DrSpeed
Tremor Fiend
- Joined
- Dec 8, 2021
- Messages
- 431
- Reaction Points
- 1,024
- Location
- San Francisco
- Current Ride
- 2021 F350 Platinum
Again, no. It's locked in the PCM, and not accessible by Forescan.IS THERE A CODE TO GET RID OF THE GOVERNOR.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Again, no. It's locked in the PCM, and not accessible by Forescan.IS THERE A CODE TO GET RID OF THE GOVERNOR.
Caution
I change the settings for Tire Size on Monday and my truck had 2 codes after I did this. I was instructed to make an appointment with a dealership near. I went in today and they found that my BCM and PCM are both fried and need to be replaced. Ordered both will be in next week. So for $2,659.00 I can live with my Speedometer off 4 MPH.
highly unlikely.Caution
I change the settings for Tire Size on Monday and my truck had 2 codes after I did this. I was instructed to make an appointment with a dealership near. I went in today and they found that my BCM and PCM are both fried and need to be replaced. Ordered both will be in next week. So for $2,659.00 I can live with my Speedometer off 4 MPH.
what size are you trying to program for? 2951 seems very highPlain English to 2951mm
Id like to know this tooHave there been any updates to the spreadsheet and what can be done in the last year or so? I messed around with this after first getting my 2020, but haven't thought about it much since. Where can I find the latest version of the spreadsheet?
I did mine a while back following this youtube video....I tried changing the splash screen to the Ford Performance splash screen but it doesn’t change. It still shows the Ford. Any suggestions?
Did you make the changes in the plain English file? I just changed the values from 80 or whatever it was from the factory to 50 front and rear. I know some spreadsheets tell you to do it in the As Built file, but that wasn't necessary for mine.When I am trying to reset my tire pressures I am getting an error.
I set the values and then click write and then it starts scrolling through the
options
No changes in block 1, skipped
No changes in block 2, skipped
No changes in block 3, skipped
No changes in block 4, skipped
No changes in block 5, skipped
No changes in block 6, skipped
No changes in block 7, skipped
No changes in block 8, skipped
No changes in block 9, skipped
The vehicle conditions are incorrect
Service procedure has been interrupted
Any ideas on where it is getting hung up at?
Its the newest version or forscan and the TPMS values are the only thing I am trying to change.
yes sir, in the body control module file, non “as built” version.Did you make the changes in the plain English file? I just changed the values from 80 or whatever it was from the factory to 50 front and rear. I know some spreadsheets tell you to do it in the As Built file, but that wasn't necessary for mine.
Ed
That stumps me. I messed a bit with it in the as built and had issues (resolved when I went back to factory values) but when I did the english, it was a double click on the number, type 50 and write. Maybe someone else has more insights.Also, the tpms on the dash is also
yes sir, in the body control module file, non “as built” version.
Same with mine. I set my to 25Did you make the changes in the plain English file? I just changed the values from 80 or whatever it was from the factory to 50 front and rear. I know some spreadsheets tell you to do it in the As Built file, but that wasn't necessary for mine.
Ed
If you are using v2.3.54 you can uninstall and go back to v2.3.53 or a prior release and see if that works.Also, the tpms on the dash is also
yes sir, in the body control module file, non “as built” version.
Good idea. I will try that right quick!If you are using v2.3.54 you can uninstall and go back to v2.3.53 or a prior release and see if that works.
@Rock Taxi @MCRTREMOR what version are you guys running? I haven't made any changes recently and am probably on either 49 or 50 still...
Hmm... what OBD interface are you using?Nope, I went back to v2.3.53 and same error at the same spot.
Hmm... what OBD interface are you using?
When you start Forscan you can also say "no" when it asks to load an existing profile. That will force a refresh of the modules.
If the English version mapping was messed up on the later releases for some reason trying it in As-Built is the direct way of making the change. If you want to try that I can help with the correct entry.
OK so you were on to something. I did no to load a profile and it all worked. I should have stopped with the tire pressure though cause I messed something up, hopefully you might be able to help me figure out what I need to do to fix it.Hmm... what OBD interface are you using?
When you start Forscan you can also say "no" when it asks to load an existing profile. That will force a refresh of the modules.
If the English version mapping was messed up on the later releases for some reason trying it in As-Built is the direct way of making the change. If you want to try that I can help with the correct entry.