Aftermarket 5W/goose neck hitch

[jasoncw]

I opted to remove the factory 5th wheel prep from my order to hopefully speed up delivery. I'm currently leaning toward the B&W turnoverball, looks easy enough for a DIY install. My question is on the wiring harness. Can someone post a pic of what the factory 5W prep electrical connection looks like installed in the bed? I am looking for a wiring harness to install in the same location. Any suggestions? I saw a few on etrailer, but not sure if there are any to avoid, or if the factory harness is reasonably priced.

 

[Bitsniffer]

If you are not stuck on the gooseneck, you can order the factory 5th wheel prep for $563 and it comes with both inner and outer rails for support to get the full weight rating. It also comes with the 7pin wiring for the bed. I am working with a parts guy to find the correct 12/7 connector for the bed and the wiring pigtails to enable the Yaw Sensor that comes with PTBA and 5th wheel prep when you order them both from the factory. The parts guy worked with Ford to find the correct items and ordered a set of connectors to test the setup. Should hear something soon.

 

[PapaRaptor]

1000 shots of my Tremor but not one of that, I will get you one in the AM Just came in from my 5" monster exhaust install.
I was looking at the plate from the underside and its massive. I have lots of confidence in it.

 

[mds2004]

If you have the 360 cameras and want the bed connection with the 12 pin for the yaw sensor I believe this is the part number. I have it on my list to buy but haven't yet.

LCZ-13A576-CE

This is what I found online and isn't my picture so I asked my local dealer about it, but he couldn't find it but quoted me LCZ-13A576-F instead. I am not sure if F is a different part number or a newer revision. I asked and all he could send me was this which looks to be similar or the same.

 

[PapaRaptor]

Here is my wiring from the 5th wheel prep package. The racks and compressor are my progress in my "build"

 

[Bitsniffer]

If you have the 360 cameras and want the bed connection with the 12 pin for the yaw sensor I believe this is the part number. I have it on my list to buy but haven't yet.

LCZ-13A576-CE
View attachment 46313


This is what I found online and isn't my picture so I asked my local dealer about it, but he couldn't find it but quoted me LCZ-13A576-F instead. I am not sure if F is a different part number or a newer revision. I asked and all he could send me was this which looks to be similar or the same.

View attachment 46315

This is exactly what I am trying to figure out with my parts guy and his Ford rep. Those numbers don't pull up as correct but are probably an engineering number. Thanks for sharing.

 

[jasoncw]

Thank you @mds2004 and @PapaRaptor for the pics/info! Yes, I do have the 360 camera option. Once you eventually order it, I would appreciate if you could update me on whether the part # is accurate. Still waiting on delivery of my truck, so I have some time.