Tremors and Tractors

I loaded my tractor up today to take it from our ranch to our home which is about 30 miles. Going to do some cedar clearing at our home.

View attachment 36054

Nice! That looks like a heavy load. What's the total weight of all that?
 
Nice! That looks like a heavy load. What's the total weight of all that?
Total weight of my trailer, tractor with the bucket on the FEL and backhoe is 10980 lb. I also have a box blade and grapple on the trailer for this load so it's probably close to 12000 lb. My trailer is a 14K so I'm almost maxed out.

My Weigh Safe hitch showed the tongue weight right at 1500 lb.
 
Edit: the "double-nickel limit" goes back to a Federal Law from 1973 passed after the Arab Oil Embargo. 55 mph is the most efficient speed for most vehicles (not Zamboni's, obviously), balancing the inherent efficiency of internal combustion engines with viscous drag from airflow.

I read your statement about logic, and your logic actually is pretty sound (doing 55 while towing is good, and you can go a little faster un-loaded). It is based on a concept similar to terminal velocity. The speed at which you fall is an equilibrium between two forces:

F-g - gravity's pull on your crazy self (who the F^*$ jumps out of a perfectly good airplane?) and
F-Drag - the drag cause by moving you through the atmosphere.

Good Video:


For a vehicle driving down the highway (falling horizontally?), we balance energy transfer from the engine to the wheels to maintain speed and push the truck through the air. After ~55mph we see diminishing returns on fuel economy, and we are limited by engine efficiency and drag coefficients (*math happens*).

Increasing your speed above 55mph causes you to burn more fuel due to the air drag force overtaking your trucks ability to efficiently propel you forward.

Fun reference:
Right, the critical part being the effect of velocity squared on drag. Raising your speed from 55 to 60 is ~9% increase in speed but a ~19% increase in drag. When you reach ~77 you have doubled your drag vs. 55.
 
Right, the critical part being the effect of velocity squared on drag. Raising your speed from 55 to 60 is ~9% increase in speed but a ~19% increase in drag. When you reach ~77 you have doubled your drag vs. 55.
And yet these trucks have the power to effortlessly tow at 75-80 mph with a decent load and go up and down grades with little fanfare. I did notice that I use a lot of DEF, which probably corresponds to the amount of fuel being consumed. I have not really paid close enough attention, but I'd guess while towing in the 20k gross combined range, that I am using a gallon of DEF in less than 500 miles. That's just some trivia.

As far as drag, I used to own a C6 Z06. They would officially do 198 mph stock with 505 engine HP. They would not pull to redline (219 mph) in 5th gear due to lack of HP. Mine had a cam and tune and had 525 at the wheels, so probably 100+ HP gain over the stock engine. I never had a safe place (or the nerve) to try it, but at those speeds, I was figuring that the extra HP would probably only get me 5-7 MPH in terminal velocity due to drag. More trivia.
 
0FE1EAF2-E7F3-47E2-94BB-B13D018D2879.webp

Food plot time!!
 
Right, the critical part being the effect of velocity squared on drag. Raising your speed from 55 to 60 is ~9% increase in speed but a ~19% increase in drag. When you reach ~77 you have doubled your drag vs. 55.
Love it.

Also, here's a good example of a 100% increase in drag:


(never understood the song as a young'un, until I re-listened to recently with the kids and went "oh...." then changed to the next tune quick!).
 
There is also the root grapple which allows more cutting in to the ground with the tilt arms retracted position vs the skeleton style with a grapple lid. Does great ripping out smaller brush and grabbing trees with smaller loaders. The one I had had a lower tooth count to keep weight down so wasn’t the greatest at picking up smaller stuff. It was around the weight of the bucket so had great capacity for bigger trees. I would recommend a tighter tine spacing if not loader capacity limited in the root style grapple though.
View attachment 34570

I ended up taking your recommendation and ordering a 60” root rake “clam grapple” from Skid Steer Attachments Depot.


~$1800 delivered to CA from AL in about a week.

I liked the design from a functional standpoint and couldn’t beat that price.

My local dealer had this comparable unit from Construction Attachments but wanted $4200 for it.

https://www.constructionattachments...=/catalog/grapple-attachments/tractor-loaders

There’s some value engineering on the ProWorks (no zerks on the hinges) but I’ll be lucky to put a couple hundred hours on it in my lifetime so wasn’t sweating that.

Welds look good and the powder coat seems decent. Came with a bit of scrapes and rust like it had been sitting in a lot for awhile, but the paint is fine.

I’ve got to find the time to put it to good use. If it continues to deliver I’ll buy more attachments from this company in the future.
 
Last edited:
TREMOR brought home another tractor today…😁View attachment 37709
Looks great. I like the way you are resting the bucket on that timber, that is a great solution. Just wondering though, if you had curled the bucket fully dumped, would it have fit with the doors closed? Another trick that I have used if I don't want the bucket up for some reason, is to disconnect the bucket and slide it against the headboard of the trailer (bucket facing rearward) and it takes hardly any room. Just some thoughts, not criticisms. That looks like a nice heavy-duty 14k trailer.
 
I ended up taking your recommendation and ordering a 60” root rake “clam grapple” from Skid Steer Attachments Depot.


~$1800 delivered to CA from AL in about a week.

I liked the design from a functional standpoint and couldn’t beat that price.

My local dealer had this comparable unit from Construction Attachments but wanted $4200 for it.

I will predict that you will wonder how you ever got along without the grapple.
 
I ended up taking your recommendation and ordering a 60” root rake “clam grapple” from Skid Steer Attachments Depot.


~$1800 delivered to CA from AL in about a week.

I liked the design from a functional standpoint and couldn’t beat that price.

My local dealer had this comparable unit from Construction Attachments but wanted $4200 for it.

https://www.constructionattachments...=/catalog/grapple-attachments/tractor-loaders

There’s some value engineering on the ProWorks (no zerks on the hinges) but I’ll be lucky to put a couple hundred hours on it in my lifetime so wasn’t sweating that.

Welds look good and the powder coat seems decent. Came with a bit of scrapes and rust like it had been sitting in a lot for awhile, but the paint is fine.

I’ve got to find the time to put it to good use. If it continues to deliver I’ll buy more attachments from this company in the future.
That's a good price at $1800 delivered and it looks nice in the picture. For comparison, we are a tractor business in California, paying California wages, taxes, and dealing with plenty of regulations, and our Terra Force brand (South Korea made - so good stuff) grapples are about $2400 retail. $4200 seems like a lot for the Construction Attachments grapple unless it is a hot rod one rated for a large skid-steer, which are way heavier and get in the $4k plus range quickly.

Prices are going up. It used to cost about $4000 and take 16-20 days to ship a 40' container across the pond from Korea or Japan to our door. Right now, it is closer to $20k and 60-90 days. We just received a full container last Friday, and freight increases combined with raw material costs have driven prices up noticeably on most implements.

Regarding some scrapes and rust, that is pretty common as we try to cram as much material on a truck or in a container as possible to save freight. Fortunately, it doesn't matter much on a bucket or grapple or box scraper that is going to be put to work in the dirt and rocks right away anyway.

Enough rambling, I better get back to work.
 
Looks great. I like the way you are resting the bucket on that timber, that is a great solution. Just wondering though, if you had curled the bucket fully dumped, would it have fit with the doors closed? Another trick that I have used if I don't want the bucket up for some reason, is to disconnect the bucket and slide it against the headboard of the trailer (bucket facing rearward) and it takes hardly any room. Just some thoughts, not criticisms. That looks like a nice heavy-duty 14k trailer.
The box scraper is in front of the tractor at the rear of the trailer. Tongue weight was just right as loaded. The weigh safe hitch is the bomb. 600 miles of clear sailing. Speeding most of the way at about 72 mph, it could not have ridden/towed better. 13.1 mpg average. 👊. TREMOR is badass!!!
 
TREMOR brought home another tractor today…😁

Looks great. I like the way you are resting the bucket on that timber, that is a great solution. Just wondering though, if you had curled the bucket fully dumped, would it have fit with the doors closed? Another trick that I have used if I don't want the bucket up for some reason, is to disconnect the bucket and slide it against the headboard of the trailer (bucket facing rearward) and it takes hardly any room. Just some thoughts, not criticisms. That looks like a nice heavy-duty 14k trailer.

I feel like you two should start a YouTube channel together about creative trailer loading. That timber bucket rest almost blew my mind as much as that trailer with 40 implements on it a few pages back!
 
I feel like you two should start a YouTube channel together about creative trailer loading. That timber bucket rest almost blew my mind as much as that trailer with 40 implements on it a few pages back!
I have been talking notes on the creative loading, videos would be great. Hopefully will be able to post some more creativity soon.
 
The box scraper is in front of the tractor at the rear of the trailer. Tongue weight was just right as loaded. The weigh safe hitch is the bomb. 600 miles of clear sailing. Speeding most of the way at about 72 mph, it could not have ridden/towed better. 13.1 mpg average. 👊. TREMOR is badass!!!
Perfect. I've hauled hundreds if not thousands of tractor packages, and I admire a load like yours that is tidy, safe, and balanced.
 
Tractor loading entertainment for you all. I think the statute of limitations for overloading my 2006 Duramax is well past, so I can post this picture! This was back in 2007. 4 tractors, plus some implements. I sold all of them in the same area to different customers about 150 miles away, so it was worth spending a couple of hours loading. 20 foot flat plus 5-foot dove. I was probably right at 20k lbs on the tandem duals on the trailer with that load. Note the flip-up ramps had to be removed and hauled in the bed of the pickup. Lots of tricks on that load. That was a few trucks ago, it was a 6-speed manual Duramax, which is nothing special, but sort of rare.

My current gooseneck is a 32' with a hydraulic dovetail and I do pull it occasionally with the Tremor.

big load.webp
 
Tractor loading entertainment for you all. I think the statute of limitations for overloading my 2006 Duramax is well past, so I can post this picture! This was back in 2007. 4 tractors, plus some implements. I sold all of them in the same area to different customers about 150 miles away, so it was worth spending a couple of hours loading. 20 foot flat plus 5-foot dove. I was probably right at 20k lbs on the tandem duals on the trailer with that load. Note the flip-up ramps had to be removed and hauled in the bed of the pickup. Lots of tricks on that load. That was a few trucks ago, it was a 6-speed manual Duramax, which is nothing special, but sort of rare.

My current gooseneck is a 32' with a hydraulic dovetail and I do pull it occasionally with the Tremor.

View attachment 37774
Wow
 
Back
Top Bottom