Has anyone done this set up?

Kodyak

Tremor Member
Joined
Dec 30, 2020
Messages
12
Reaction Points
19
Location
Maine
Current Ride #1
2020 f250 Tremor
Hi everyone!
I want to go with a bigger tire set up on my tremor, and I’d really like to keep it the stock suspension (no level) because I tow a lot and I want to keep the warranty. The set up I was looking at was toyo mts that are a 315/70r 18, which is basically a 36x13 inch tire. I was also thinking about going with fuel wheels that have a 1mm offset, but wasn’t sure if they would stick out too far. Anyone with input on this would be greatly appreciated! Thank you!
 
You will need a larger wheel so the Fuel wheels should work good. I have 35 x 12.50s on Fuel wheels with 1MM offset. There should be plenty of room for s slightly larger tire. (Looking at mine I could still go larger ) All tires measure differently. Check the factory specs on the stock tires and what you are looking at. You will see the difference in size. I do not know how the Toyos run. Some run larger and some smaller in diameter. I hear those are good tires. Post up some photos when you get it done. ( I have the Nitto RGs )
 
Hi everyone!
I want to go with a bigger tire set up on my tremor, and I’d really like to keep it the stock suspension (no level) because I tow a lot and I want to keep the warranty. The set up I was looking at was toyo mts that are a 315/70r 18, which is basically a 36x13 inch tire. I was also thinking about going with fuel wheels that have a 1mm offset, but wasn’t sure if they would stick out too far. Anyone with input on this would be greatly appreciated! Thank you!
I havent run that on a SD, but did run 315/70R18 Toyo MT on 0 offset wheels on my Gen 1 Raptor. It was a good compromise between 35 and 37 before I did glass fenders.

They measured out at a true 36”, but actually looked slightly narrower than the Toyo MT 35”x12.5” even though they calculate out to 13”.

+1 offset wheels will sit almost flush with fenders on SD.

Wish I could be of more help on the SD application.
 

Attachments

  • 71FCF7E3-7D0B-4B97-BF13-566C7D8174CE.webp
    71FCF7E3-7D0B-4B97-BF13-566C7D8174CE.webp
    217.6 KB · Views: 111
Last edited:
You will need a larger wheel so the Fuel wheels should work good. I have 35 x 12.50s on Fuel wheels with 1MM offset. There should be plenty of room for s slightly larger tire. (Looking at mine I could still go larger ) All tires measure differently. Check the factory specs on the stock tires and what you are looking at. You will see the difference in size. I do not know how the Toyos run. Some run larger and some smaller in diameter. I hear those are good tires. Post up some photos when you get it done. ( I have the Nitto RGs )
Awesome thanks for the reply, the offset on yours is what I’m looking for. I’ll post pictures when I get the set up done
 
Awesome thanks for the reply, the offset on yours is what I’m looking for. I’ll post pictures when I get the set up done
If you look close at my picture you can see the offset of the front tire. The wheel is slightly turned to the right. But its the 1MM with 35 x12.50 Nitto RG. They stick out a bit from the fender flare.

I think your size will be perfect Just check all the dimensions from the tire specs and compare. They all measure different ,they weigh different and most importantly the load bearing capability is different. Make sure they will support what you intend to haul.
 
If you look close at my picture you can see the offset of the front tire. The wheel is slightly turned to the right. But its the 1MM with 35 x12.50 Nitto RG. They stick out a bit from the fender flare.

I think your size will be perfect Just check all the dimensions from the tire specs and compare. They all measure different ,they weigh different and most importantly the load bearing capability is different. Make sure they will support what you intend to haul.
Thanks man! It’s awesome getting this much help and info from the forum!
 
You will need a larger wheel so the Fuel wheels should work good. I have 35 x 12.50s on Fuel wheels with 1MM offset. There should be plenty of room for s slightly larger tire. (Looking at mine I could still go larger ) All tires measure differently. Check the factory specs on the stock tires and what you are looking at. You will see the difference in size. I do not know how the Toyos run. Some run larger and some smaller in diameter. I hear those are good tires. Post up some photos when you get it done. ( I have the Nitto RGs )
any rubbing or modifications in order to fit those tires and wheels?
 
any rubbing or modifications in order to fit those tires and wheels?
the 35 x 12.50s with 9" wide 18" wheels 1mm offset not a problem. Plenty of clearance.
 
Hi everyone!
I want to go with a bigger tire set up on my tremor, and I’d really like to keep it the stock suspension (no level) because I tow a lot and I want to keep the warranty. The set up I was looking at was toyo mts that are a 315/70r 18, which is basically a 36x13 inch tire. I was also thinking about going with fuel wheels that have a 1mm offset, but wasn’t sure if they would stick out too far. Anyone with input on this would be greatly appreciated! Thank you!

You can check my previous threads/posts on this. I did the 315/70r18 in the Yokohama Geolander MT (in my opinion these will beat toyo in every category, including road noise). Mine are .10 inches less than the Toyos which measure out to exactly 35.7 (mine are 35.6). Personally i don't mind the stock rims, and discount WILL mount these tires on the stock rims. I did adjustable fox 2.0s from accutune at stock height and with these tires (i run them at 50psi) the ride improved a lot in terms of comfort.
 
Back
Top Bottom