Camper Cam Wolfbox G900TriPro

[Phil314]

I've got a Wolfbox G900 tripro and spend some time today hooking up a second camera for my camper.
Ran a second cable from Wolfbox all the way back to the rear bumper and installed a quick connect.
Then built a cable from the QC out to the camera to permanently mount on the camper.
Now when I load the camper, it will be trivial to switch to the second camera and use the Wolfbox to see behind the camper.

Stripping and soldering 26 gauge wires blows.
I'm old, my eyesight sucks and I shake like a chihuahua.

 

[modified]

Nice work! I'm sure that will be handy.

 

[thatdood]

Did you run the cable completely underneath the truck starting from the firewall?

 

[Phil314]

Did you run the cable completely underneath the truck starting from the firewall?

Yes, kind of. The cable starts at the wolfbox, runs in the headliner around the driver side, down the rear driver side c piller and out of the cab just under the trim at the back corner of the rear door. I drilled a hole and 3D printed a grommet. Then ran it all the way along the frame rail to the rear bumper. There is a wolfbox connecter by the spare tire as the quick connect needs to be installed from the outside of the bumper.

 

[Phil314]

Just wanted to add one final note to this install.
Here's the 6 pin quick connector I used:

Amazon.com

Truck side had a plug cover.
Camper side did not, but I've got a 3D printer and that was easily solved.
Designed and printed a TPU cap for the quick connector.