Up-fitter switches added to unit

[DRBaker]

I am wondering if there is any way to install a factory of fitter switch and unit into my unit that did not come with the up-fitter switches

 

[Craiger22]

https://fb.watch/Kvx1uhYEUD

 

[Craiger22]

I want to do the same

 

[NEOHIO]

I watched his video the other day. He lists the 3 different part numbers you need to order. He did mention some trucks already have 1 part factory installed. So inspect the truck before ordering.

Find a vin that is built to same trim as yours, lariat, xlt premium, etc. Then send that to a dealer for verification. So many options are part of that console.

 

[trmrzla]

I did it in my '22, pretty straight forward

 

[modified]

I am wondering if there is any way to install a factory of fitter switch and unit into my unit that did not come with the up-fitter switches

Welcome! Here some threads worth checking out:

23+ 7.3L Upfitter Switch Installation

Summary: This post is for those who purchased a 23+ Super Duty without upfitter switches, and would like to add them. For reference, a 2025 F350 7.3L XLT Premium was used in this post. I didn't see a lot of information out there on how to do this on a 23+. I hope this will help anyone else...

www.fordtremor.com

Adding Upfitter Switches for $0...

Well almost zero dollars. I used a few posts and videos from other people, I really appreciate their work to get me started. To install Upfitter Switches after the fact you need a couple things: The upfitter relay box, the switches, appropriate harness for your overhead console and a overhead...

www.fordtremor.com

Adding Upfitter Switches

I am looking to add the OEM upfitter switches to my 2023 F-250 XLT Tremor (VIN 1FT8W2BN5PED58567). I know I could do a switch pro, but I like OEM fit. I have been trying to use the VIN to look up the as-built parts as reference, then figure out which part #s are required to add the switches...

www.fordtremor.com

 

[Nick22]

To piggyback on this, is there anything benefit of going with the Spod Bantam X over OEM switches?