7.3 Godzilla Engine Noise

I had the same similar thing happen when one of my cats went out on a different vehicle. These trucks are known for having issues with the catalytic converters. Alternative, long tube headers and delete the cats or install sport cats.
 
  • Like
Reactions: Rpm
This theory makes more sense but it goes away fast. Way before you can get in to see the dealer. It happens 90% of time after towing heavy. Fine towing the same day. Leave it over night and it makes this sound. Drive it around a little and it sounds bad, then goes away completely. The dealer will just keep it for a week and say they can't replicate it.
Maybe the bolts slowly unscrewing themselves? Clackety, erosion, quits, bold backs out more, repeat? This would keep me up at night until I could pull the inspection plate off and stick a camera up there. I think I saw a post on this forum about flywheel or bellhousing bolts backing out?
 
Towed my 7000lb travel trailer this weekend. Inaugural shakedown so just towed to a spot 20 miles away. Left the next morning and truck started making the noise again but it stopped after about 10 mins. I need to bring my mechanic’s stethoscope on the next trip and crawl under and pinpoint exactly where it is coming from. My money is on the cats based on the tinny and tinkish noises.
 
Towed my 7000lb travel trailer this weekend. Inaugural shakedown so just towed to a spot 20 miles away. Left the next morning and truck started making the noise again but it stopped after about 10 mins. I need to bring my mechanic’s stethoscope on the next trip and crawl under and pinpoint exactly where it is coming from. My money is on the cats based on the tinny and tinkish noises.
Mine did it for three days after the tow before last. Then, last tow, it did it once in the morning during our camping trip for about five minutes. Towed back home and hasn't made it since.... Always go to the same place and take the same route, so....🤷
 
So it happened again. I was the original poster on this thread. Almost 20k miles later and it came back once for about 5 minutes. I pulled our camper about 50 miles. Have probably towed this same range with the same or similar camper 10 times in the past year. Same sound as the original post.
 
Someday one of us will nail down what the hell this noise is. I retire in 72 days and will have plenty of time to do nothing but lay under the truck probing for noises....
 
Been trying to get the video of my truck making the same noise as OP's since I got it back from the dealership but have been unsuccessful so I am glad to have found this thread to add to the conversation.

Only made the noise when retrieving boat at ramp. Didn't do it when launching the boat or any other time for that matter. Started August 2024. Late 2024 service department visit resulted in no action as they could not replicate the noise. Returned to service department April 2025 after four consecutive instances of noise making while retrieving boat. Dealership still could not replicate. After two months I finally badgered owner and GM into getting Ford involved. Field Service Engineer had them try different things (cut open oil filter then remove starter/inspect things) only to ultimately approve replacing torque converter and an associated bracket. Service invoice attached as well. Over $3,500 in parts and no telling how much labor to replace with the same parts that failed. (Converter and bracket part numbers come up for 20-22 models only.) Truck in shop for over 12 weeks. Can't say I am particularly happy with the "alternative engineering" listed on the invoice but maybe it will "cure" the problem. Just hope I am not in for this again. Luckily I have a 7 year service contract in place.

F-250 transmission work final redacted 1.webp


F-250 transmission work final redacted 2.webp


F-250 transmission work final redacted 3.webp
 
Been trying to get the video of my truck making the same noise as OP's since I got it back from the dealership but have been unsuccessful so I am glad to have found this thread to add to the conversation.

Only made the noise when retrieving boat at ramp. Didn't do it when launching the boat or any other time for that matter. Started August 2024. Late 2024 service department visit resulted in no action as they could not replicate the noise. Returned to service department April 2025 after four consecutive instances of noise making while retrieving boat. Dealership still could not replicate. After two months I finally badgered owner and GM into getting Ford involved. Field Service Engineer had them try different things (cut open oil filter then remove starter/inspect things) only to ultimately approve replacing torque converter and an associated bracket. Service invoice attached as well. Over $3,500 in parts and no telling how much labor to replace with the same parts that failed. (Converter and bracket part numbers come up for 20-22 models only.) Truck in shop for over 12 weeks. Can't say I am particularly happy with the "alternative engineering" listed on the invoice but maybe it will "cure" the problem. Just hope I am not in for this again. Luckily I have a 7 year service contract in place.
Thanks for posting this. It's good to have some official documentation whenever I get to the dealer. I'm very surprised they actually wrote that part down about modifying the parts!
 
Been trying to get the video of my truck making the same noise as OP's since I got it back from the dealership but have been unsuccessful so I am glad to have found this thread to add to the conversation.

Only made the noise when retrieving boat at ramp. Didn't do it when launching the boat or any other time for that matter. Started August 2024. Late 2024 service department visit resulted in no action as they could not replicate the noise. Returned to service department April 2025 after four consecutive instances of noise making while retrieving boat. Dealership still could not replicate. After two months I finally badgered owner and GM into getting Ford involved. Field Service Engineer had them try different things (cut open oil filter then remove starter/inspect things) only to ultimately approve replacing torque converter and an associated bracket. Service invoice attached as well. Over $3,500 in parts and no telling how much labor to replace with the same parts that failed. (Converter and bracket part numbers come up for 20-22 models only.) Truck in shop for over 12 weeks. Can't say I am particularly happy with the "alternative engineering" listed on the invoice but maybe it will "cure" the problem. Just hope I am not in for this again. Luckily I have a 7 year service contract in place.

View attachment 218096

View attachment 218097

View attachment 218098
Probably too early to ask but, has it come back? Mine just did it this morning and I haven't towed since July 4th weekend...
Also, has anyone here removed whatever inspection plate there is and looked inside yet? Letting mine cool down and going to try to locate and remove mine today. If the rain holds off....
 
Left my dang snake camera in my other truck so couldn't get any good pictures. Didn't notice any metal shavings or anything when I opened the inspection plate but doesn't mean there isn't any contact going on 🤷 will try again when I get my camera back
 
Any updates on these issues as they persist in other forums as well with no answers other than the one posted above ? The above answer may be the answer we are all looking for but I would like to see a few more fixed with this solution to be sure. My truck has 7700 miles and has done this after every long tow with my 6500 lb camper. Got under it this morning when stopped after leaving the campsite and it is definitely not the catalytic converters. Sounds like noise is coming from the engine or tranny. Maybe one day myself or someone else will drop their truck off at the dealer after returning the trailer home so the dealer can cold start it to replicate the sound.
 
Happened again today. Same drive as a few weeks back but this time only towing the boat. Inclines seems to be a common theme when it starts. Goes away shortly after it gets warmed up and a few miles on it.

Can someone post a picture of the inspection plate that is being removed?
 
1000003484.webp

This is the only picture I have of it. Well, it's been removed in this pic. Ended up not having my snake camera nearby so I tried to get a view with just my phone. 🤷
 
Add my 2022 Long Bed XLT to the list. Towed the camper, 7k lbs for a out 120 miles, for the weekend and when packing up to leave I started to hear this exact noise. It was fairly quiet at first but then progressed to very pronounced. I had been parked on a slight incline and at one point moved the truck a few feet to level ground and the sound became much quieter. No issues on the drive home and the sound was gone during the couple of stops I made a long the way. For now I guess I'll just chalk it up to a quirk and avoid idling on inclines...
 
Ive dealt with this on a few of my trucks, my 2024 Tremor does this occasionally. I am certain it is heat shielding around the cats/exhaust rattling. Start proving that shielding with a contact surface that doesnt resonate while its running and rattling and it will stop when you touch the culprit part.
That's my issue anyways, hopefully yall get smooth resolutions with your noises
 
The sound at the beginning of the video is the sound I have and seems like the rest y'all are having. Only thing is, ours is only after a tow? Seems like it would be all the time if it were the oil pump gear but the sound is identical. IDK
 
It seems like there are a few different clicking or tapping sounds. Mine sounded nothing like the video just posted by @Bluezilla. Sounded pretty much exactly like the video early in this thread by @Blade420Play🔪 . More of a cyclical tapping sound, like the Spoonman was under my truck tapping out a rhythm. RIP Chris Cornell.
 
It seems like there are a few different clicking or tapping sounds. Mine sounded nothing like the video just posted by @Bluezilla. Sounded pretty much exactly like the video early in this thread by @Blade420Play🔪 . More of a cyclical tapping sound, like the Spoonman was under my truck tapping out a rhythm. RIP Chris Cornell.
Mine was similar to Blade420. But mine was noticeable only around 2200-2800. At first only with colder temps. Then it became more and more frequent with warmer temps. Always around 2200-2800rpm. More common id say on incline or towing. But Honestly seemed like an exhaust or manifold leak. Well last week I got a misfire code and decided to get to the dealer. Lifter failure at 91,000. And slated for a new motor. Allegedly dealer said this is very common for high idle service trucks and Amazon trucks that run the 7.3 Godzilla. Not my situation. And… Unfortunately mine not under warranty so out of pocket for me.
 
Last edited:
Back
Top Bottom