Ford Performance Exhaust System Question

mkb1314

Tremor Member
Joined
May 5, 2026
Messages
5
Reaction Points
7
Location
Keithville, LA
Current Ride #1
2026 Ford F-250 Lariat Tremor 7.3L Godzilla
Just installed this system a couple of weeks ago...

Fit and finish are 1st class, as well as sound quality. Very happy with all but ONE little thing...when slowing down, as the engine ramps down, the exhaust tips rattle together around 1500-1700RPM. I haven't noticed it at any other engine speed or when accelerating. It only seems to occur as engine speed is decreasing and in that 1500-1700RPM window somewhere.

Anyone else experience this? If so, got an easy fix?
 
Just installed this system a couple of weeks ago...

Fit and finish are 1st class, as well as sound quality. Very happy with all but ONE little thing...when slowing down, as the engine ramps down, the exhaust tips rattle together around 1500-1700RPM. I haven't noticed it at any other engine speed or when accelerating. It only seems to occur as engine speed is decreasing and in that 1500-1700RPM window somewhere.

Anyone else experience this? If so, got an easy fix?
Are you sure it's the tips and not one of the heat shields under the truck? I have the problem with the heat shields. @Sccritterkiller removed his to get rid of the sound. I have not taken mine off yet
 
20251213_093221.webp


Tin snips for the metal bands no more rattle.
 

Attachments

  • 20251213_093255.webp
    20251213_093255.webp
    373 KB · Views: 14
Are you sure it's the tips and not one of the heat shields under the truck? I have the problem with the heat shields. @Sccritterkiller removed his to get rid of the sound. I have not taken mine off yet
Pretty sure it's the tips...it was a little worse before I manually tried to separate them a bit by hand. It would do it after the RPM settled down from a fresh start. I made sure to be standing right there when it did. As matter of fact, the very first time I cranked it I caught it on video.

I'm not sure how much good I did trying to bend them away from each other by hand, but it seems to have helped a tiny bit, although I can't them moving much like that...not without some mechanical means of bending the pipe. Still, there's that little bit of rattle I described before.

I am going to check the heat shield by the spare again, but I seem to remember there being quite a bit of space there. There's no other heat shields on the new muffler or piping.
 
I have read reviews with others complaining about the same problem and it gets worse. They welded a strap between the two pipes to keep them separated.
 
The tips are hitting eachother or hitting the truck body? I installed the Ford Performance exhaust a few weeks ago and haven't had this issue.
 
Just buy the Borla S-Type. Slightly better set-up than the Ford which is made by Borla for Ford Performance. The S-Type is only about $200 more.
 
The tips are hitting eachother or hitting the truck body? I installed the Ford Performance exhaust a few weeks ago and haven't had this issue.
They're hitting each other. The gap between them is very small and when the mood hits just right, apparently they give each other a little tickle.
 
The gap between them is very small and when the mood hits just right, apparently they give each other a little tickle.
What kind of "tips" we talking about here....🤣
Sounds like some shop scrap spot welded between the pipes is the easiest fix.
 
  • Wow
Reactions: VB!
What kind of "tips" we talking about here....🤣
Sounds like some shop scrap spot welded between the pipes is the easiest fix.
Figured that would get some extra attention!:LOL:

For as nice as this system is, we really shouldn't have to be welding scrap steel between the pipes!
Is this for a Gasser or Diesel? Just curious...
Gasser!
Just buy the Borla S-Type. Slightly better set-up than the Ford which is made by Borla for Ford Performance. The S-Type is only about $200 more.
Too late! I already bought the Ford (Borla) system and installed it! It's exactly what I was looking for except for this one minor problem.
I have read reviews with others complaining about the same problem and it gets worse. They welded a strap between the two pipes to keep them separated.
I watched as many YouTube videos on it as I could and what reviews I could find praised it with no mention of this problem. I'd be curious to see what others said about it, if Ford addressed it, and if there was a better fix than cramming a piece of scrap flat bar in there between them.
 
I noticed it on mine as well, but after about 1000 miles with it, i don’t hear it anymore! Maybe it worked itself out or maybe I just don’t pay it any mind and got used to it. Your description of everything else is spot on though. Love the look and sound!!
 
I noticed it on mine as well, but after about 1000 miles with it, i don’t hear it anymore! Maybe it worked itself out or maybe I just don’t pay it any mind and got used to it. Your description of everything else is spot on though. Love the look and sound!!
I was hoping it might work itself out, but that's yet to happen! I've put about 1700-1800 miles on it since I installed it a few weeks ago. Still waiting on it to magically stop!
 
Figured that would get some extra attention!:LOL:

For as nice as this system is, we really shouldn't have to be welding scrap steel between the pipes!
But here we are. You can take 15 min and fix it or keep bitchin about the rattle...bet you a beer Ford doesn't have a better fix.
 
Since it is a Ford product I would stop by a dealer and ask them if they can do anything for you. Maybe you'll get lucky and they will swap it out for you. Doubtful but maybe. You could also try some kind of heat resistant felt to attach in between the tips?
 
Since it is a Ford product I would stop by a dealer and ask them if they can do anything for you. Maybe you'll get lucky and they will swap it out for you. Doubtful but maybe. You could also try some kind of heat resistant felt to attach in between the tips?
Made by Borla for Ford. Maybe call Borla too!
 
I watched as many YouTube videos on it as I could and what reviews I could find praised it with no mention of this problem. I'd be curious to see what others said about it, if Ford addressed it, and if there was a better fix than cramming a piece of scrap flat bar in there between them.
I have seen it several times on the FB groups and thats how they fixed it. Most YouTube videos the exhaust is days old if not minutes old. It’s also a problem, on other FP exhaust products for other vehicles I passed on it because of that and I wanted something that went catback.
 
Just installed this system a couple of weeks ago...

Fit and finish are 1st class, as well as sound quality. Very happy with all but ONE little thing...when slowing down, as the engine ramps down, the exhaust tips rattle together around 1500-1700RPM. I haven't noticed it at any other engine speed or when accelerating. It only seems to occur as engine speed is decreasing and in that 1500-1700RPM window somewhere.

Anyone else experience this? If so, got an easy fix?
I had the same issue with my Ford Performance Exhaust. I just took (2) ~36" closet rods, put them in each end, and hand pushed them apart. It doesn't take much and haven't had an issue since. ~59k miles on the exhaust system and did that when it was new. I didn't move it much and visually looked about the same. Probably only move 1/8" or so.
 
Back
Top Bottom