Regen when DPF 75%

Hunterman

Tremor Addict
Joined
Oct 24, 2020
Messages
1,276
Reaction Points
1,855
Location
Sacramento, CA
Current Ride #1
Chevy 2500JD
MY24 has always (used to anyways) preformed regens when the DPF was around 50% give or take 5-10%. The last 5 or 6 times it went into regen the DPF was 75-85% full. Has something changed with a ford update? Until a few months ago I think I saw my filter get to 65% maybe 1 time. Now it constantly gets to 75% full before regen.

Just curious if anyone else has experienced this too.
 
Depends on driving if I’m only using the truck back and forth to work itll usually be (like you said) 50%-65% if i add in other driving then that will vary I’ve seen as high as 80% that only happened once but it always always regens right at 500 miles no matter percentage
 
On my MY27, I have seen it slowly get all the way to 100% before appearing to initiate a regen. This was also while towing a car hauler trailer at decent speed, so it seems like it had the correct conditions to regen whenever it wanted. The previous time I saw it regen, it was probably around 100% as well. The past 2 times I have driven it, it has been hanging out around 65% and still has not chosen to initiate a regen even though I was running down the highway which i would assume would be ideal conditions. Take all of that with a grain of salt as I only have around ~800 miles on the truck, but the point is that the newer trucks at least seem to so far wait until they are on the fuller side. Getting things up to temp takes a lot of energy, just like accelerating. Staying at a temperature (longer regen) for a longer time due to a fuller filter (Within reason) is likely the more efficient way 🤷‍♂️
 

Latest Discussions

Back
Top Bottom