Here's your chance! Be a part of the process.

[Adventure Lab]

We have done this process a few times on other forums and it has been a lot of fun and great inspiration. Attached is a video of our upcoming BASE (Bed Attachment and Storage Equipment) floor rails for the Super Duty trucks. We will be developing slides, drawers, tire carriers, etc. off of these rails similar to what we do for Ranger and F-150. However, I'm always up for new ideas that would be helpful for those of us that have these trucks. What kind of products would you like to see for the bed?

We'll have a full 3-piece MOLLE panel set as well for the inside of the bed.

I'm also thinking we'll build some type of heavy duty attachment rail that spans the two BoxLink mounts on one side of the bed.

The two pieces on the rails now are there for reference. On the left is the bottom component of our Vertical Spare Tire Mount for F-150 and Ranger. The other component, closer to the center is the base for our 3 Ton Badland Jack Mount.

What else?

I should have a prototype set of these rails in the truck for this weekend's meetup. Not sure what I'll have on them yet, other than the Badland Jack Mount.

 

[donmatteo]

I'd like a drawer option that you can use with the factory rolling tonneau cover. The can for it takes up a lot of space and the decked system can't be used.

You make something similar or usable with the factory tonneau and ill send you my CC# now.


Also, Box links and full molle don't work with the tonneau so something that would work with it would be awesome.

 

[Avslash]

Drawers that allow for towing a gooseneck.

Most of the time would love to have a drawer system, but don't want to pull the whole apparatus out whenever I need to hitch up the trailer.

 

[majorbison]

Drawers that allow for towing a gooseneck.

Most of the time would love to have a drawer system, but don't want to pull the whole apparatus out whenever I need to hitch up the trailer.

any modular storage while allowing the gooseneck would be amazing. At that point maximising the bed in my opinion.

 

[majorbison]

We have done this process a few times on other forums and it has been a lot of fun and great inspiration. Attached is a video of our upcoming BASE (Bed Attachment and Storage Equipment) floor rails for the Super Duty trucks. We will be developing slides, drawers, tire carriers, etc. off of these rails similar to what we do for Ranger and F-150. However, I'm always up for new ideas that would be helpful for those of us that have these trucks. What kind of products would you like to see for the bed?

We'll have a full 3-piece MOLLE panel set as well for the inside of the bed.

I'm also thinking we'll build some type of heavy duty attachment rail that spans the two BoxLink mounts on one side of the bed.

The two pieces on the rails now are there for reference. On the left is the bottom component of our Vertical Spare Tire Mount for F-150 and Ranger. The other component, closer to the center is the base for our 3 Ton Badland Jack Mount.

What else?

I should have a prototype set of these rails in the truck for this weekend's meetup. Not sure what I'll have on them yet, other than the Badland Jack Mount.

i have nothing to contribute butttttt


happy birthday

 

[Adventure Lab]

I'd like a drawer option that you can use with the factory rolling tonneau cover. The can for it takes up a lot of space and the decked system can't be used.

You make something similar or usable with the factory tonneau and ill send you my CC# now.


Also, Box links and full molle don't work with the tonneau so something that would work with it would be awesome.

We have that setup for the Retrax on the F-150, which is similar to the OEM retractable cover. I should have those live tomorrow. We'll do the same for the Super Duty.

It's kind of hard to see in these photos, but we have a battery box (battery, inverter, compressor, chargers, etc.) that lives under the drum. Then, the drawers stop short of the drum. In this particular truck, we ended up removing the Retrax and going with a RSI SmartCap, so we reconfigured everything so we could put a full length slide on top of the drawers. This full length slide would not work with the retractable covers, but it helps to see it in space.

 

[Adventure Lab]

Drawers that allow for towing a gooseneck.

Most of the time would love to have a drawer system, but don't want to pull the whole apparatus out whenever I need to hitch up the trailer.

Yes, that would be great! I think I would use that as well in our truck.

 

[Adventure Lab]

i have nothing to contribute butttttt


happy birthday

Ooorah!

 

[HeavyAssault]

Don't forget the CCLB trucks.

 

[Adventure Lab]

Don't forget the CCLB trucks.

We don't get a lot of interest in long bed stuff, but always open to it.