Woolys 2022 Iron Sky Build

Forgot to add my new Plate that finally arrived...
20220206_154056.jpg
 
Man that is one sweet truck!! I hadn’t thought there was that much chrome on the Platinum but now seeing yours completely changed the look imo. Now I’m probably going to have to find a shop for paint once the truck arrives!

I ordered the same coloring, interior/exterior. How do you like the Marsala on the Carbonized Gray? Would you be able to share a couple photos of the interior? Still haven’t seen this interior in person, going off gut and what others have posted. Can’t understand why Ford Dealers don’t have paint/leather samples. We had a whole wall to look and touch at BMW for my wife’s SUV.
 
Man that is one sweet truck!! I hadn’t thought there was that much chrome on the Platinum but now seeing yours completely changed the look imo. Now I’m probably going to have to find a shop for paint once the truck arrives!

I ordered the same coloring, interior/exterior. How do you like the Marsala on the Carbonized Gray? Would you be able to share a couple photos of the interior? Still haven’t seen this interior in person, going off gut and what others have posted. Can’t understand why Ford Dealers don’t have paint/leather samples. We had a whole wall to look and touch at BMW for my wife’s SUV.
More than happy to. I will see if I can get to it today. I will tell you from my opinion it looks so good. I love the contrast. I have gotten nothing but positive feedback on them. I will also say that I have yet to see a picture of either the King Ranch or The marshala interior that actually looks color correct in the picture.
 
Man that is one sweet truck!! I hadn’t thought there was that much chrome on the Platinum but now seeing yours completely changed the look imo. Now I’m probably going to have to find a shop for paint once the truck arrives!

I ordered the same coloring, interior/exterior. How do you like the Marsala on the Carbonized Gray? Would you be able to share a couple photos of the interior? Still haven’t seen this interior in person, going off gut and what others have posted. Can’t understand why Ford Dealers don’t have paint/leather samples. We had a whole wall to look and touch at BMW for my wife’s SUV.
I had my camera guy at work take some pics on the interior for you. He jumped on a plane to England want 10 mins after but will send them back to me tomorrow in sure. Ill. Post or sendthem then. What's your email?
 
Thanks for sending these! Truck’s In Production and can hardly wait
What did you think of the color combo? Like I said I think pictures are hard to truly show the color, you computer, video card, monitor, all of it play a part in what you see vs in person but....
 
What did you think of the color combo? Like I said I think pictures are hard to truly show the color, you computer, video card, monitor, all of it play a part in what you see vs in person but....
I think it’s going to be great. It looks darker in your pics and less red, which I’m excited about
 
Currently my truck has a build date of 10/11 but we will see. Either way I have purchased a few items to immediately add to the truck upon my possession

I am calling it Ironsky at this point and will likely stick with that truck name. It is derived from a few things, First off my truck is Carbonized Gray. Secondly I have this strange affinity to the song Ironsky by Paolo Nutini (if you have never heard it I suggest a listen – has cool insert from “The Great Dictator” movie with Charlie Chaplin as I am a huge movie buff) Anyway I digress. Lastly I grew up in a small mountain valley in Idaho where regular summer and fall evening showers rolled through with a gray sky, thunder and lightning. It’s one of my fondest memories from growing up.

ordered

2022 F350 Platiunum CrewCab 6.7L Tremor
Carbonized Gray
Dark Marsala Console Seats
11,400 GVWR
397 Amp
Engine Block Heater
Power Running Boards
Upfitter Switches

Didnt really add much to her option wise

That all said here is what I am doing to her.

Suspension


ReadyLIFT 2.5" COIL SPRING FRONT LIFT KIT - FORD SUPER DUTY DIESEL 4WD

Icon Vehicle Dynamics, 05-UP FSD 4WD 2.5" FRONT 2.0 VS IR - 66512

Icon Vehicle Dynamics, 17-UP FSD REAR 0-2" 2.0 VS IR – 6651

Icon Vehicle Dynamics, 17-Up Ford Super Duty Adjustable Track Bar Kit

Icon Vehicle Dynamics, 99-UP FSD 4WD STABILIZER (DUAL OPPOSING) 2.0 VS IR

Tires and Wheels

Fuel Offroad D673 Blitz, 18x9 +20 Offset, 8x170 Bolt Pattern, Black w/ Milled Accents

Black Spline Lugs, 8-Lug Kit w/ Key

Nitto Tire, Ridge Grappler, 37x12.50R18LT (found in stock)

Engine

Banks Power, Pedal Monster

Body / Windows / Interior / Lighting

Black Tremor stickers done at Signville

Ceramic Tint 20% on rear windows

Ceramic Tint 35% on front windows

Husky or WeatherTech Floor Liners (undecided)

Baja Design 2020+ Ford Super Duty Dual Fog Pocket Kit SAE Amber / Sport White / Plug N' Play / Upfitter

Baja Design Squadron Sport Flush Mount LED Cube (rear bumber install) Amber Lens / Black Housing w Full Length Rear Harness w/ 2-Way WP Connectors

Paint / Body Color Match on the Following

Mirror Caps

Door Handles

Center Grill Piece that bleeds against the lights (the three bars will remail the brushed alum look)

Ford Emblem Black and Body Color

Tow Hooks (powder coated)

The back Platinum Tailgate Brushed Alum will be painted black but the Platinum and the SuperDuty will stay brushed Alum

The thin chrome piece that runs along the windows will be black

Chrome On running Board Removed

6.7L / Power Stroke Badges in Gloss Black

Access Bed Cover

Line x or Bullet (undecided) Bed Liner

Factory Exhaust painted Flat Black

Factory Cab Light painted Nite-Shades

Hubs Painted Black

Stubby Antenna Black


I plan to do some FORScan Changes, Most Likely

1. TPM - Placard Front (psi) from 60 > 35
2. TPM - Placard Rear (psi) from 80 > 35
3. Use front fog with high beams (allowed)
4. Use high beam with DRL (enabled)
5. Use low beam with DRL (enabled)
6. Chimes - Key in ignition reminder (disabled)
7. Chimes - Vehicle running with door open (disabled)
8. Chimes - Triple ding at start-up (disabled)
9. Add temp above
10. Boot Radio Animation (#16 Ford Performance) Shelby Snake and Ford Performance
11. ????? More to come maybe

I want to give a huge shout out to Nick @ Apollo. Great guy and worked through all this with me, found the items I wanted to have on hand with no waiting for any of it and was always open to figure it out with me, response was fantastic, even made a personal call to me to make sure we had everything and were on the same page. All of that right in the middle of getting married in a few days. I highyl recommend Apollo and Nick.

Secondly Tx Tremor as his truck inspired a lot of what I decided to do. So just a little bump on that build as its a bad ass truck
Can’t wait to see how it turns out!!
 
Can’t wait to see how it turns out!!
Go to page 2, it's nearly done. Pics on and info about the build completions found through those posts
 
Hello Fellow Tremor Owners, Forum Fiends and Those with Tremors on order or thinking about ordering.

It is time for an update on my order and build. Its been 2 months and 3200 miles (about 1160 on the drive home).

First let me say I have had zero issues so far (knock on wood) and am completely in love (if you can be with an inanimate thing)

What I have done so far on my build.

Installed SmartLiner MaxLiner all weather mats

The first big thing I did at 1636 Miles

Installed Ready LIFT 2.5" Coil Spring Front Lift Kit. This took my rake from over 3 inches front to rear to 1/4 inch different
Installed the 4 Icon 2.0 Shocks
Installed Icon adjustable track bar (btw this was such a good thing to add on)
Installed Icon Dual Opposing Steering Stabilizer ( btw highly recommend all of the float after these upgrades dissappeard)

At the same time we pulled the stock wheels and tires and I had already had the replacements pre-mounted my replacements.
Installed the 4 Fuel Offroad D673 Blitz, 18x9 ( +20 Offset ) with 4 Nitto Tire, Ridge Grappler, 37x12.50R18LT Tires.

Next at 1678 Miles had the windows tinted with Ceramic Tint 35% on the drive and passenger door fronts. 20% on the back window and two rear seat windows. Windshield done with 70% The main purpose of all of these were the UV and Heat Protection

At 1742 Miles I had a Bullet Liner bed line done. $450 dollars (plus tax) out the door and I have to say this stuff I love (highly recommed)

Last but not least at 2800 Miles I had the following paint done to the truck

Big Chrome Piece on Grill painted body color Left the 3 brushed alum look bars stock
Front Tow Hooks pulled and replaced with Ford Black ones (still have the chrome ones, trying to decide what to do with them)
The front Ford Badge is Carbonized Gray and Black. The rings and Ford are Carbonized Gray, Oval itself is Black. As a side note the one in the rear is exactly reverse of that. Why you ask? Well its against the carbonized Gray of the body so the rings (especially the outer one) needed to be back resting against the body to pop.

I replaced the window trim on the top of all 4 doors with black OEM parts to get rid of the chrome strips
Ordered back Mirror caps and then had them painted body color
Had the two side vents painted body color on the F350 and the Outer Ridge. left the center black and the Platinum bad stock (see pics)
Had the chrome edge of the power steps wrapped black.
Left the Powerstroke and 6.7 stock
Replaced the Tremor Sticker with one from Signville
All 4 door handles painted body color
Rear Platinum Applique painted body color with the Platinum and Superduty left brushed aluminum look.

The overall idea was to replace all shiny chrome from the body but leave enough of the brushed look to tie into the wheels with the touch of chrome in them.

I should add the entire front clip (aka nose, lights, etc) have all been clear bra'd as well as the mirror caps, the door handle behinds, the door edges and the step ins.

left to do:

I still need to do the Forscan things I want to but that one scared me a bit. I might need to hire an expert to help me (contact me if you are good with this one and are willing to help me - Willing to compensate you for this)
Install Baja Design 2020+ Ford Super Duty Dual Fog Pocket Kit SAE Amber / Sport White / Plug N' Play / Upfitter as well as the
Baja Design Squadron Sport Flush Mount LED Cube (rear bumber install) Amber Lens

Buy and install Access Bed Cover

Factory Exhaust painted Flat Black or back end piping replaced with a banks 4"

Factory rear cab Light painted Nite-Shades

Anyway, check out all my pics and hope you enjoy. I took these today on top of a hill along the edge of Nebo Loop in Central Utah

View attachment 46091
View attachment 46094View attachment 46095View attachment 46096View attachment 46097View attachment 46098View attachment 46099View attachment 46100View attachment 46101View attachment 46102View attachment 46103View attachment 46104
I really like the photo of the Tremor logo with the mountain range peeking over the bed.
 
I really like the photo of the Tremor logo with the mountain range peeking over the bed.
Or should I say… “peaking” 🤣😏
 
Ha ha Peaking works and thanks. I have absolutely loved every minute if my truck so far. Had it since Dec 7. So not to far from 5 months
 
Back
Top