Disabling the modem (pulling the fuse)

Even more the reason to kill the modem. Don’t let these trucks communicate at all with big brother.
To be clear, that new law will only impact vehicles manufactured after the details are hashed out and fully implemented. So 2026 at the earliest. All trucks manufactured today (and for the next 5+ years) will not have the disabling tech, so it shouldn't be used a reason to pull the fuse today.

It also would surprise me if the implementation is dependent on a cellular connection.

As the OP I'm on board with removing the modem fuse, I just doubt it will help that particular scenario. Definitely won't help the scenario today, and skeptical it will help even for the trucks that have the drunk driving feature.
 
I wanted to disable the modem in my truck to guarantee it can't phone home to Ford. Consider it a privacy hack. :) It's pretty simple by pulling the fuse, but still wanted to document the process since it's a combo fuse - one fuse powering two circuits.

Of note: I did this to a 22MY truck with Sync 4. While I believe these same instructions should work for previous model years, double-check the fuse number in the owner's manual and the instructions for performing a master reset.

What it breaks
By doing this you will disable any ability for your truck to connect to Ford's servers. This means no ability for you to control or get information from your truck using the Ford Pass app on your phone in any way. No remote start from your phone, no unlocking/locking the doors from your phone, no DTCs on your phone, etc. Since I just did this tonight, and haven't actually driven the truck yet, there may be something I've missed that's broken. I'll update the thread if I find anything, but I honestly doubt there will be.

Update after driving the truck a good amount: nothing else broken that I can find other than a crossed out cloud in Ford's navigation screen. It's likely there's some functionality in there that depends on a data connection, though I don't personally use the built-in navigation so I can't give details.

If you do this before you get your Ford Pass Points from purchase (42,000 points for a gas truck, 70,000+ for a diesel truck) you may prevent yourself from getting the points. I ended up doing this after I got my points, so I can't say for sure.

What I've confirmed it doesn't break
Truck starts and runs just fine. No service engine or other warning lights illuminated on the dash. Wireless CarPlay and Bluetooth work. Satellite reception still seemed to work, though I haven't used the built-in nav since I got the truck so I didn't put much into testing it (been using CarPlay exclusively for maps). Honestly didn't know what else to check, since the fuse should be pretty limited based on the label. If there's something else you want me to check before you do this yourself, let me know.

Performing a master reset
While this part is technically unnecessary, I wanted to completely divorce my truck from Ford's servers before pulling the fuse for the modem. By performing a master reset, it de-activates your modem on Ford's servers, along with resetting all settings in the Sync system. This did not impact my settings in the gauge cluster.

Find the instructions for performing a master reset here:
Of note, once I told the truck to go ahead with the reset, it took a number of seconds before it actually did it. I started browsing around and then the screen went black. After a number more seconds, the screen came back and everything was reset.

Pulling the fuse
Again, this is specifically for a 22MY truck. If you have a different model year, double-check the fuse location for the modem to make sure you pull the right fuse.

You'll find the fuse in the fuse panel in the passenger foot-well, on the right side when facing the front of the truck. The plastic cover pops off pretty easily, though you may need to fold back or remove your floor mat to get the cover out.

Once in there, the fuses are numbered, but not otherwise labeled. Look for fuse "9" down the right side of the panel; it's 5 amps. The one fuse serves two circuits (it has 3 blades). I believe the center blade is shared power from the battery and each circuit is on either side. Circuit 8 is towards the center of the panel (left side of the fuse), circuit 9 is towards the outside (right side of the fuse).

Circuit 8 is for the modem and the one we want to kill, circuit 9 is for the "Combined Sensor Module" according to the owner's manual. I have no idea what that is even after searching online. With the fuse pulled and both circuits without power I did fire up the truck and everything seemed to be working, but I figured it would be worth restoring power to circuit 9 to isolate my change.

Fuse/circuit 35 is a spare 2 blade, 5 amp fuse. I replaced the wide, 3 blade original fuse with this one, only on the right side, leaving the inner connection for the modem empty. Presumably this restored power to the "Combined Sensor Module", though I have no real way of verifying other than the fact I probed it with a test light and the fuse had power.

While messing with things I pulled the original fuse a few different times so the plastic is pretty weak. I'm going to get a replacement for it, as well as fuse 35. Fuse 35 I'll restore as a spare in the panel and I'll keep the original replacement in the glove box should I ever need to restore power to the modem, though I don't see why I would.

How do I know it worked?
Going into Settings -> Connectivity -> Connected Vehicle Features now shows a spinner before not doing anything else. It doesn't load a page at all. Additionally, the button for Settings -> Vehicle Hotspot is disabled entirely now. Those both are a pretty solid indication to me that the modem is disabled.
Great instructions on this. It is weird you can't physically see the 08 number but you describe it well. It is a three prong fuse in slot 9. Remove it and swap in the spare 5 amp from space 35 - it's a 2 prong yet make sure you place it on the inner, or right side as you face it slot... which leaves the center hole open. Zero issues and after checking the settings it can't even get past the spin so it quits. Love it
 
Great instructions on this. It is weird you can't physically see the 08 number but you describe it well. It is a three prong fuse in slot 9. Remove it and swap in the spare 5 amp from space 35 - it's a 2 prong yet make sure you place it on the inner, or right side as you face it slot... which leaves the center hole open. Zero issues and after checking the settings it can't even get past the spin so it quits. Love it
Glad the instructions were helpful!
 
I wanted to disable the modem in my truck to guarantee it can't phone home to Ford. Consider it a privacy hack. :) It's pretty simple by pulling the fuse, but still wanted to document the process since it's a combo fuse - one fuse powering two circuits.

Of note: I did this to a 22MY truck with Sync 4. While I believe these same instructions should work for previous model years, double-check the fuse number in the owner's manual and the instructions for performing a master reset.

What it breaks
By doing this you will disable any ability for your truck to connect to Ford's servers. This means no ability for you to control or get information from your truck using the Ford Pass app on your phone in any way. No remote start from your phone, no unlocking/locking the doors from your phone, no DTCs on your phone, etc. Since I just did this tonight, and haven't actually driven the truck yet, there may be something I've missed that's broken. I'll update the thread if I find anything, but I honestly doubt there will be.

Update after driving the truck a good amount: nothing else broken that I can find other than a crossed out cloud in Ford's navigation screen. It's likely there's some functionality in there that depends on a data connection, though I don't personally use the built-in navigation so I can't give details.

If you do this before you get your Ford Pass Points from purchase (42,000 points for a gas truck, 70,000+ for a diesel truck) you may prevent yourself from getting the points. I ended up doing this after I got my points, so I can't say for sure.

What I've confirmed it doesn't break
Truck starts and runs just fine. No service engine or other warning lights illuminated on the dash. Wireless CarPlay and Bluetooth work. Satellite reception still seemed to work, though I haven't used the built-in nav since I got the truck so I didn't put much into testing it (been using CarPlay exclusively for maps). Honestly didn't know what else to check, since the fuse should be pretty limited based on the label. If there's something else you want me to check before you do this yourself, let me know.

Performing a master reset
While this part is technically unnecessary, I wanted to completely divorce my truck from Ford's servers before pulling the fuse for the modem. By performing a master reset, it de-activates your modem on Ford's servers, along with resetting all settings in the Sync system. This did not impact my settings in the gauge cluster.

Find the instructions for performing a master reset here:
Of note, once I told the truck to go ahead with the reset, it took a number of seconds before it actually did it. I started browsing around and then the screen went black. After a number more seconds, the screen came back and everything was reset.

Pulling the fuse
Again, this is specifically for a 22MY truck. If you have a different model year, double-check the fuse location for the modem to make sure you pull the right fuse.

You'll find the fuse in the fuse panel in the passenger foot-well, on the right side when facing the front of the truck. The plastic cover pops off pretty easily, though you may need to fold back or remove your floor mat to get the cover out.

Once in there, the fuses are numbered, but not otherwise labeled. Look for fuse "9" down the right side of the panel; it's 5 amps. The one fuse serves two circuits (it has 3 blades). I believe the center blade is shared power from the battery and each circuit is on either side. Circuit 8 is towards the center of the panel (left side of the fuse), circuit 9 is towards the outside (right side of the fuse).

Circuit 8 is for the modem and the one we want to kill, circuit 9 is for the "Combined Sensor Module" according to the owner's manual. I have no idea what that is even after searching online. With the fuse pulled and both circuits without power I did fire up the truck and everything seemed to be working, but I figured it would be worth restoring power to circuit 9 to isolate my change.

Fuse/circuit 35 is a spare 2 blade, 5 amp fuse. I replaced the wide, 3 blade original fuse with this one, only on the right side, leaving the inner connection for the modem empty. Presumably this restored power to the "Combined Sensor Module", though I have no real way of verifying other than the fact I probed it with a test light and the fuse had power.

While messing with things I pulled the original fuse a few different times so the plastic is pretty weak. I'm going to get a replacement for it, as well as fuse 35. Fuse 35 I'll restore as a spare in the panel and I'll keep the original replacement in the glove box should I ever need to restore power to the modem, though I don't see why I would.

How do I know it worked?
Going into Settings -> Connectivity -> Connected Vehicle Features now shows a spinner before not doing anything else. It doesn't load a page at all. Additionally, the button for Settings -> Vehicle Hotspot is disabled entirely now. Those both are a pretty solid indication to me that the modem is disabled.
it doesn't stop the little black helicopters from following you around.
 
Stingray device ? Ha the ol dirt box

Stingray's are for the bulk collection of cellular data over a short range and are frequently camped near specific towers - at least to my understanding.
Assuming proper situational awareness and a working knowledge of your locale, Helicopters, while stilling require more complex solutions, are often a manageable threat in the context of an urban environment.
 
it doesn't stop the little black helicopters from following you around.
No but it severly limits their ability to deactivate your truck.... and you know I wish it made the little weatherherks stop following us around too LOL

There seems to be a little crowd who just loves to take fun shots at the data privacy guys on any such related threads. Buzz off little helicopters.
 
No but it severly limits their ability to deactivate your truck.... and you know I wish it made the little weatherherks stop following us around too LOL

There seems to be a little crowd who just loves to take fun shots at the data privacy guys on any such related threads. Buzz off little helicopters.
touchy a bit are ya....to each their own....i could care less what fuse you pull for what. Be carful of your comments on things you know nothing about as far as weather goes my friend
 
Stingray's are for the bulk collection of cellular data over a short range and are frequently camped near specific towers - at least to my understanding.
Assuming proper situational awareness and a working knowledge of your locale, Helicopters, while stilling require more complex solutions, are often a manageable threat in the context of an urban environment.
Well if we were targeting a moving vehicle the dirt box behaves like an artificial cell tower and pings you phone. So you can track, transmit or extract data as well. It is used for targeting. But the genius' in DC gave them to law enforcement and now there is widespread domestic abuse to the point of the Justice Dept writing nasty letters to them. The good side is they catch predators like rapists etc much faster. The downside is there is not solid regulations so dudes abuse them and have gotten caught tracking ex girlfriends and wives etc.

Helo in the US is a legal hoop jump so data extraction and analysis is the first approach.

And hypothetically if a tyrannical govt wanted to lockdown society they can disable all cell, internet, all connected devices and vehicles.

Shoot check out the documentary zero days and that will blow your mind.
 
touchy a bit are ya....to each their own....i could care less what fuse you pull for what. Be carful of your comments on things you know nothing about as far as weather goes my friend
If you didn't care why post at all? If you dish it out you have to take it. Hopefully with a smile. I know a lot about weather. It's unpredictable and geoengineering is foolish. I love moderate weather too. LOL all in jest bud
 
touchy a bit are ya....to each their own....i could care less what fuse you pull for what. Be carful of your comments on things you know nothing about as far as weather goes my friend

I don't think he is... Perhaps you haven't been involved in many such threads, but whenever the topics are raised, where verifiably and factually accurate conversation is attempted, there is always one member who introduces aggressive and condescending dissent, largely fueled by nihilistic ignorance and a lack of available bandwidth to absorb the implications of the considerations... I'm not saying any of this applies to you - at all. Its just that your replies are relatively par for the course, and after a while, it becomes hard to discern a bit of light-hearted fun from a just another bad-faith interaction where all the other party seeks is a pissing match about their feelings.

Again, none of this is on you, but there's always someone who jumps in with no other goal than to drive the conversation into the dirt with mockery and ad hominem antagonism... Simply because they have been told to think it's a political consideration when literally nothing could be further from the truth.
 
Last edited:
Wasn't there a post somewhere on this forum with pictures of the fuse removal? I seem to recall someone bending a fuse blade to test the module's functionality. Anyone recall where this is? I've been searching but can't find it.
 
Install a raspberry-pi running pi-hole and block the communication between the truck and ford.
 
Wasn't there a post somewhere on this forum with pictures of the fuse removal? I seem to recall someone bending a fuse blade to test the module's functionality. Anyone recall where this is? I've been searching but can't find it.
I don't remember seeing a post with pictures of the fuse removal anywhere, though could have missed it. Don't know what you would take pictures of since it's just a fuse in a fuse box. I do think I remember someone pulling the actual cellular module out, though.

What do you mean by "bending a fuse blade to test the module's functionality"?
 
Getting closer to pulling a fuse, ford pass app keeps telling my journey is not recording and to enable in the app

Ummm no and shut up about enabling it
 
Pulled mine 4 days after picking it up. I didn't ever set the truck up in FordPass as I don't have the app but everything I want seems to be working just fine.

I do think if you are serious about privacy you would have to pass an using Android Auto as well. It is collecting data about the vehicle it's working with and reporting it somewhere. May be a mute point since the phone already knows where it is but it's still more data being voluntarily donated.
 
  • Like
Reactions: ccw
Back
Top Bottom