- Staff 🛡️
- #1
- Jun 8, 2021
- 78
- 14
Special Service Message · SSM 55315
This is a Special Service Message, not a recall. SSMs are informational notes Ford sends dealers about a known condition or a change in procedure. They are not repair orders, and they don't by themselves change what is covered.
Published: Nov 9, 2026
Applies to: F-250, F-350 (2023–2026 model years)
Also listed in the source (outside this forum's coverage): Bronco 2021–2026, Bronco Sport 2022–2026, Edge 2021–2024, Escape 2022–2026, Expedition 2020–2027, Explorer 2020–2027, F-150 2021–2027, F-450 SD 2023–2026, F-550 SD 2023–2026, Maverick 2022–2026, Mustang 2024–2026, Mustang Mach E 2021–2026 and 2 more
Details from NHTSA as of Nov 17, 2026. If NHTSA or Ford revises this notice, this post is updated and significant changes are noted in a reply. The linked documents are the authority, and a dealer can confirm whether it applies to your VIN.
Have you experienced this issue with your truck? Let us know your model year and engine, plus any diagnosis or repair details.
This is a Special Service Message, not a recall. SSMs are informational notes Ford sends dealers about a known condition or a change in procedure. They are not repair orders, and they don't by themselves change what is covered.
Published: Nov 9, 2026
Applies to: F-250, F-350 (2023–2026 model years)
Also listed in the source (outside this forum's coverage): Bronco 2021–2026, Bronco Sport 2022–2026, Edge 2021–2024, Escape 2022–2026, Expedition 2020–2027, Explorer 2020–2027, F-150 2021–2027, F-450 SD 2023–2026, F-550 SD 2023–2026, Maverick 2022–2026, Mustang 2024–2026, Mustang Mach E 2021–2026 and 2 more
Summary (official text)
Some 2020-2027 Ford/Lincoln vehicles may exhibit various symptoms including but not limited to the auto start/stop system not operating as intended with a battery light illuminated and/or charging system fault message in the instrument panel cluster (IPC). The charging system will be operating properly without charging related diagnostic trouble codes (DTC) stored. This may be due to someone using an aftermarket programmer to change the body control module (BCM) configuration to disable the auto start/stop system or perform other unsupported programming modifications.<br /><br /> To correct this condition, download and run the Ford Diagnosis and Repair System (FDRS) application titled "BCM-Charging System Configuration Correction". Running this application will determine if the BCM configuration was modified by the customer and if so, provide the option to return the configuration back to factory settings.<br /><br /> If the BCM Charging System Configuration Correction is not available in the FDRS toolbox and the vehicle is exhibiting concerns related to unsupported aftermarket BCM programming, submit
Sources
- SSM 55315 (PDF, NHTSA document 11039951) — Nov 9, 2026
Details from NHTSA as of Nov 17, 2026. If NHTSA or Ford revises this notice, this post is updated and significant changes are noted in a reply. The linked documents are the authority, and a dealer can confirm whether it applies to your VIN.
Have you experienced this issue with your truck? Let us know your model year and engine, plus any diagnosis or repair details.
