 2025 Group Buy is officially LIVE! 🔥 We’ve partnered with Juggernaut Designs to bring you 15% off their Ultimate Retractable Straps, in either a 2-pack or 4-pack, with covers. Regularly priced at $189.99 and $329.99, this is your chance to score top-tier gear at a...

www.fordtremor.com

I had them a bit before that and absolutely love 'em! They just sent me two new covers on the house as they got lost in Moab. Now that's great service!


Post #8 in the above thread, @JayTremor writes:

"I have them with the Built Right panal. They mount inside the opening but will not rotate without cutting the panel for clearance.
I did not cut the panel. If a base was made to push out the ratchet it would allow 360 rotation." Hopefully this helps.

I contemplated longer torx screws and some black washers to be the “base” to achieve this. But have not pulled trigger on panels

 

[Optimus🤖]

I contemplated longer torx screws and some black washers to be the “base” to achieve this. But have not pulled trigger on panels

It'd be interesting to see if that works!

 

[BFill85_KRTremor]

It'd be interesting to see if that works!

Curiosity will get the best of me sooner of later. I almost bought panels used off here from member to test it.

 

[securityguy]

These are on my BF list. Not very smart to buy them now unless you REALLY need them. BF is less than 4 weeks out.

 

[bbrett]

I have them and love them. they work with the built right panels but just won't swivel