Curt vs Bulletproof vs B&W

[Randy92Fox]

Does the B&W have any options for a sway bar? Or other sway bar options that would work with it?

 

[Tx-Tremor6.7]

I called PacLock to verify the model I needed, then at their suggestion ordered thru Amazon. Can’t remember if it was better price of free shipping, but you can still pick your key/lock code when you order thru Amazon so if you order other locks they can all be keyed alike.

PACLOCK's UCS-80S-250 Trailer Hitch Lock, Buy American Act Compliant, 5/8" Pin for 2", 2-1/2", & 3" Receivers, Stainless Steel, High Security 6-Pin Cy https://www.amazon.com/dp/B08LR2HZV6/ref=cm_sw_r_cp_apip_CelFzjhn6HENK

Thanks, I may try the PacLock. I have not lost the lock on my BP pin, but it is very difficult to engage when installed on the truck and the locking part is easy to defeat.

On my last short trip, I left the lock off and just used the safety cotter pin. I was not planning to leave the BlueOx WDH on the truck, so I was not worried about theft.

 

[JASmith]

I just found this guy on Amazon, it has plenty of span for the 3" receiver, with the cotter pin, and locks. Other than not knowing anything about the brand it looks pretty good.

Amazon.com

 

[AARONC11]

I use the weigh safe 8" drop, 3" shaft. I bought the locking pin through them

 

[Birdhunter39]

Not sure if i've posted this or not but for the sake of reference my 7" b&w stow and go is the shortest drop i'd want for my small utility trailer. Could possibly get away with a 6" on the 21' boat and anything heavy as well. Depends on tongue weight.

 

[StrikezoneNJ]

I also went with the B&W Tow and Stow for the same reason! It works awesome and looks very stout on the back of the truck...

@Tx-Tremor6.7 what drop did you go with?

 

[Tx-Tremor6.7]

@Tx-Tremor6.7 what drop did you go with?

Here is the one I bought with a 7” drop:

B&W Stow and Go

I have used it twice and it worked flawlessly.

My normal hitch is a Blue Ox WDH with a 9” drop for my TT.

 

[StrikezoneNJ]

Is everyone still happy with packlock for hitch lock? I was going to order b&w tow and stow 7” and packlock for hitch lock , plus a couple for my trailers

 

[mattdm]

I did the buy once cry once and got a B&W 7.5" with the 3" shank. Its very heavy duty and looks great.

Probably could have gotten away with the 5", haven't needed any of the lower settings.

 

[RangerR47]

I just received my B&W 7" drop and bulletproof locking pin yesterday. From what I read, 7" seems to be the one that covers just about any type of trailer you would ever use.

When I got my travel trailer the guy threw in his Curt adjustable hitch with anti-sway bars, etc so I just keep that for towing the travel trailer since its setup and ready to go and will keep the new B&W on hand for any other towing needs.

 

[Tx-Tremor6.7]

Is everyone still happy with packlock for hitch lock? I was going to order b&w tow and stow 7” and packlock for hitch lock , plus a couple for my trailers

I am still using my BulletProof hitch lock that is very difficult to latch. The last two times, I have used it with just the safety cotter pin. If anyone can vouch for paclock, I might pick one up before my next trip out.