What did you do to your Tremor today?

I finally got the grill and mirror caps painted. I also added the recon scanning mirror lights. I’m still debating on getting color matched emblems and badges.
D4C89B4A-8EFA-4D8D-9B54-3EAF1B967F9B.jpeg
 
Finally got around to installing my onboard air system. Got a kit from Kleinn air horns. Airy system only. No air horns. Took the better part of the day but it all went together well. Didn’t come with a plug to block off the air horn port but everything else was there. I’ll eventually use that port for air bags. Because I’m a ham fisted gorilla I broke the fitting for the remote air coupler so I’ll need to source a new one. Tank mounts ahead of and above the spare tire out of the way. Compressor mounts on the inboard frame rail next to the tire On the passenger side. It’s triggered by the number 6 upfitter switch. More pics to come.
628C98DB-C212-4183-9686-BDC8768DC9DA.jpeg
 
Last edited:
Bought a new kennel for the dog when he’s in the truck. Our last vehicles he’s always been free to roam, but that comes with the cost of scratches and hair everywhere (90 lb German Shepherd)

Also tried out our trusty 50 qt ARB fridge and it both fits and works from the outlet. In my 4runner I had it directly connected to the deep cell battery, so it’d continue to stay cool with the vehicle off. Right now we only use it for really long trips until we get to our final location with a fridge, so it works fine. We’ll swap the factory batteries out with deep cells at some point and hardwire this to the battery.
 

Attachments

  • DC2EE332-120B-49F3-A9B8-FEBA1F82BF8D.jpeg
    DC2EE332-120B-49F3-A9B8-FEBA1F82BF8D.jpeg
    322.5 KB · Views: 173
  • 46F6886D-5CC1-429F-A91C-C6FD10A32571.jpeg
    46F6886D-5CC1-429F-A91C-C6FD10A32571.jpeg
    282.1 KB · Views: 171
Bought a new kennel for the dog when he’s in the truck. Our last vehicles he’s always been free to roam, but that comes with the cost of scratches and hair everywhere (90 lb German Shepherd)

Also tried out our trusty 50 qt ARB fridge and it both fits and works from the outlet. In my 4runner I had it directly connected to the deep cell battery, so it’d continue to stay cool with the vehicle off. Right now we only use it for really long trips until we get to our final location with a fridge, so it works fine. We’ll swap the factory batteries out with deep cells at some point and hardwire this to the battery.
nice, Ruff Land makes a good kennel. I had 3 in the back of the 150. And am trying to set up the Tremor. Kennel is also the safest way to transport.
 
Looks much nicer than the stock IC. How's the power feel after the install?
Thanks. It spools up quicker, I need to get an EGT gauge to see how cool it keeps the temps. Mostly just preparing for the future. ;)
 
Got my Rear Warn Bumper sandblasted and Powder Coated then installed. I still have to adjust the brackets that hold the rear bumper as they are not level from Factory. The passenger side is lower than the drivers.

I also installed the backflip and the Royalty Core headache rack from my 2018.
 

Attachments

  • D096C084-AFA2-4ABB-BC52-B207D294839B.jpeg
    D096C084-AFA2-4ABB-BC52-B207D294839B.jpeg
    420 KB · Views: 266
  • F700416A-BAF1-43D5-9F2F-A5566C4E4D04.jpeg
    F700416A-BAF1-43D5-9F2F-A5566C4E4D04.jpeg
    272.9 KB · Views: 262
Got my Rear Warn Bumper sandblasted and Powder Coated then installed. I still have to adjust the brackets that hold the rear bumper as they are not level from Factory. The passenger side is lower than the drivers.

I also installed the backflip and the Royalty Core headache rack from my 2018.
Link to bumper? I like the LED and the step, I did not order tailgate step as it seemed like a lot be taking down and up all the time with another metal item to rattle.
 
Bought a new kennel for the dog when he’s in the truck. Our last vehicles he’s always been free to roam, but that comes with the cost of scratches and hair everywhere (90 lb German Shepherd)

Also tried out our trusty 50 qt ARB fridge and it both fits and works from the outlet. In my 4runner I had it directly connected to the deep cell battery, so it’d continue to stay cool with the vehicle off. Right now we only use it for really long trips until we get to our final location with a fridge, so it works fine. We’ll swap the factory batteries out with deep cells at some point and hardwire this to the battery.
Goose gear are bringing out a rear seat delete for the 350 next year which I can’t wait for. I am looking and getting a custom dog cargo area and draws in the rear
 
Link to bumper? I like the LED and the step, I did not order tailgate step as it seemed like a lot be taking down and up all the time with another metal item to rattle.
 
Got my Rear Warn Bumper sandblasted and Powder Coated then installed. I still have to adjust the brackets that hold the rear bumper as they are not level from Factory. The passenger side is lower than the drivers.

I also installed the backflip and the Royalty Core headache rack from my 2018.

That bumper looks really good and I'm sure that step with be handy.
 
Picked up a RAM mount for my 11” iPad Pro. Normally mount my phone here, but the iPad will be nice on long trips and if I want to use other map app’s.
 

Attachments

  • E4EABF48-81B9-48F8-BB31-B06EDF581C19.jpeg
    E4EABF48-81B9-48F8-BB31-B06EDF581C19.jpeg
    264.9 KB · Views: 175
  • F56A6190-F0EA-4F26-9CE1-CB5A511FEA6A.jpeg
    F56A6190-F0EA-4F26-9CE1-CB5A511FEA6A.jpeg
    216.7 KB · Views: 170
Back
Top