What did you do to your Tremor today?

I installed a couple of cell phone holders today and I wanted to install a powerpoint under the plate but there is no room there any more. The space between the head unit, buttons, etc there's not enough room any more. What are others doing on MY23/24 for this?

I don't want to have wires hanging down the face of the dash......

att.R9ozcUHz00TjVWKN0Y_yzgDSvqHJArDUp56f8ysSVv8.jpg
 
I installed a couple of cell phone holders today and I wanted to install a powerpoint under the plate but there is no room there any more. The space between the head unit, buttons, etc there's not enough room any more. What are others doing on MY23/24 for this?

I don't want to have wires hanging down the face of the dash......

View attachment 161517

@Chris-DTA just put one in his, it is in his build thread.

 
@Chris-DTA just put one in his, it is in his build thread.

Great stuff! Will need to see how his turns out. I need to be able to get Fast Charging out of this.
 
I installed a couple of cell phone holders today and I wanted to install a powerpoint under the plate but there is no room there any more. The space between the head unit, buttons, etc there's not enough room any more. What are others doing on MY23/24 for this?

I don't want to have wires hanging down the face of the dash......

View attachment 161517
I went with course Motorsport wireless charger. Ran a low profile USB-c behind the upper trim piece and behind the infotainment screen, then fished it under the slide by the wireless charger area. Very happy how clean it looks
IMG_2452.jpeg


IMG_2453.jpeg

IMG_2461.jpeg
IMG_2459.jpeg
 
How did the button swap take fordpass points? Help a newb out... whats the associate forscan change?
 
So, i've read that before. Thats where i gained my knowledge on this. Which is why i'm confused b/c no mention of purchasing something or modifying something in forscan is mentioned in said thread. 🤷‍♂️
 
So, i've read that before. Thats where i gained my knowledge on this. Which is why i'm confused b/c no mention of purchasing something or modifying something in forscan is mentioned in said thread. 🤷‍♂️
Agree, those points still have me confused...
 
Installed two PMF 1/4 spacers in the front drivers side coil spring today to eliminate the Super Duty lean to the left that was driving me crazy.
 

Attachments

  • 20240702_172056.jpg
    20240702_172056.jpg
    327 KB · Views: 29
You got a part number for those? Kind of curious what my upholstery guy would charge to recover them in KR leather.

Don't bother recovering them, buy them in King Ranch Leather

FORD PARTS ON SALE

OEM FORD PARTS DIRECT


Screenshot 2024-07-03 122136.jpg


The part numbers are

PC3Z-2604608-CB (right) - BLACK
PC3Z-2604609-CB (left) - BLACK

PC3Z-2604608-CA (right) - MESA - Confirmed to be for KING RANCH - $30.33
PC3Z-2604609-CA (left) - MESA - - Confirmed to be for KING RANCH - $43.58

PC3Z-2604608-EA (right) - LIGHT SLATE
PC3Z-2604609-EA (left) - LIGHT SLATE

PC3Z-2604608-AF (right) - KRYPTO GREY
PC3Z-2604609-AF (left) - KRYPTO GREY

Screenshot 2024-07-03 122929.jpg



Here is an entire thread dedicated to this:

TRIM THREAD



.
 
Moving on to installing the Bulletpoint Rubigrid panel in the dash. It takes up the whole thing (unlike Builtrights, but was cheaper) so i bought these low profile usb c outlets to provide power. Need to test them though.
These outlets work really well but only take 5V input. Therefore you'll need a buck converter.
So, im changing directions as I dont want my usb c outlets limited to 15W.
 
Got the new Black Rhino wheels mounted today really happy with the look and offset with how they fill put the Buschwacker Fender Flares. Gives the truck alot more presence in person.
 

Attachments

  • 20240703_133835.jpg
    20240703_133835.jpg
    643.3 KB · Views: 81
  • 20240703_133849.jpg
    20240703_133849.jpg
    707.7 KB · Views: 81
  • 20240703_133947.jpg
    20240703_133947.jpg
    747.1 KB · Views: 71
  • 20240703_133918.jpg
    20240703_133918.jpg
    480 KB · Views: 81
Back
Top