Air Logiq

[Aussietraveller]

I have a Brinkley Z3100 with a washer and dryer mounted in the bedroom up front. My Tremor tells me that my pin weight is 3800 pounds. I started with 50PSI in my LogIQ airbags and slowly increased them to 62 PSI where it feels just right. But I am new to all this so don't take my word as expert.
On another point, i have just found 3 leaks in my system, where the fittings attach to the bags and compressor, and have just emailed my install guy to see how he is going to fix them as I am now a couple of thousand miles away.

 

[jred225]

I have a Brinkley Z3100 with a washer and dryer mounted in the bedroom up front. My Tremor tells me that my pin weight is 3800 pounds. I started with 50PSI in my LogIQ airbags and slowly increased them to 62 PSI where it feels just right. But I am new to all this so don't take my word as expert.
On another point, i have just found 3 leaks in my system, where the fittings attach to the bags and compressor, and have just emailed my install guy to see how he is going to fix them as I am now a couple of thousand miles away.

I had a fitting leak as well on the driver side bags, was a simple fix just tightened it down more. Do you also have the tank?

 

[Aussietraveller]

I had a fitting leak as well on the driver side bags, was a simple fix just tightened it down more. Do you also have the tank?

I didn't buy the tank in the end becuase it doesn't have any other uses and the compressor is good enough to handle the airbags. How did you tighten the fittings on the airbags? I was thinking that i need to remove the top plate, which means possibly removing the wheel well liners. I am pissed off with my installers. I am just pleased that i bought the remote control to keep topping up the airbags as i drive.

 

[WhiteHorse]

Although the LogIQ airbags with HD2 are a nicely integrated package, considering using an ARB air compressor instead of the HD2 but using the HD2 air management. Mount the ARB behind the rear seat to keep it out of the weather. Price point appears lower for the ARB and it has a higher duty cycle.

 

[jred225]

I didn't buy the tank in the end becuase it doesn't have any other uses and the compressor is good enough to handle the airbags. How did you tighten the fittings on the airbags? I was thinking that i need to remove the top plate, which means possibly removing the wheel well liners. I am pissed off with my installers. I am just pleased that i bought the remote control to keep topping up the airbags as i drive.

Wish I had more info, but I could hear what sounded like air coming out of the fittings and I brought it back to the installer who then fixed it.
Maybe Logiq has some installers along your route they could recommend?
[email protected] - Frankie is technical support if you have specific questions

 

[Aussietraveller]

Although the LogIQ airbags with HD2 are a nicely integrated package, considering using an ARB air compressor instead of the HD2 but using the HD2 air management. Mount the ARB behind the rear seat to keep it out of the weather. Price point appears lower for the ARB and it has a higher duty cycle.

Thanks for the tip. If i already have the HD2 compressor would you replace it?