S&B 60 gallon tank question

I wish the process this tech did was published somewhere. This seems to be a unicorn. You are the first person I know of that had the DTE adjusted properly to 60 gallons on a 23+ in the Ford computer.
That’s what I was thinking. This needs to be recorded for science.

If there is anyone near the Panhandle of FL wanting to experiment (of sorts) I got the Mongoose cable and FDRS is cheap for two days of use. We can dig into the systems to see what we can find. :geek: :geek: :geek: :geek:

:cool::cool:☕☕🇺🇲🇺🇲🇺🇲🇺🇲
 
I don’t see why it would matter, I don’t think the software knows what tank is in the truck, sure it wouldn’t be the 60 gallons, but it would get us closer. Something to think about I suppose.
Exactly. It's only a $100 so it's worth a shot.
 
It's going to be forscan and it's going to set to 48 gallons which is the max that comes from the factory and is in the interface. There isn't a Ford tool.

Mine was installed at a dealership so they had access to everything.

What bothers me is Titan can be done via ODB2 port and is a 1 time update. I would have hoped S&B would have gone that route.

I agree that the module isn't needed as long as you know the tank will read full for the first 12 gallons and the DTE will be about 90% accurate considering there are 8 gallons in the tank when the gauge shows empty and the first 12 don't register.
I have the Titan and did the OBD2 port tool. Worked fine. Too bad it’s supposedly VIN specific or I would mail it to you. I will reach out to them to confirm again. We have a bunch of their tanks on our fleet.
 
Back
Top Bottom