What did you do to your Tremor today?

I also received and installed my Weigh Safe Steel 6" drop hitch draw bar. Very pleased with the quality and very substantial construction. This is their all steel version and is rated for 18000#. It came with 2" and 2 5/16" SS balls.
1628798754711.jpeg
1628798785048.jpeg
 
8E7C6D14-618E-4D54-833B-2E18E0A74386.jpeg

Installed some rock tamers and finished the track system on the trailer to secure the Ranger. Likely will trim a bit off the flaps, but we’ll see. Really like the fact that I don’t have to compress the suspension to trailer it across country anymore. The Tremor makes my old 4Runner look like a quad. Haha. About to take the rig out for a test drive!
 
I have a topper with a side door and built a simple box in the back of the truck to collect all the junk in one place.

The chains, shovel, straps, winch kit, etc. all go in the box and disappear out of sight until I need it. Leaves the under seat storage for rifles and such when hunting. The box can be taken out and put back in in seconds and I still have 4’ between it and the wheel well.
904416F1-8850-4E9A-A2BD-32E10AA3C35C.jpeg

F1A424C4-22B5-4D93-BE79-BE285494A21C.jpeg

A0A8457A-FE36-4C9D-B6B6-723351961884.jpeg
 
Been a while since I posted any progress of my Tremor here but to catch up, about a month ago I put the winch on.... that took me a day to do. Installed a black hood deflector (the bugs and rock chips were getting to me) and then most recently did a small wrap on the truck... I'm loving the look of the truck now. In a month or two she'll be getting a Carli Pintop kit and 38's with Method wheels. Then she's getting an AluCab Canopy Camper with awnings and going to be at Overland Expo East in Virginia for the show there. Hope to catch some of you Tremor owners out there in the fall.
IMG_3861.JPG
 
Did you do a ceramic tint on yours? Also did you do the windshield as well?
I just did regular tint. None on windshield. This was done by a local guy that came to my house and cost $120. For ceramic it would have required dropping truck off at a tint shop and $400.
 
I finally decided, due to the day of steady rain, to grow a set and start in my Rigid SR-Q Pro flush mount reverse lights. I measured about 100 times and then made the commitment. Not and easy decision, but what’s a new bumper if I screw up anyway right? I drilled and then made the cuts with a jigsaw. Finished it with a dremel.
Shoutout to @Nick@ApolloOptics for hooking me up with the lights and harness. He’s a great dude and is very helpful! I’d recommend buying off him anytime in the future, and I intend to buy from him again.
I got some black touch up to with clear at a local shop to seal the cut edges and drill holes. I’ll mount up tomorrow! Hopefully all goes well! 🍻🥃😎
442BF5F8-1EDA-4FE2-B643-F79F35086BC7.jpeg
66091876-A704-4F50-98FE-829D513AEB75.jpeg
0F503C78-D1EE-4799-B1C6-0A9A102759FE.jpeg
5A6E34D9-ACD4-466E-B795-7DFF8DAFDA21.jpeg
B89B0F12-D273-4362-AEA2-DF8D375D8180.jpeg
 
Last edited:
I finally decided, due to the day of steady rain, to grow a set and start in my Rigid SR-Q Pro flush mount reverse lights. I measured about 100 times and then made the commitment. Not and easy decision, but what’s a new bumper if I screw up anyway right? I drilled and then made the cuts with a jigsaw. Finished it with a dremel.
Shoutout to @Nick@ApolloOptics for hooking me up with the lights and harness. He’s a great dude and is very helpful! I’d recommend buying off him anytime in the future, and I intend to buy from him again.
I got some black touch up to with clear at a local shop to seal the cut edges and drill holes. I’ll mount up tomorrow! Hopefully all goes well! 🍻🥃😎View attachment 30949View attachment 30950View attachment 30951View attachment 30952View attachment 30953
Yeah that took some balls! Interested to see how it turns out. (y)
 
Back
Top