📢 DEAL FordTremor.com November 2026 Group Buy!

Green/blue and white/green, pretty straight forward on the brake control module. Verified the tap made contact through the wires jacket. Triple checked and nothing. Every now and then a small flash from the led lights.

There was a set of similar colored wires/tracer near the OBD on the F150 we did. Did you pull the plug off of the BCM to verify you have the correct ones? Also make sure the fuse is inserted, solid ground and positive connection at battery, and the ECU is plugged in all the way.

I just did some snooping on your old posts. It looks like you have a 2022. What was the part number on your box? 22 model year is split between XL and XLT trucks and Lariat and higher trucks. Need to make sure you have the correct ECU that corresponds with your trim.
 
Last edited:
Thank you for the ideas to check. I have a 2026 F350 currently. Fuse for steps is good, as I am getting power to the control box, verified by taking the cap off the update port, there is a flashing led inside.
There are 2 of the same colored wires coming out of each port the brake control module, I have tried both of them. with the same results. Checked the trailer controller fuse and it is good. I have no idea what it could be at this point.
IMG_2635.webp
 
Installed the same boards on 22 here's the best pic I could grab right now
1794785105378.webp
 
Back
Top Bottom