What did you do to your Tremor today?

You missed a spot and I think you have a leak 🤪
20240707_195145 - Copy.jpg


the solar panels leak, its odd. Also best wax job I've done, look at them beads after the hail storm. was really clean rain.
 
I've got a full custom drawer system going into the back of the truck this weekend. About 200L (50gal) of water. Propane for the hot water heater, 200ah of lithium power, fridge slide, the works. Can't wait to test it out. I'm trying to route the sink drain to one of the 5th wheel holes so I don't have to attach a drain pipe each time.
1000120309.jpg
 

Attachments

  • 1000105723-01.jpg
    1000105723-01.jpg
    110.8 KB · Views: 34
I added a cheap console cover for my 23, will post pics later when i take them; cheap but will do the job keeping summer sweat away.

This is what he 👇did to his tremor today. I guess this s@@t does happen after all…

View attachment 161761

The problem is people are REQUIRED to hit a selection button on the fuel pump. Regardless of the HANDLE you are holding....The buttons are labeled for the fuel product you are selecting.

Grab the gas fill handle, hit the DIESEL button....GUESS what happens! Nothing. Hit the 89 button...OMG you put gas into your tank. WOW Grab the diesel fuel handle....hit the 89 button...guess what happens...NOTHING! Do we need to make an instructional video ??? :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO:

So as people love to read about drama, people will CREATE drama for fun and excitement.
 
The problem is people are REQUIRED to hit a selection button on the fuel pump. Regardless of the HANDLE you are holding....The buttons are labeled for the fuel product you are selecting.

Grab the gas fill handle, hit the DIESEL button....GUESS what happens! Nothing. Hit the 89 button...OMG you put gas into your tank. WOW Grab the diesel fuel handle....hit the 89 button...guess what happens...NOTHING! Do we need to make an instructional video ??? :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO:

So as people love to read about drama, people will CREATE drama for fun and excitement.

I explained the same thing here, with a photo of the actual pump i stood in front of.

 
Washed the K&N cabin air filter. Cleaned with compressed air and then dawn+water in a tank.

(part # VF2049)

JCQIfh7.jpeg
Oh they make a cabin filter? How well does it perform on odors and dust? The OEM ones are quite expensive
 
Oh they make a cabin filter? How well does it perform on odors and dust? The OEM ones are quite expensive
Similar to OEM. It's neither a carbon activated nor a HEPA filter, so the air flow will be really good, but not meant for odors really.
 
Finally got my DiamondBack (thanks @uwbadger ) looks awesome!

I also installed the leather trim pieces, very easy and very solid, no more squeaking. I remember someone talking about the gap to the console, the picture does show a decent sized gap but the camera is playing tricks with shadows I believe. If you zoom in you can see there is no gap, it is butted right up against the console.
 

Attachments

  • IMG_8351.jpeg
    IMG_8351.jpeg
    492.8 KB · Views: 100
  • IMG_8349.jpeg
    IMG_8349.jpeg
    286.4 KB · Views: 101
  • IMG_8350.jpeg
    IMG_8350.jpeg
    420 KB · Views: 100
Similar to OEM. It's neither a carbon activated nor a HEPA filter, so the air flow will be really good, but not meant for odors really.

It took me a long while to realize that while hepa or carbon ones might have some benefits they do restrict airflow which at least to me outweighs all their benefits. It’s all about airflow at lowest settings….
 
How do you avoid scratches when removing the plastic trim? Did you have instructions to go by removing the piece?
You just slip a trim removal tool behind it and it starts to pop right off. I started closest to the console.
 
Installed the bulletpoint mounting solutions mount a few days ago. Thought the phone sat too high at first but it's grown on me. They are increasing wireless charging speeds next iPhone so I decided to wait on the charger attachment until they support the faster spec. I'll be adding an iPad for trail mapping in the future and maybe a GoPro so I love how flexible it is for more than 1 device
 

Attachments

  • PXL_20240712_000805677.jpg
    PXL_20240712_000805677.jpg
    268.6 KB · Views: 52

Latest Discussions

Back
Top