Spare tire hack

I use a standard 3/8" x 24" long extension without having to dig out the tire tools. Can use a manual or power ratchet.

h3F94la.jpeg
I too bought a long extension for this purpose. I did have a terrible experience using a power ratchet tho. The winch cable birds-nested up in there and jammed. I had to take the whole thing apart. It was such a pain I think I will do it manually from now on.
 
I think @BroncOh mentioned before that once you start driving it auto recalibrates.
Yep, I haven't had to do anything with mine... Just perform the next sequence of the 5-tire rotation and each active tire registers appropriately and automatically.
 
Off topic here, but one of the first things I did was flip my spare upside down so the valve stem faces out. I also align the stem toward the rear so it is most easily accessible. Amy time I touch an a tire gauge to any tire I check the spare. I have always done this with all of my trucks. I do not know why the factories seem to always make it hard to check the spare air.

In the late 1970's I worked at a customer service oriented tire store. We always checked the air in the spare on the cars we serviced. I would say about half of the spares that I checked had less than 10 PSI, and many had zero.
No need to "flip the spare", for $5 get an 8.25" extension from Amazon (https://www.amazon.com/dp/B0C98SMWPP?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1). Screw it on and face it to the ground. Now you can check the air pressure any time.
 
Reading through this, it made me realize I have never lowered my spare or checked the air pressure. So I went to do that, and I either have the wrong key to access the spare, or it may be seized. My 2022 has 31k miles on it, and it has been Krown sprayed before both winters. Is this the right key? If not, what does it look like?

IMG_1129.webp
 
Reading through this, it made me realize I have never lowered my spare or checked the air pressure. So I went to do that, and I either have the wrong key to access the spare, or it may be seized. My 2022 has 31k miles on it, and it has been Krown sprayed before both winters. Is this the right key? If not, what does it look like?

View attachment 170312
Try those keys on your box link tie downs in your bed.
 
Until the cheap Chinese hose rots and cracks and lets all of the air out of your spare tire. That just looks like it is adding a couple of more failure points. I will pass.
I've been using the cheap (most likely Chinese) extensions for over 30 years on every one of my trucks and have never had a problem.
 
I carry a 1/2 extension that has a 3/8 end . Originally bought for swapping transmissions, and it fits the spare winch, and goes under the seat fine

I also carry a 1/2 drive 20v impact for lugnuts

Screenshot_20250703-124513.webp
 
@Canyon Trekker I was at the service dept today and speaking with a mechanic about several things. We got on the topic of the spare and he also uses the 14mm socket method:

View attachment 216062
My only complaint with using a socket is you still have to dig out the tools from under the seat...I usually have an extension, sockets, impact, breaker bar, ect in the bed in tool box...jack is easy enough to get to b/c the back tilts down...the pouch tools are buried under my recovery gear under the back seat...I have had to swap 3 tires all on unlevel ground on FS roads with a shitpot of gear piled in the back seat....One those times I was fortunate enough it was also raining... :ROFLMAO:
 
I carry a 1/2 extension that has a 3/8 end . Originally bought for swapping transmissions, and it fits the spare winch, and goes under the seat fine

I also carry a 1/2 drive 20v impact for lugnuts

View attachment 216064
this is me, sits in a tote in the bed with the other "bed" stuff. Under my bakflip at the back of the bed for first easy grabs.
 
I carry a 1/2 extension that has a 3/8 end . Originally bought for swapping transmissions, and it fits the spare winch, and goes under the seat fine

I also carry a 1/2 drive 20v impact for lugnuts

View attachment 216064
Me too
 
I recently added the 3/8” x 30” extension. Like others I carry it and the battery powered ratchet in the bed of the truck. Nothing like needing the spare tire tools when you’re loaded for camping. Easy, fast access is the priority. Also I felt a 30” extension would be more useful in the overall tool arsenal than another 14mm socket. 😆 All great information in this thread. 🇺🇸👏👏
 
Back
Top Bottom