🛠️ What did you do to your Tremor today? [2019-2024]

[MJM_MWF]

Nice, but I don’t know if the price differential is worth it. The sliding tops are cool. Couple of things I saw that I don’t like.
- Gap between halves is just asking for small tools, etc to be lost forever.
- Closed off between drawers and sidewalls. The new Decked is open so put long skinny objects there if needed. I like that option.

I like this.
Especially the ability to only get 1 drawer
Can’t find much on the YouTube about them though.

 

[runline]

Put on AMP running boards today. Took a while, but happy with the results.

Can you share the link to the ones you installed? also any tips on the installation and where the electronics connect etc? Thanks

 

[Generalburl]

Can you share the link to the ones you installed? also any tips on the installation and where the electronics connect etc? Thanks

Sure. I ordered on Amazon, great price.

• AMP Research - 2022 Ford F-250/350/450 All Cabs (Fits Only Sync 4 Models) PowerStep Plug N Play - Blk (76242-01A)

The AMP instructions are pretty good, there are a few YouTube videos that were helpful also.

Biggest help was to lay out and route the wiring to make sure everything fits before you connect and zip tie anything. I had to add some wire for the driver side front light.

Take your time and give yourself about 5 hours start to finish.

Have someone help you install the actual step portion at the end. I did it by myself and it took a while.

Shoot me a message if you have specific questions.

Good luck!

 

[runline]

Sure. I ordered on Amazon, great price.

• AMP Research - 2022 Ford F-250/350/450 All Cabs (Fits Only Sync 4 Models) PowerStep Plug N Play - Blk (76242-01A)

The AMP instructions are pretty good, there are a few YouTube videos that were helpful also.

Biggest help was to lay out and route the wiring to make sure everything fits before you connect and zip tie anything. I had to add some wire for the driver side front light.

Take your time and give yourself about 5 hours start to finish.

Have someone help you install the actual step portion at the end. I did it by myself and it took a while.

Shoot me a message if you have specific questions.

Good luck!

Thanks brother!

 

[DefconTremor]

When I bought my truck back in December, I looked all over the country for a reasonably priced Tremor. Could not find one in carbonized gray with low miles below 75K. Found my 2022 6.7 XLT black appearance package with only 7K miles, and also has the 7yr/100k mile gold certified warranty. Flew up to Pittsburg and picked it up for 58K OTD. Not a Tremor, but y’all seem cooler than the other forums . Did most mods the past few weeks. The Sailun’s were a gamble being so new but I’m very happy with them so far, almost half the price of Nitto RG’s of the same size - 3 peak rated, studdable, and 45k warranty too.

Carli level springs
Carli track bar
37x12.5x20 Sailun Terramax RT’s
Blistein 5100’s
Carli SS brake lines
CJC rear block
Fox 985-24-001 steering stabilizer
SPC 2.3/2.6 caster shims
Centramatic balancers
F150 step brackets
OUO radius arm drop brackets ordered to get more caster, only at 2.1/2.6 with the shims.

 

[Gotbeer]

1 million views on this thread.

 

[DIG]

I installed my BuiltRight Industries rear seat-back release. Took about 5 minutes after waiting for it 2 or 3 weeks. To my dismay there really isn’t any room back there to put anything significant because of the speaker (sub) and amp taking up all the space. Oh well! It’s still a handy accessory!

 

[BroncOh]

I installed my BuiltRight Industries rear seat-back release. Took about 5 minutes after waiting for it 2 or 3 weeks. To my dismay there really isn’t any room back there to put anything significant because of the speaker (sub) and amp taking up all the space. Oh well! It’s still a handy accessory!

I keep some extra DOT airline there and a tarp.

 

[Jnelli]

Got my ARE installed today!

 

[Maine Guide]

Got my ARE installed today!

Oh I like that,which model. I have really been thinking of getting one for my truck if/when it arrives. I have to drive 2.5 hrs to get install. I’ve done pricing around $4700 for an internet price without talking to anyone

 

[Blade420Play]

Got my ARE installed today!

More pics please. I am looking to get the cxhd for the ladder rack. Did you get the strip lights and whatnot? Do we lose the cargo camera view?

 

[Jnelli]

Oh I like that,which model. I have really been thinking of getting one for my truck if/when it arrives. I have to drive 2.5 hrs to get install. I’ve done pricing around $4700 for an internet price without talking to anyone

It’s the CX classic. I went with that one because I wanted the full frame door in the rear instead of the full glass door. I was thinking longevity. It’s a seamless look honestly and the windows are framed on the side but they have a bigger gasket so it makes it look like it’s frameless. I really like it.

 

[Jnelli]

More pics please. I am looking to get the cxhd for the ladder rack. Did you get the strip lights and whatnot? Do we lose the cargo camera view?

I will take a few more in the daylight tomorrow… yes you lose the cargo camera.. not sure if they have an adapter for it or not. I just got the free battery led light… it’s plenty bright for me anyway but not as bright as strip lights I am sure!

 

[Jnelli]

I will take a few more in the daylight tomorrow… yes you lose the cargo camera.. not sure if they have an adapter for it or not. I just got the free battery led light… it’s plenty bright for me anyway but not as bright as strip lights I am sure!

This is just the free light that came with the install!

 

[Jnelli]

Oh I like that,which model. I have really been thinking of getting one for my truck if/when it arrives. I have to drive 2.5 hrs to get install. I’ve done pricing around $4700 for an internet price without talking to anyone

I got the shell and the spray in bed liner done for 3230 OTD. Both were done the same day

 

[Blade420Play]

I got the shell and the spray in bed liner done for 3230 OTD. Both were done the same day

Did you ask them not to spray the bed bolts?

 

[Blade420Play]

This is just the free light that came with the install!

Last question, was the light from the installer or are? That's a good bit of light!

 

[Jnelli]

Last question, was the light from the installer or are? That's a good bit of light!

They didn’t spray the bolts on their own lol this is my first spray in line so I wasn’t sure if they were supposed to or not haha and I do believe that’s the light that comes with the shell from ARE..

 

[LVRaider]

They didn’t spray the bolts on their own lol this is my first spray in line so I wasn’t sure if they were supposed to or not haha and I do believe that’s the light that comes with the shell from ARE..

So what made you go with the spray liner on the inside instead of the carpet? What made you choose ARE over Leer? I've been really looking into these caps also.

 

[Blade420Play]

Oh I like that,which model. I have really been thinking of getting one for my truck if/when it arrives. I have to drive 2.5 hrs to get install. I’ve done pricing around $4700 for an internet price without talking to anyone

This is the price I got for mine, doesn't include taxes, etc. Haven't actually purchased it yet, so I don't know if it'll get close to $4700. If it does, I'll probably just go pick it up and install it myself