Dethloff Mfg Intro - Armor, Bumpers & Utility Mods coming to Ford SuperDutys

How about we just do full under carriage protection like this. .

IMG_1476.webp
 
MDethloff said:
I would be happy to adjust the price by one extra ‘0’

Please swipe here, sir 😂
Click to expand...
As far as I'm concerned, you're welcome to add as many zeros after the decimal point as necessary. Heck, even add some commas. :ROFLMAO:
 
We've got final test parts in production, I should be able to get test fits in late next week! I made a few alterations that'll now allow the skid plate to work with aftermarket deep oil pans and give a little more breathing space from some exhaust components that we found varied more than expected from truck to truck.

I'm pumped to get these out. A couple guys have asked about availability before Moab, so I'm planning to launch a small batch for guys attending the event, as long as the test fits all go as planned 🤟
 
MDethloff said:
A couple guys have asked about availability before Moab, so I'm planning to launch a small batch for guys attending the event
Click to expand...
1787337952643.webp
 
MDethloff said:
We've got final test parts in production, I should be able to get test fits in late next week! I made a few alterations that'll now allow the skid plate to work with aftermarket deep oil pans and give a little more breathing space from some exhaust components that we found varied more than expected from truck to truck.

I'm pumped to get these out. A couple guys have asked about availability before Moab, so I'm planning to launch a small batch for guys attending the event, as long as the test fits all go as planned 🤟
Click to expand...


So show up a few days early with the credit card is what i'm reading here :)
 
gsea said:
So.... when am I bringing my truck over for you to start developing this for the Super Duties? Tomorrow?
Click to expand...
Ha I was assembling a couple bumper drawer systems when you sent that! I’ve been playing with a design for a front bumper that I’m really liking… I think I want to do that and then do the rear 🤟
 
FuelTankReInforcedSkidPlt said:
So show up a few days early with the credit card is what i'm reading here :)
Click to expand...
I’m trying to get everything ready in time that I could ship them to everybody with time to install before leaving for the trip, but the timeline is obviously TIGHT at this point. We’ve also got a baby coming around the start of October 🤪 If somehow everything aligns, I’m going to try and run down to Moab just to say hi to everybody and then split back home. I’d love to be there for all the trails but that’s just how it is this year.
 
FuelTankReInforcedSkidPlt said:
Rush Valley appears 4 hours from moab, the savings of not shipping I'm sure would pay for the fuel.
Click to expand...
If I can come down I will, but there’s a good chance kiddo will come early and I won’t be able to make it, so I don’t want to bank on that. Also installing skid plates in the dirt isn’t super fun 😂
 
IMG_7766.webp
IMG_7771.webp


We’re there.

We made lots of small tweaks to this iteration, and fit & function with the updates are spot on! I took a vid but it’s too much to upload here. These are right where we want them - we’ll be launching our HD engine/trans and transfer case skids, and rear shock guards.

I’ve got another test fit on Monday morning, and I’d like to check the exhaust on the 17-19’s, but it looks like we are golden for all 2017-26 trucks, with all powertrains. We were able to accommodate a lot of space for aftermarket oil pans with the update; there’s probably some that are too big but we should be able to fit most of them.

I’ve had several guys that are going to Moab ask me if we could have these skid plates ready before the event. I have been putting in a lot of hours to see if we could make it happen, and at this point I believe we can say YES to for 2020-26 trucks, and maybe for 17-19.

*If you’re going to moab* and are interested in a skid plate package, please message me right away. I’ll want to chat with you about your truck. I’m planning to make a small production run for you guys, so we can get them to you in time. Otherwise we’ll have our regular public launch around next weekend.

We just launched the new site and I’m building out the new part pages, I might have that all live tonight.

dethloffmfg.com

Thanks guys!
Marcus

IMG_7726.webp
IMG_7731.webp
IMG_7717.webp

IMG_7783.webp
IMG_7777.webp
 
So how many pieces would a complete set consists of?
 
512Tremor said:
So how many pieces would a complete set consists of?
Click to expand...
We've got the engine/trans skid, t-case skid and shock guards ready; we offer all the components individually (the shock guards are provided as a set), or combined as a package.
 
MDethloff said:
View attachment 267613View attachment 267614

We’re there.

We made lots of small tweaks to this iteration, and fit & function with the updates are spot on! I took a vid but it’s too much to upload here. These are right where we want them - we’ll be launching our HD engine/trans and transfer case skids, and rear shock guards.

I’ve got another test fit on Monday morning, and I’d like to check the exhaust on the 17-19’s, but it looks like we are golden for all 2017-26 trucks, with all powertrains. We were able to accommodate a lot of space for aftermarket oil pans with the update; there’s probably some that are too big but we should be able to fit most of them.

I’ve had several guys that are going to Moab ask me if we could have these skid plates ready before the event. I have been putting in a lot of hours to see if we could make it happen, and at this point I believe we can say YES to for 2020-26 trucks, and maybe for 17-19.

*If you’re going to moab* and are interested in a skid plate package, please message me right away. I’ll want to chat with you about your truck. I’m planning to make a small production run for you guys, so we can get them to you in time. Otherwise we’ll have our regular public launch around next weekend.

We just launched the new site and I’m building out the new part pages, I might have that all live tonight.

dethloffmfg.com

Thanks guys!
Marcus

View attachment 267622View attachment 267623View attachment 267624
View attachment 267615View attachment 267616
Click to expand...
So what you're demonstrating in these photos is that a certain someone's mama* (won't name names) could stand on this and it would hold up fine.

*throw back to the classic you're mama joke.
 
DTX2023Tremor said:
So what you're demonstrating in these photos is that a certain someone's mama* (won't name names) could stand on this and it would hold up fine.

*throw back to the classic you're mama joke.
Click to expand...
I can't go so far as to say that these will hold somebody's mama, but I *can* say that somebody's mama could hold up your truck, using these skid plates 😛
 
MDethloff said:
View attachment 267613View attachment 267614

We’re there.

We made lots of small tweaks to this iteration, and fit & function with the updates are spot on! I took a vid but it’s too much to upload here. These are right where we want them - we’ll be launching our HD engine/trans and transfer case skids, and rear shock guards.

I’ve got another test fit on Monday morning, and I’d like to check the exhaust on the 17-19’s, but it looks like we are golden for all 2017-26 trucks, with all powertrains. We were able to accommodate a lot of space for aftermarket oil pans with the update; there’s probably some that are too big but we should be able to fit most of them.

I’ve had several guys that are going to Moab ask me if we could have these skid plates ready before the event. I have been putting in a lot of hours to see if we could make it happen, and at this point I believe we can say YES to for 2020-26 trucks, and maybe for 17-19.

*If you’re going to moab* and are interested in a skid plate package, please message me right away. I’ll want to chat with you about your truck. I’m planning to make a small production run for you guys, so we can get them to you in time. Otherwise we’ll have our regular public launch around next weekend.

We just launched the new site and I’m building out the new part pages, I might have that all live tonight.

dethloffmfg.com

Thanks guys!
Marcus

View attachment 267622View attachment 267623View attachment 267624
View attachment 267615View attachment 267616
Click to expand...
If there's ever been a skid plate deserving to be on a Super Duty Tremor... this is it. 💪
 
You must log in or register to reply here.

Tremor Forum Fav 👍

Power Stop Z36-1680 FrontCarbon-Fiber Ceramic Brake Pads - Grab a set through Amazon!

Tremor Forum Photos

Latest Discussions

Back
Top Bottom