5th Wheel not level

Maxx1776

Tremor Fanatic
Founding Member 📜
Joined
May 23, 2021
Messages
150
Reaction Points
280
Location
Bloomsburg, PA
Current Rides #1
2021 F250 CC 6.7 Tremor
towing a 37' 5th wheel with the Tremor stock suspension, 2360lb tongue weight the truck is squatted and the 5er is still not level (dry weight). Do you guys travel like that? I was always told that the trailer should be close to level so the weight is distributed evenly on the trailer tires, At this point I cant even add air bags. I can only lower the B&W 1 more inch then it will be at its lowest setting.
 

Attachments

  • Tremor pic1.webp
    Tremor pic1.webp
    313.4 KB · Views: 24
  • Tremor pic2.webp
    Tremor pic2.webp
    396.9 KB · Views: 24
  • hitch pic1.webp
    hitch pic1.webp
    73.5 KB · Views: 24
truck looks about right, how much clearance to the bed rails from the fiver? I believe you need at least 6” and it looks like you aren’t much over that.

You can lift the trailer with spacers or ignore it. I have Sumo Springs are my trailer to help without squat.
 
Honestly, that doesn’t look too bad. I place my fist on the bedrail and make the 🤙🏼 . My pinkie raises my fist off the bed and if my thumb touches the cap I’m good.

I know what you’re getting at but I wouldn’t be concerned with that. Trailer looks darn near level. You could lower the B&W that last inch and Timbrens ($250) to help with the squat.
 
These truck sit tall, when we had the independent suspension done they raised the trailer. To get it sitting level think these raised it 3” or so if I remember, MorRyde did the work.
IMG_2041.webp
 
Back
Top Bottom