OBD exclusive - Baja Designs 7 XL80 Linkable light bar

This is badass! Could you wiring/harness be setup for the middle 3 lights with one Aux switch, the next outer 2 to a different Aux switch, and the outer most 2 for a third Aux switch ? So it could be used by 3 aux switches based on the brightness you want/need?
 
This is badass! Could you wiring/harness be setup for the middle 3 lights with one Aux switch, the next outer 2 to a different Aux switch, and the outer most 2 for a third Aux switch ? So it could be used by 3 aux switches based on the brightness you want/need?
Thanks!

The current wiring harness only supports the entire bar being controlled as a single unit. It will allow you to use an aftermarket controller (provided its rated for the amperage and has the feature) which would give you the ability to dim the entire lightbar.

However, if you want something different, reach out. I'll make it happen.
 
Sweet, thanks! I was thinking of the idea of using 3 harness's like you would use for a pair of XL80's so you could have a graduated brightness run by factory aux switches.

*looking for coins in the couch and may sell my BD setup to replace them all with this...:unsure:
 
Being linkable, would be cool if it could be sold as smaller functional configurations so people could customize the setup while building out the full bar over time 👍.

This might already be setup like that haha... I haven't looked and still on first coffee today 😴😜
 
Ok - I finally had a chance to get back out to the desert and take some pics and video with the new light bar.

Here are the comparison shots between the two light bars. Both pics are from the same spot, about three months apart.

Pic number 1 is the XL Pro Linkable Light Bar - 32,200 Lumens

Pic number 2 is the @OmahaBravo custom XL 80 linkable light bar - 63,154 Lumens

The pictures speak for themselves.

This bar lights up the road for at least 1/4 mile ahead.


Linkable XL Pro Light Throw.webp



Linkable XL 80 Light Throw.webp
 
Last edited:
Are we gonna get pics/vids of it at night?
I have the XL Linkable Sport and this is over 2x the output. The difference is ridiculous. When we compared the two, I even added all of my other front lights into the mix (2x XL80, 2x S2 pro, 2x S1, and 2x Squadron Pro) and it still couldn't come close.

Pic may not fully do it justice.

@OmahaBravo - I may have dashcam footage I can pull to get some screen shots. I'll take a look.
 
Ok - I finally had a chance to get back out to the desert and take some pics and video with the new light bar.

Here are the comparison shots between the two light bars. Both pics are from the same spot, about three months apart.

Pic number 1 is the XL Pro Linkable Light Bar - 32,200 Lumens

Pic number 2 is the @OmahaBravo custom XL 80 linkable light bar - 63,154 Lumens

The pictures speak for themselves.

This bar lights up the road for at least 1/4 mile ahead.


View attachment 261798


View attachment 261799
Dang, you can dry a wet road as you drive!
 
So comparing the pics it seems the light distance forward is pretty similar, but what you really gain with the XL80's is a massive amount of more overall forward light, along with a significant amount of 'ditch lighting' included.

Thanks @Toxophilite for the shots!
 
So comparing the pics it seems the light distance forward is pretty similar, but what you really gain with the XL80's is a massive amount of more overall forward light, along with a significant amount of 'ditch lighting' included.

Thanks @Toxophilite for the shots!
Agree on the side light, but there is a noticeable difference in distance as well.

The road curves to the right several hundred yards ahead, and you can really see how much better the trees ahead are lit up right at the bend.

When I installed this bar, I maxed out the curve as much as possible to match the profile of the bumper, this created a more even arc of light being thrown from the front.

I have some video with all of the lights on, It really shows the full 360° coverage. I will post that soon.
 
Last edited:
Ok - I finally had a chance to get back out to the desert and take some pics and video with the new light bar.

Here are the comparison shots between the two light bars. Both pics are from the same spot, about three months apart.

Pic number 1 is the XL Pro Linkable Light Bar - 32,200 Lumens

Pic number 2 is the @OmahaBravo custom XL 80 linkable light bar - 63,154 Lumens

The pictures speak for themselves.

This bar lights up the road for at least 1/4 mile ahead.


View attachment 261798


View attachment 261799
This is pretty incredible, although having seen it in person, i'm not terribly surprised.

If anyone's remotely interested in this light bar... make sure you're a forum member and check out the discount I'm currently running on it ;)
 
@Toxophilite @OmahaBravo hey guys how is the light scatter at night? Definitely awesome brightness but, I know with some crazy bright lighting it reflects HARD off everything and can give that "snow blind" kinda effect driving... would you find these cause that same issue (even ambers) or are they angled enough to not have that effect? - basically high beaming yourself haha.

I found it happens with bright headlights even on road signs or reflective surfaces like rock faces or if your out in a field of tall grass etc...

More light doesn't always mean better visibility! though.. this setup certainly has my attention for future bad financial choices haha!

If this has already been asked my apologies - felt it was worth the inquiry.
 
My bar has 2 corner lenses on the ends and 5 driving combo lenses in the center, all amber (no spot lenses). These disperse the light very well. In addition, I curved the bar as much as possible to get a nice radius of light and match the curve of the front bumper. With my set up, I do not get any of the high reflection issues. I know what you are talking about, and I could see that happening with clear spot lenses, especially if all 7 lights are aimed straight ahead.
 
@Aaron24F350 Toxophilite is also running all amber lenses. This will greatly help with that 'washing out' look you inevitably get with having a lot of light in a given area.
 
We did a setup like this for a customer's Raptor R back in May 2025 with 8 XL80s. We had to run two separate harnesses because the amperage was so high, and the client wanted the wing lights on individual circuits.

At the time it was the only street legal vehicle Baja Designs had seen other than Baja 1000 Racer BJ Baldwin, but even BJ didnt have XL80s ;)

Nice to have a Super duty variant @OmahaBravo. Big money but big output!

1784675281831.webp
 
We did a setup like this for a customer's Raptor R back in May 2025 with 8 XL80s. We had to run two separate harnesses because the amperage was so high, and the client wanted the wing lights on individual circuits.

At the time it was the only street legal vehicle Baja Designs had seen other than Baja 1000 Racer BJ Baldwin, but even BJ didnt have XL80s ;)

Nice to have a Super duty variant @OmahaBravo. Big money but big output!

View attachment 263072
🤘🤘🤘 Thats awesome!

When i was working with my Baja Designs rep, he told me others have made these. Not surprised yall have installed one (or more) seeing the custom work yall've done. My goal was to just make something turnkey.

We took all the energy that would be consumed by AI answering "what size wire do i need" and packed it into this kit. 💪 :cool:
 
🤘🤘🤘 Thats awesome!

When i was working with my Baja Designs rep, he told me others have made these. Not surprised yall have installed one (or more) seeing the custom work yall've done. My goal was to just make something turnkey.

We took all the energy that would be consumed by AI answering "what size wire do i need" and packed it into this kit. 💪 :cool:
Heck ya. Turn key is the move if you have the time to put it in upfront. Well done!

We definitely had some trial and error.. I think we ended up with three harnesses maybe so that we could handle the couple circuits.

God speed my friend!
 
Screenshot 2026-11-16 at 4.55.24 PM.webpScreenshot 2026-11-16 at 4.55.50 PM.webpScreenshot 2026-11-16 at 4.56.06 PM.webpScreenshot 2026-11-16 at 4.56.12 PM.webp

XL80 Light Bar installed today! Replaced my Baja Designs 40 inch curved onx6.
Onx6 40 inch - 39k lumens
XL80 x 7 - 63K lumes
So quite the increase lol and it is very noticeable!! I like the look of the individual pods as well, over the bar. Deer won't stand a chance in the northeast mountains this winter. We snowboard until 9 pm over here so it's needed for my 2+ hour drive home on some nasty backroads.

Installation took just under 2 hours from start to finish (I was working from home today so had to check emails). Straightforward and pretty easy all things considered. Wired right up to my aux beam switch panel and all the wires were well long enough - the blaze off-road stuff is top notch. I am also impressed that there's no wobble/vibration/shaking to the bracket/lights. Solid as can be going over bumps in the road.

10/10 - happy as can be!
 
Back
Top Bottom