4 BD squadrons behind 2026 grill w/pics

4LowLance

Tremor Buff
Joined
Dec 30, 2025
Messages
46
Reaction Points
129
Location
SoCal
Current Ride #1
1995 f150, 1997 f250, 2014 f250, 2004 jeep rubicon
I really like keeping my new 2026 f350 tremor low profile. I'm a little picky about lights and their patterns. I like my driving lights up a little high, so I was not interested in driving lights in the fog pockets.

My goal is a good long range beam to shine down long highways with minimal flood characteristics. I want the highway 1/4 mile away lit up, not the trees and shoulders.

The Factory Aftermarket front tube mount looks so so good, but I just didn't want something so visible on my work truck.

I finally got a set of Baja Designs squadron pros to mount on the A pillar. I tried both the spot and combo lens but I didn't like the glare off the hood with either. I do believe another brand of light with a tighter spot pattern might have less glare. the BD lights have a fair amount of "free light" even in spot pattern.

I haven't seen any off the shelf options for behind the grill for this truck. For good reason, there isn't much room.

After taking some dimensions with the grill on I was convinced it would work. I ordered another set of squadrons, Racer spots this time.

I cleared my day, got a 12 pack on ice, put the Baja 1000 live stream on the garage TV and got to work.

It was actually very simple. 2 pieces of 1" steel angle with a little notching and 1 tab welded on. Its bolted to the plastic structure behind the grill and is very strong.

Here is my initial test fit with some zip ties and scrap. I did this to make sure it all cleared the grill structure.

The grill is big and complex but removal was surprisingly easy.
 

Attachments

  • IMG_5626.webp
    IMG_5626.webp
    280.5 KB · Views: 24
A coat of paint while I watched Alan Ampudia and Andy McMillin fight to a 2AM finish in Cabo.
 

Attachments

  • IMG_5632.webp
    IMG_5632.webp
    485.9 KB · Views: 17
  • IMG_5633.webp
    IMG_5633.webp
    285 KB · Views: 15
  • IMG_5634.webp
    IMG_5634.webp
    322.9 KB · Views: 16
  • IMG_5635.webp
    IMG_5635.webp
    389.3 KB · Views: 17
  • IMG_5636.webp
    IMG_5636.webp
    227 KB · Views: 18
  • IMG_5641.webp
    IMG_5641.webp
    367.8 KB · Views: 17
got it all buttoned up today. I'm really happy with the final result.

I think it needs 1 more pair just for a balanced aesthetic. I really like the tight pattern of the racer spot. I should have mocked one up on the a pillar just to see how much glare I got.
 

Attachments

  • IMG_5645.webp
    IMG_5645.webp
    209.2 KB · Views: 40
  • IMG_5652.webp
    IMG_5652.webp
    90.3 KB · Views: 39
  • IMG_5654.webp
    IMG_5654.webp
    109.3 KB · Views: 39
I agree 100% with all your thoughts and reasoning for installing it that way. I'm going to have to copy that.
 
Back
Top Bottom